Haloman363

Creature creations 3D

Rust logo led light box &nbsp;Length: 222.25 mmHeight: 100.08 mmWidth: 38.1 mm&nbsp;I used these leds <a target="_blank" href="https://www.amazon.com/dp/B0CJ987LRC?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Amazon.com: GXILEE USB Led Light Strips with Remote for 32-65inch TV Backlight, 5v Led Strip Lights 10 ft for Indoor Decoration : Tools & Home Improvement</a> should fit most usb powered led light strips

Rust logo Light box AMS ready

Rust

Infinity 3D Prints

a cup marking station for eventsSome ca glue on the sides of the front plate does a great job on bonding them together . No need for a ton of glue . Less is more  :)

mark your cup and drink up station

Lan Party

Many24

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/2415104395/draft/2023-09-27_k4g16gb27zyu.png"></figure>I really liked the idea of CouchConsole organizer, but wanted to put my Prusa Mini in use, so I designed 3D printable version.<h4>2 sizes depending on your printer / preference:</h4>Prusa Mini: 180mm (max bed size) - I used this modelPrusa i3 and similar: 210mm - not tested<blockquote>210mm version does not include the spacer (short insert cover) due to the size, so the short inserts are slightly longer to prevent movement.</blockquote><h4>Features:</h4>Long insert cover can be used as a phone stand and to hold your glasses, controller or remote:<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/2415104395/draft/2023-09-27_k7y8na1bu10b.png"></figure>Spacer (180mm version only) used to devide the 2 small insert or as a cover for one of them:<figure class="image image-style-align-center image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/2415104395/draft/2023-09-27_w319tjsa659s.png"></figure>Inserts to store you snacks, chips, candy. Even in the 180mm version, the long insert can fit an Xbox Series controller<figure class="image image-style-align-center image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/2415104395/draft/2023-09-27_iqtqp2354ax5.png"></figure>0,2mm clearance on all the parts ensures good and tight fit without big movement.<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/2415104395/draft/2023-09-27_6dhivtu3it99.png"></figure>Chamfered bottoms for the best printability.<figure class="image image-style-align-center image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/2415104395/draft/2023-09-27_4ur8eqmpu636.png"></figure><h4>Tips:</h4>Use ironing for top layers to have better looks.Use variable layer hight to reduce print time and increase details where it matters.<h4>Print instructions</h4><ul><li>I used PLA, but any material will do</li><li>Supports needed for “Cover” and “Cover_long”</li><li>Designed for 3 perimeters with 0,6mm nozzle</li></ul>

Snacker - Your Gaming / TV buddy

sort

zoroseerus

if you want to use these commercially I recommend checking out Jagex&#39;s post on it:<a href="https://www.jagex.com/en-GB/terms/fancontentpolicy" rel="nofollow">https://www.jagex.com/en-GB/terms/fancontentpolicy</a>&nbsp;

OSRS Old School Runescape Potion Storage

Runscape

Gunner Lee

A bolt action pen that uses the standard Pilot G2 insert. The 0.2mm nozzle allows for precise tolerances that allow the bolt and threads to work seamlessly. The pen can be printed all in one plate or separate to print colors to mix and match each part. The Pilot G2 can be purchased at any office supply store and is widely available, making this a highly accessible EDC pen.

Bolt Action Pen

Desk Items

BigSmoke

<ul><li>Hi! I designed a simple Oculus Quest 2 stand. Its durable, and easily holds the weight of the headset. </li><li>My print was made with PETG (haven't tried it with PLA, so i recommend increasing the infill by 5-10%). </li><li>The small parts are a very tight fit, so you can scale them +/- 3% to make them fit easier.</li><li>I also used supports for the bottom overhangs and big holes, which i recommend doing. </li></ul>Enjoy the printing!

Oculus Quest 2 Stand

fay3dlab

It time for another suspended model.. this time i'm making the batman's batsignal.. I've intergrated the Bambu Lab LED kit into the batsignal.. so you just have to buy the kit from bambu store and you are done.. Printing this in multicolor so that you can use transparent filament for some of the model to make the model pop out.. And it would make the batman logo looks like it actually floats..&nbsp;<blockquote>If you're thinking of buying the LED kit.. please do support me by using my affliate link here.. <a target="_blank" href="https://shrsl.com/4g18i" rel="nofollow noopener">LED LAMP KIT 001</a> every little things helps me out..</blockquote><figure class="table" style="height:162.344px;width:960px;"><table style="background-color:rgb(255, 255, 255);border:1px double rgb(179, 179, 179);"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">If you would like to support me, you can join me on my <a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener">buymeacoffee</a> page..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">By joining me as a supporter.. you'll be able to get behind the scenes informationon my current projects as well as future projects..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">And if you're looking to sell my prints.. you can join my merchant membership tier as lowas USD10 a month..</td></tr></tbody></table></figure>

Suspended Batsignal with LED kit 001

Batman

Collecticraft

<h2>NObody Yoga: A Serene Journey</h2>Embark on a journey of self-discovery with Nobody Yoga, a captivating sculpture designed to evoke a sense of peace and mindfulness. 3D sculpted with precision and care, this exquisite piece captures the essence of yoga practice in its graceful form and intricate details.<h3>Key Features:</h3><ol><li>Serene Sculpture: Nobody Yoga is a mesmerizing blend of artistry and tranquility, inviting you to find inner peace through its elegant design.</li><li>Mindful Detailing: Each curve and contour of the sculpture is meticulously sculpted to reflect the fluidity and grace of yoga poses, creating a harmonious aesthetic.</li><li>Inspirational Essence: With its serene presence, Nobody Yoga serves as a reminder to embrace the present moment and cultivate mindfulness in your daily life.</li><li>Supportless challange: The file is actually splitted into pieces but if you find the right settings you can easly print it supportless</li><li>Commercial License: <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patrons</a> also gain access to a commercial license, allowing them to explore their own creative projects with the beauty and inspiration of Nobody Yoga.</li></ol>Elevate your space and nurture your inner peace with Nobody Yoga. Join us on <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patreon</a> to discover the beauty of mindfulness in art.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/794173/2024-03-23_2587d31be8a9e.jpeg"></figure>

NObody Yoga: A Serene Journey 

Statue

Travis

I&#39;m a big fan of the Fallout game series. The latest release of Amazon&#39;s Fallout series energized the nerd inside of me to create this bit of my very own Vault-tec Pip-Boy techiness to dress-up my Apple Series 7 Watch (45mm).&nbsp;I included pics of the process to install the buttons and insert the button-side of the watch into the Pip-Boy before snapping the rest of the face onto the watch. The included print profiles include snug supports for a few overhanging areas and those are quick and easy to remove without needing tools. Please note that one profile is for a standard 0.4mm nozzle while the other is for a 0.2mm nozzle. The 0.2mm nozzle print profile includes updated tolerances for the supports since they need to be smaller to accommodate the .22mm layer width and 0.1mm layer height.&nbsp;Enjoy and let me know what you think.&nbsp;I used the Facer app for the Pip-Boy screen: <a target="_blank" href="https://apps.apple.com/us/app/watch-faces-by-facer/id1057071179" rel="nofollow noopener">https://apps.apple.com/us/app/watch-faces-by-facer/id1057071179</a>!!! ULTRA version here: <a target="_blank" href="https://makerworld.com/en/models/477933#profileId-389029" rel="nofollow noopener">https://makerworld.com/en/models/477933#profileId-389029</a><h4>You can try uniformly scaling the entire model (with buttons and knobs selected) to the following percentages based on your watch size:</h4><ol><li>44mm: scale to 97.77%</li><li>42mm: scale to 93.33%</li><li>41mm: scale to 91.11%</li><li>40mm: scale to 88.88%</li><li>38mm: scale to 84.44%</li></ol>EDIT: 5/1/2024I uploaded a 44mm version that should fit the Apple Watch SE quite nicely and added two new print profiles to support it. One profile is for a 0.4mm nozzle and the other is for a 0.2mm nozzle, specifically on an A1 mini, but should work on other Bambu Lab printers.&nbsp;EDIT: 5/6/2024I created a version 2 that includes knobs, by popular request.  The knobs have a small amount of threading to keep them firmly attached.&nbsp;EDIT: 5/20/2024I added a new print profile with the version 2 model scaled according to the chart from above.  The print profile is the “38mm to 45mm v2” and there&#39;s a profile for a 0.4mm nozzle (default nozzle size on Bambu printers) and the 0.2mm nozzle for those of us playing with finer detail.

Pip-Boy for Apple Watch

Apple

JabHook

*UPDATED FILE 3-7-2024&nbsp;I have worked on this model since it was placed here and am releasing version 2 - The lid has a major update where it now will snap together which enables the tumbler to have a nice clean look and the lid fits flush with the cup brim.  tree supports are added where needed.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/658611/2024-03-07_cc0b77770ff58.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/658611/2024-03-07_0a351c94d6685.jpeg">Assembly for the lid -  grab a small pliers and remove the little support under the middle of the top lid piece.  place a small dab of glue in there and snap the bottom part of the lid to that.  let it dry and you are all set to go.&nbsp;&nbsp;Here is a replica of the famous Stanley tumbler but in a keychain version.There is storage inside so you can keep your daily pill(s) if you are on the go, a folded bill (money), earrings, or other small items.&nbsp;Have fun!

Tumbler keychain - Stanley version, storage inside for pills, cash, or small item

Stanley

wuguigui

<h2>Summary</h2>Updated 12/01/2023 I got some feedback that the action easy to get stuck, I make a new holder and test it, working better so far. you can download the new file "Alien-InnerJaw-Holder-replacement" to replace the old one. hope it will solve the issue. ——————————————————————————————— Updated 12/10/2022 I forgot to upload teeth models, now is fixed. It seems not in the Zip file, but you can find it on the "Thing Files" page. ——————————————————————————————— This a pen holder remixed from my shark pen holder at:<a target="_blank" href="https://makerworld.com/en/models/12914" rel="nofollow noopener">https://makerworld.com/en/models/12914</a>The inner tongue part inspired me to make it as the inner jaw of "Alien".Watch the video to get more information: <a target="_blank" href="https://www.youtube.com/watch?v=O6A9UfNHVDA" rel="nofollow noopener">https://www.youtube.com/watch?v=O6A9UfNHVDA</a> Assembly video: <a target="_blank" href="https://www.youtube.com/watch?v=bEa33O5jcpQ" rel="nofollow noopener">https://www.youtube.com/watch?v=bEa33O5jcpQ</a>There is another cute Shark Magnet download free at: <a target="_blank" href="https://makerworld.com/en/models/12912" rel="nofollow noopener">https://makerworld.com/en/models/12912</a>Frog pen holder:<a target="_blank" href="https://makerworld.com/en/models/12925" rel="nofollow noopener">https://makerworld.com/en/models/12925</a>The pen in the video is unique, it has a 3D-printed spring inside the body, so it can be rotated open without a metal spring. It can be downloaded free at: <a target="_blank" href="https://makerworld.com/en/models/12916" rel="nofollow noopener">https://makerworld.com/en/models/12916</a>This is another lovely Comper Flower Pen Holder(<a target="_blank" href="https://www.youtube.com/watch?v=uEX0pGA_kXs" rel="nofollow noopener">https://www.youtube.com/watch?v=uEX0pGA_kXs</a>) at: <a target="_blank" href="https://www.cgtrader.com/3d-print-models/gadgets/office/chomper-flower-pen-holder" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/gadgets/office/chomper-flower-pen-holder</a> or <a target="_blank" href="https://www.myminifactory.com/object/3d-print-246524" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-246524</a>Enjoy it!

Alien Pen Holder

Alien

kace3d

Time travel device for all of you who know what this is.Print in place, no supports needed.Each part in the model can be recolored as you like as many colors as you want.Model has mounting hole on back side to hang on wall.I added some small wires I had laying around to add a unique touch.Your results (relating to time travel and all associated butterfly effects) may vary. Proceed with caution.Model measures approximately 170mm x 201mm x 30mm&nbsp;If you'd rather print this in parts and assemble/glue together to save so many filament changes and purge poops, please see my <a target="_blank" href="https://makerworld.com/en/models/134445#profileId-145911" rel="nofollow noopener">parts version here</a>.

Time Travel Device Flux Capacitor

Movies

So i just got myself the LED lamp kit and was looking for a cool lamp shades to print for it.. then i came across someone making a incubator like cylinder with an alien in the middle using resin.. i thought it was a great idea.. and so i design one for myself.. but of cause i want to make a suspended version of it.. Then i remembered finding a baby raptor model on makerworld.. it was made for resin printing.. so i low-poly the raptor and added the baby raptor blue and turned it into a suspended model.. i had to split the raptor in 2 and added supports to the hanging hands.. legs and tail.. so it might look weird if you look closely..&nbsp;<figure class="table"><table><tbody><tr><td>:UPDATE: it turns out that the user who shared the raptor model on makerworld is not the owner of the 3D model.. he shared the file without authorization.. The owner reached out to me and told me what the user had done.. the owner of the 3d model is <a target="_blank" href="https://www.turbosquid.com/Search/Artists/wofle" rel="nofollow noopener">wofle</a> from turbosquid.com.. and he gave me permission to share my remixed version of the raptor as long i dont sell it commercially.. so thank you Mr Wolfe for sponsoring your awesome raptor model for my suspended models..</td></tr></tbody></table></figure> i modelled the incubator using Tinkercad and added the LED kit on the bottom.. so the LED light would shine through the bottom grill of the incubator cylinder and light the suspended baby raptor in the middle..<img src="https://makerworld.bblmw.com/makerworld/draft/681411/2023-12-15_2b30871ab39c9.gif"> If you have an AMS i recommend printing some of the incubator parts with transparent filament like i did for the bottom base.. so that the LED would shine through it and make it more cool.. in my opinion.. Assembly is fairly simple.. you just need to be careful when adding the square peg into the raptor's body.. it should fit loosely.. the peg is just used to hold the 2 half of the raptor aligned.. the bottom parts should fit tight.. and the top slightly loose.. the base where you insert the LED kit should fit loosely to the middle base.. so that you can turn your raptor to whichever position you'd like without the wires in the way..  <blockquote>If you're thinking of buying the LED kit.. please do support me by using my affliate link here.. <a target="_blank" href="https://shrsl.com/4g18i" rel="nofollow noopener">LED LAMP KIT 001</a> every little things helps me out..</blockquote><figure class="table" style="height:162.344px;width:960px;"><table style="background-color:rgb(255, 255, 255);border:1px double rgb(179, 179, 179);"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">If you would like to support me, you can join me on my <a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener">buymeacoffee</a> page..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">By joining me as a supporter.. you'll be able to get behind the scenes informationon my current projects as well as future projects..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">And if you're looking to sell my prints.. you can join my merchant membership tier as lowas USD10 a month..</td></tr></tbody></table></figure>

Suspended Baby Raptor Incubator LED Lamp

Jurassic Park

3dmieks

300% Brick Batman&nbsp;I have the model so you can print it with no AMS but the 3MF files has the chest logo with AMS, but you can do a filament change on layer to get the same effect.&nbsp;I have the best supports setup per plate and support blockers&nbsp;Individual Models also included!&nbsp;&nbsp;

300% Brick Batman

misenique

We all know and love the original Subnautica Flora and Fauna.As part of the Animal Frenzy Festival, I decided to make a articulated Ghost Leviathan, since I could not find it anywhere in the 3D printing community.&nbsp;The model is scaled to the max build plate size of the X1/P1/A1. The A1 Mini profile is scaled to max for the Mini.&nbsp;The max scaled model on the X1/P1/A1 is about 350mm long (curled up on buildplate).&nbsp;I took the head of the original Subnautica model, changed it to be printable. The moveable parts are created with Fusion 360 and ZBrush.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447408/design/babfc455-f5b2-4219-8d8e-48281638d240.gif" alt="Feed Meeeeeeeeeeeeeeeeeeeeeeeeeeeee GIF - Feed Meeeeeeeeeeeeeeeeeeeeeeeeeeeee Ghost Leviathan GIFs"></figure>

Articulated Ghost Leviathan Flexi Subnutica

Gamer

SabreDesign

Modern easter bunny decoration. The model is 110 mm tall, can be scaled up to your liking. The inside of the model is hollow to save on filament.&nbsp;If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile:<img src="https://makerworld.bblmw.com/makerworld/draft/836500/2024-03-09_3031dfb02454e.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836500/2024-03-04_f1cfd27f8e9d5.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836500/2024-03-02_bdab38c1e474e.png">&nbsp;&nbsp;&nbsp;

Easter bunny

Easter

Raybesh

<h2>Intro</h2>The Sierpiński Pyramid is a 3 dimensional manifestation of the Sierpiński triangle. It&#39;s a fractal, that is subdivided recursively into smaller and smaller pyramids. In (mathematical) theory it goes on and on into infinity, which means you would be able to zoom in infinitely and still see more little pyramids. Unfortunately we live in the real world where there are no mathematically precise fractals. The next best thing we can do is to show a subset of the fractal.<h2>Print Settings</h2>The Pyramid is printed in Vase Mode. With that said, it&#39;s incredibly sturdy. I wouldn&#39;t be afraid to literally throw a level 6 pyramid around.<h2>Versions</h2>I&#39;ve uploaded different recursion depths (or levels if you want to be one of the cool kids) which show off the beauty of the Sierpiński Pyramid.For every level you go deeper, the longer it&#39;s going to take (like in inception) and the more filament it&#39;s going to use (not like in inception). In the print profile you can find the levels 3 to 6, which go from 6.5 minutes to a whopping 14 hours. I recommend printing a lower level first to check if everything is alright with the printer (and you).&nbsp;I&#39;ve also uploaded the different levels with a base layer and without base layer. The one with base layer is more stable since it it can&#39;t bend at the bottom, it also helps with the first layer sticking. The one without base layer prints faster and uses less filament, although the difference is basically negligible. See Print Info below to compare. The version with base layer also gives you the added bonus of creating a Sierpiński triangle when held up against the light.<h2>Parametric adjustments</h2>Maker World introduced the option to adjust parameters with OpenScad files. Unfortunately rendering a Sierpiński pyramid takes ages, and the model generator already gives up at level 5.<h3> Parameters</h3>level: the level of the pyramid side_length: the side length of the unit pyramid, that is the smallest unit of pyramid in the fractal. By default it&#39;s 1.875 which causes a level 3 pyramid to have the side length of 15mm. The formula for calculating the side length is `{side_length} * 2^{level}` so if you were to choose a side length of 2.5mm, then level 4 would be `2.5 * 2^4 = 40mm`. overlap: the overlap between unit pyramids. Setting this to 0 would create a perfect mathematical Sierpiński pyramid, however it would be impossible to print since nothing is connected and therefore everything would be floating. Setting this too high ends up making the fractal look less detailed. base_height_ratio: this is the ratio of the base to the height (parallel to Z axis). By default it&#39;s the square root of 2 which causes the pyramid to be equilateral. Setting this to `pi/2` gives you the ratio of the pyramids of Giza (presumably) base_offset: By default this is 0, which gives you a model with a base layer, the higher this is, the more of the bottom is cut away. The range of this variable is [-1:infinity (probably)]<h2> Print Info</h2>(On the A1 &amp; according to Bambu Studio) No Base<figure class="table"><table><tbody><tr><td>Level</td><td>Time</td><td>Filament</td></tr><tr><td>3</td><td>6m32s</td><td>0.25g</td></tr><tr><td>4</td><td>27m37s</td><td>1.32g</td></tr><tr><td>5</td><td>2h25m</td><td>7.69g</td></tr><tr><td>6</td><td>14h00m</td><td>45.88g</td></tr></tbody></table></figure>With Base<figure class="table"><table><tbody><tr><td>Level</td><td>Time</td><td>Filament</td></tr><tr><td>3</td><td>6m47s</td><td>0.27g</td></tr><tr><td>4</td><td>28m27s</td><td>1.39g</td></tr><tr><td>5</td><td>2h28m</td><td>7.99g</td></tr><tr><td>6</td><td>14h18m</td><td>47.42g</td></tr><tr><td>7 pls dont print this</td><td>3d9h52m</td><td>296.20g</td></tr></tbody></table></figure><h2> Potential Problems</h2><h3>First layer not sticking</h3>The biggest culprit for me is forgetting to wash the build plate from time to time. If you experience the first layer not sticking you could try to:<ol><li>Wash your build plate</li><li>Use a textured PEI plate</li><li>Use glue</li><li>Use the pyramid version with base layer</li><li>Slow down the first (few) layer(s)</li><li>dry your filament?</li><li>use different filament?</li><li>i&#39;m just guessing at this point</li></ol><h3>Nozzle too close to build plate / Extruder gear slipping</h3>For some reason this always happens to me when I use the 0.2mm nozzle, not sure if something is wrong with the nozzle, the printer, the slicer or with me.You&#39;ll know it&#39;s too close, if the extruder can&#39;t push any filament out and the extruder gear will therefore slip. The slipping will make clicking sounds, so please watch out for that when printing the first layer. Nevertheless, to combat this I change the Z-Offset in the slicer. Unfortunately there is no setting to change the offset, you&#39;ll have to change it in your printers start gcode. (Orca slicer has a setting btw) Somewhere at the bottom of the start gcode you should find<blockquote>;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing == ;curr_bed_type={curr_bed_type} {if curr_bed_type==&#34;Textured PEI Plate&#34;} G29.1 Z{-0.02} ; for Textured PEI Plate {endif}</blockquote> Remove the minus from `G29.1 Z{-0.02} ; for Textured PEI Plate` and choose `Textured PEI Plate` as your plate type Little tangent: In case you were wondering, choosing `Textured PEI Plate` over `Smooth PEI Plate / High Temp Plate` just changes the Z offset as far as I know. The comment in the first line of the gcode snippet explains it pretty well. Changing the offset from -0.02 to 0.02 essentially raises the nozzle by 0.04mm from where it usually would be. If the issue persists, just raise the offset by more.If more people are having this issue, let me know in the comments and I&#39;ll upload a version with adjusted Z offset.&nbsp;<h3>Filament stopped coming out of the nozzle</h3>Most likely heat creep. Happened to me when trying to print a level 7 pyramid with matte PLA. To combat this you might want to try printing cooler than normal. To fix this you could pause the print (if the stopping just happened) and unclog the nozzle with an acupuncture needle. If the heat creep happened a while ago you could cancel the print, set the print bed to the printing temperature and unclog your nozzle. Once that&#39;s done you can do some Gcode trickery to resume from the failed location. That is all theory though, I have no idea how to do this unfortunately&nbsp;<h3>It looks too cool</h3>Not sure how to help you with this.  <h3>Where is Level 7?</h3>While Level 7 fits on the 256mm build plate, sorry A1 mini :(, it takes 30minutes to render in OpenScad, way too long to slice in Bambu Studio and around 20gb of ram. I&#39;ll upload the 3mf for a level 7 in case you like suffering.   <h3>Where is Level 8?</h3>Ok don&#39;t get ridiculousbut just to do the math. Going from one level to the next basically multiplies the material by 6, so level 7 is ~300g which means level 8 is ~1.8kg. Time should also be factor 6, however in reality it seems a little less, so 3d10h print time at level 7 becomes ~20.5d at level 8. Since it&#39;s a little less than 6x, lets say ~20d give or take. You also need a print volume of 480mmx480mmx340mm, if you want to print it in one go, which would be one big chungus of a build plate if you ask me.&nbsp;<h2>Closing Thoughts</h2>If you print this, congratulations. You are now in possession of something special. I never get tired of staring at the fractal. But then again, I&#39;m pretty weird. There is something unique about holding a fractal in your hands. Also it&#39;s pretty weird to hold in your hands in general, since it weighs like nothing.Also I&#39;d love to see your prints with your amazing filament choices!

Sierpiński Pyramid (Customizable)

Display

Galactic Armory

3D print your own mini Master Chief! These files contain both a 1:12 and 1:48 scale mini Chief, a 3mf pre-supported file&nbsp;Find 9 other poses when you support me on Patreon during the months of Feburary and March 2024: https://patreon.com/galacticarmory

Halo 3 Master Chief Miniature

Halo

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381070/2024-01-09_7rk0rlmuanej.png"></figure><h4>Dimensions (LxWxH)</h4>185,2 x 12,25 x 29,4 mm (100% scale)<h4>Basic information</h4>Print in place articulated Moray eel. The body is divided into 12 movable articulated segments, which grant the model with lifelike movement, and a high range of flexibility.<h4>Files information</h4>You can choose from total of 2 files: .3mf and; .stl (for slicer compatibility issues)&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381070/2024-01-09_kqp11jcmm2lv.png"></figure><h4>Material</h4> PLA<h4>Layer height</h4> ≤0,2 mmor>0,2 mm + variable layer height<h4>Infill</h4>>10%<h4>Support</h4>None. The model was designed not to require any support material.<h4>Scaling</h4>Possible, however, If your machine isn't calibrated properly, has accuracy problems, or if you're dealing with filament issues, downscaling isn't recommended. When downscaling, proceed cautiously, and don't go too crazy, unless you want to risk mobility related issues. When printing a downscaled version, adjust layer height in proportion to the scale.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>Not necessary, contact area with the buildplate should be sufficient. If your print surface suffers from poor adhesion, consider using some adhesive spray, or other kind of adhesion booster. Using brim is possible, but not recommended, as it would be difficult, and inconvenient to remove afterwards.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381070/2024-01-09_zagts01p3gcb.png"></figure>In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released, in a response to your problem, or not. If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381070/2024-01-09_yk9jyvj09kv6.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381070/2024-01-09_m48c6x1l94pw.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.

Articulated Moray Eel

Print in Place

SH Designs

This 8-bit style Valentine heart makes a fun Valentine's day candy dish or fill with treats as a gift box for that Minecraft or retro 8-bit video game player. Inside features a removeable tray. Hide a secret love note beneath the insert for your valentine to discover!&nbsp;No AMS needed to print this multicolor model. The main lid piece, heart inlay and reflection inlay all print individually face down. Use a texture plate for a nice finished look. No glue needed, but if the pieces feel loose, you may add a bit to secure the inlays.

8-Bit Pixel Heart Valentine Box

Gifts

agepbiz

<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=jj3vnPYccS4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/jj3vnPYccS4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Simple and clean looking Xbox Controller Standfits 8x3mm anti slip rubber pads (optional)&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a> YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">https://twitter.com/agepbiz</a>&nbsp;Printsettings: No raft Support Structures for best results where the rubber pads are 0,1-0,2mm layer height

Minimalistic Xbox Controller Stand

WIZZY

Hallo! Hier ist eine Replica der AWP Sniper von Counter Strike. Die passgenauigkeit der Teile ist noch nicht ganz geben.Lässt sich aber alles mit ein bisschen Schleifen und Kleben gut umsetzen. Die Druckplatten sind Farblich angeordnet. Mann kann in 2 Farben Drucken oder man Lackiert das Ganze zum Schluss. Ich hoffe man kann sie nach den Fotos zusammen bauen, sonst werde ich noch eine Anleitung Hochladen.Optional kann man bei dem Visier noch 8 Stück M4x10 schrauben einbauen.  Schwarz Sunlu Pla + Grün Geeetech matt olive&nbsp;schaut gerne auch meine anderen modele an&nbsp;-Schalldämpfer hinzugefügt -Dreibein Adapter für besseren halt Hello! Here is a replica of the AWP Sniper from Counter Strike.  The accuracy of fit of the parts is not yet complete.But everything can be implemented easily with a little sanding and gluing. The printing plates are arranged in color. You can print in 2 colors or you can paint the whole thing at the end. I hope you can put them together according to the photos, otherwise I will upload instructions.Optionally, you can install 8 M4x10 screws on the Scope.&nbsp;check out my other models too Black Sunlu Pla+ Green Geeetech matt olive -Silencer add-New Tripod holder for better fit

AWP from CS:GO Counter Strike

Counter Strike

Sakul

Cozy Minecraft Lamp compatible with the BambuLab Led Lamp Kit. Bring this comfy lantern from your favorite block game to your home and use it as a desk lamp or even as a night light. No glue, screws, or additional parts needed, the complete lamp is assembled with 3D printed clips, making the build process straightforward and fun.No AMS needed. The Lamp Kit can be found <a target="_blank" href="https://us.store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">here</a>! The LED Kit works great with a standard smartphone brick or a power bank, making the lantern a portable option as well. How to build: The whole lantern is assembled using these 3D printed connector clips. You need 14 of those.<figure class="image image_resized" style="width: 31.27%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-01-28_5bf6ea8a01c34.jpg"></figure>Print all the parts and start clicking the upper part together. If you need to remove a clip again, it&#39;s best to use some pliers.<figure class="image image_resized" style="width: 85%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-01-28_ea97b21669c86.jpg"></figure>Next, connect the side blocks to the bottom part and add the LED light by simply pressing it in from the bottom. There are also some TPU feet you can add to the bottom part, but that is optional.<figure class="image image_resized" style="width: 84.44%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-01-28_f5cddf280a52a.jpg"></figure>Now slide the window parts in from the top. You can achieve many different looks by playing around with the choice of color here. For the original looks, normal yellow or blue filament works great.<figure class="image image_resized" style="width: 35.46%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-01-28_c310a536111c8.jpg"></figure>Lastly, put the top and bottom part together and enjoy!<figure class="image image_resized" style="width: 35.19%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-01-28_0c134d5dabc89.jpg"></figure>&nbsp;&nbsp;If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>   Check out my newest Uploads:&nbsp;<figure class="table" style="width: 96.81%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-06-04_0f30fee0f9ea4.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/457919#profileId-365927" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-05-08_184f6d673bf23.jpg"></a><figcaption>🐺🦊Minecraft Forest Animal Pack🐝🐇</figcaption></figure></td></tr></tbody></table></figure>

Cozy Minecraft Lantern for LED Lamp Kit 001

Minecraft

TheMumbl3r

I wanted a Juggernog machine for my collection, printed on the A1 MINI at 95% scale.used AMS to do the red printing for the lettering.  ON THE TOP WHITE PART WITH THE JUGGERNOG WRITING, I DID HAVE ONE STRING FROM THE BRIDGING NOT CONNECT. BUT THE REST DID.  ADDED SECOND PRINT PROFILE FOR THE FEW PEOPLE HAVING ISSUES WITH THE TREE SUPPORTS.   i added led fairy lights to the inside, which made it look lit up like in the game.see second photo. this model came from Thingiverse and is not my work. thank you Si_gowla for the files. Check his profile on thingiverse for more. <a target="_blank" href="https://www.thingiverse.com/si_gowla/designs" rel="nofollow noopener">https://www.thingiverse.com/si_gowla/designs</a>

JUGGERNOG PERK MACHINE CALL OF DUTY ZOMBIES

Call of Duty

Gatto

This Venice Rialto Bridge Comb Hair Clip is a beautiful and unique way to show your love for the city of Venice. The comb is a replica of the Rialto Bridge, one of the most famous bridges in the world. The bridge is adorned with intricate carvings and is a truly stunning sight to behold. The comb is perfect for everyday use and can be worn in any hair type. It is also a great gift for any occasion, such as a birthday, anniversary, or holiday. If you are looking for a unique and beautiful way to show your love for Venice, then the Venice Rialto Bridge Hair Comb is the perfect choice for you. Happy Prrrrinting!  <a target="_blank" href="https://makerworld.com/en/@Gatto" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000219791/design/2024-04-15_4fefedc8921d9.gif"></a><figure class="image"><a href="https://makerworld.com/en/@Gatto" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000219791/design/2024-06-16_32117daa8fb33.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/@Gatto" rel="nofollow noopener">Check out my profile for other models and follow MEOW!</a>

Venice - Rialto Bridge Comb Hair Clip

Salon

MFDesigns3D

Here is a trophy to go with the Settlers of Catan board game. The hexagon base is sized to fit in the 3D Catan frame.

Settlers of Catan Trophy

Catan

BrickSaberBuilder

This Life Sized Lego Revolver shoots real nerf bullets. Its a fun twist on a classic Lego toy. Its a great way to bring a boring blaster to life. Use it on friends, family, co-workers, or keep it on your desk as a simple ornament. Uses the NERF Elite 2.0 Ace SD-1 Blaster linked here: <a target="_blank" href="https://www.amazon.com/NERF-Blaster-Official-Stealth-Sized-Pull-Down/dp/B09H242KPM/ref=sr_1_57?crid=2EVYDDIVQ354K&keywords=nerf+elite+blaster&qid=1705511505&sprefix=nerf+elite+blaster%2Caps%2C84&sr=8-57" rel="nofollow noopener">https://www.amazon.com/NERF-Blaster-Official-Stealth-Sized-Pull-Down/dp/B09H242KPM/ref=sr_1_57?crid=2EVYDDIVQ354K&keywords=nerf+elite+blaster&qid=1705511505&sprefix=nerf+elite+blaster%2Caps%2C84&sr=8-57</a>&nbsp;<h3>Assembly Instructions:</h3><h4> You will need to purchase the blaster linked above to make it functional</h4><ol><li> You will need to strip away the blue outer shell and trim the bottom to make it fit in the blaster as seen below:</li></ol><figure class="image image_resized" style="width:30.83%;"><img src="https://makerworld.bblmw.com/makerworld/draft/435953/2024-01-17_2c64f0afdfa16.png"></figure> 3. Then simply insert it into one of the half sides of the blaster:<figure class="image image_resized" style="width:36.08%;"><img src="https://makerworld.bblmw.com/makerworld/draft/435953/2024-01-17_9f6aea8b91523.png"></figure> 4. Insert the 5 pins onto the barrel and the other half side of the blaster:<figure class="image image_resized" style="width:53.82%;"><img src="https://makerworld.bblmw.com/makerworld/draft/435953/2024-01-17_e374c16f78c94.png"></figure> 5. Press the 2 half sides together:<figure class="image image_resized" style="width:30.81%;"><img src="https://makerworld.bblmw.com/makerworld/draft/435953/2024-01-17_463351db3702d.png"></figure> 6. Press on the barrel making sure the 3rd hole lines up so Nerf bullet can travel through. Also make sure the notches on the barrel are in line with the notches on the handle:<figure class="image image_resized" style="width:58.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/435953/2024-01-17_8e371e99818e4.png"></figure>

Working Life Sized Lego Revolver (Shoots NERF Bullets)

Nerf

TomoDesigns

<h3>Introduction</h3>This planter features an awake cat, diligently guarding your plant. Resembling a chunky cat lounging on its back, it not only assists in caring for your plants but also appreciates being placed in a sunny spot, as the cat enjoys a warm place to nap. It adds a playful touch to your decor while ensuring your plants thrive in their cosy company.&nbsp;You do not need to use any support while printing this plant pot.&nbsp;Filament I used: <a target="_blank" href="https://amzn.to/3xpxam2" rel="nofollow noopener">PLA Basic Gray, White, Black, Pink</a>&nbsp;<h3>Socials</h3>Every make will be featured on my Instagram if you add your handle and follow me :) Check out <a target="_blank" href="https://www.instagram.com/tomo_designs/" rel="nofollow noopener">my Instagram</a> if you want to see more designs like this or if you have questions!&nbsp;Do you want to support me or become a reseller of my designs? Go take a look at my <a target="_blank" href="https://www.patreon.com/TomoDesigns" rel="nofollow noopener">Patreon!</a>&nbsp;<h3>Video</h3><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=x7J6FiHK8r4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/x7J6FiHK8r4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Chunky Cat Plant Pot

Pets

MinerJ

Barbie themed letter B croc charm, designed to be printed in flexible and durable TPU with 2 manual color changes (layers 71 & 75 if using 0.2mm layer height). Models in photos were all printed with Overture HS TPU in white and Overture regular TPU in pink. Recommend printing with standard supports as I've found they come off cleaner and easier with flat overhangs in TPU. Can also be printed in PETG though it's harder to find good opaque colors, PLA not recommended as it's too brittle and the post are likely to snap off.

Barbie Croc Charm Letter B

Crocs

Ethan Doerksen

I created this Thumper prop from images and clips I found online so it's not an exact replica but I believe it is pretty close. There is currently no functionality in this model but I am working on a motorized version that will hopefully be able to actuate just like they do in the movie.&nbsp;All parts were printed in PLA using 0.2mm layer height and 10% infill to cut down on printing time but you should be able to use whatever material and settings you like. Minimal supports are required for the holes in the top and bottom piece as well as the upper overhang on the pump. The model is designed to be glued together however, I designed the middle part to be held in by the pump without glue so it can be rotated like in the film.&nbsp;There are two versions of the spike: one where it is fully extended for placing the ground and another where the spike is retracted for carrying the thumper around. Only one version of the spike needs to be printed depending on what you need the prop for. The retracted spike is one part and the extended spike is two parts that need to be glued together like the rest of the model.

Dune Fremen Thumper

Dune

JASON MASK KEYCHAIN 

Friday the 13th

pumpkin20303

Eyes Up Guardian!!&nbsp;Behold, a meticulously crafted Ghost replica designed from scratch to emulate the Crucible/Competitive Ghost shell featured in Destiny and Destiny 2.&nbsp;I embarked on a quest to explore the possibility of powering LEDs using magnets, envisioning an object that could easily attach to a stand or mount while running the LEDs with minimal internal space constraints.&nbsp;Thus, I ingeniously housed the microcontroller and power via a USB cable in the base stand, utilizing magnets to align the wires when clipped onto it. Though not the most refined solution, it served as a fantastic proof of concept. While magnetic connectors were considered, they proved pricey and not quite fitting. Instead, I opted for 6 x 10mm x 1.6mm round magnets, positioning the wire underneath with the striped bare wire end on top. This setup ensures that when the Ghost and the base unite, the magnets securely hold the wires together. I contemplated soldering the wire to the magnets but decided against it to maintain magnetic strength.&nbsp;Moreover, leveraging WLED on an ESP8266 microcontroller grants the flexibility to have the logo on the stand display a different color or pattern from the Ghost's Eye.&nbsp;The Ghost shell comprises two halves joined with 3mm diameter, 2.6mm long cylinder magnets, totaling 16 magnets. For the connection between the Ghost and mount, I employed 10 of the 10mm diameter, 1.6mm tall cylinder magnets: one for each wired connection and two at the front.&nbsp;Assembly Instructions:&nbsp;1. Print your desired front and rear shell, front and rear eye, Eye diffuser, 4 x Wing Covers, 4 x Wing tips, Base Mount, Base, and Base Lid. If utilizing the Diffused Logo Base, print the Logo Diffuser as well. 2. Affix the Eye into the shell with a small dab of CA glue on the eye tabs, followed by attaching the Eye Diffuser into the front. 3. Insert the magnets into the front and rear shells, ensuring correct orientation. 4. If using LEDs in the rear shell, install them and thread the 3 wires from the LED strip out of the holes in the bottom. Arrange the wires from left to right as Ground, Signal, then 5V. Strip the wire ends, glue the 10mm magnets into the slot, and secure the wires with a touch of glue. 5. Add the Wing covers and Wing tips to the shell using a few dabs of CA glue if needed. 6. Attach the wires to the base mount using the same technique as the Ghost shell, maintaining correct orientation and wire order. For the diffuser, wire from the D1 Mini to the 3 LEDs in the base, then from the LEDs to the wire and magnets. 7. Install WLED onto your microcontroller and solder the USB cable to the 5V and Ground of the D1. Wire from the D1 Mini to the 3 LEDs, then to the magnet wires. 8. In WLED, set up a segment from LED 0 to 2 for the Base LEDs and from 3 to however many LEDs you are using in the eye (e.g., 32 LEDs). 9. Voila! You now have a Guardian's best friend as a luminous companion.Embark on your journey with this illuminated Ghost replica, and let it guide you through the darkness of the Destiny universe."

Destiny/Destiny 2 Crucible Ghost Shell with LED Eye, LED Base - Competitive Ghost Shell

Destiny

Chrobakx

I want to thank you all for the boost coupons you sent me. I really appreciate them.&nbsp;Fallout Vault-tec Industries light box based on my favourite game franchise.You can chose from two back plates with the hole for the hanging on the wall or without the hole.Stand is also included.I used cob LED trip with USB, 8mm wide.&nbsp;Be aware. I printed this without AMS, I modified G-code to be able change colours manually. If you have a AMS, please check the sliced file before printing.

Fallout Vault-Tec Industries light box

Fallout

PrintThatBoii

This is a scalable Christmas tree with shoes because everything is better with some shoes and a face XD. The first tree is at scale 75% the middle is at 100% and the right one is at 50%. You can go bigger if you want. note that the smaller you go the harder it is to get the shoes in. At the scale of 50% you have to push a bit harder than the one on 100%. 3D PRINTING:You can print this with a layer height of 0.2 (for the 50% tree and the shoes) or 0.3mm. You don’t need supports. I would recommend dropping the shoes 1mm lower in the slicer as the shoes are a bit too round in the front. I printed them with 15-20% infill (trees and shoes). If you read this in December, Happy Christmas! &nbsp;I borrowed the shoes from @FatherLicorice and his cute little ghosts. &nbsp;

Cute Christmas tree with shoes

Christmas

Markury

It's very cute (and easy to knock over, so be careful) Prints fine without supports, uses AMS for color changes, although it is possible to print without an AMS. You'll just get a white layer instead of solid black on the edges. Feel free to make your own profiles, mine is just the standard using Arachne for the wall generator.Happy printing

doodlebob pen holder

Spongebob

DjangoCashflow

Elevate your workspace with the "Stark Tower Pen Holder," a meticulously designed accessory that embodies the innovation of Tony Stark's iconic skyscraper. Perfect for fans of the Avengers and enthusiasts of distinctive design, this model combines functionality with the thrill of creation.  Features:<ul><li>Iconic Design: Modeled after the Stark Tower, this pen holder captures the essence of its modern, high-tech architecture in every line and angle.</li><li>Functional Art: More than just a model, it organizes your pens, pencils, and tools, turning your desk into a command center befitting a hero.</li><li>Space Efficiency: Though it commands attention, the holder is designed to fit neatly on any desk, conserving space while maximizing utility.</li><li>No Glue Required: The innovative pin system eliminates the need for adhesives, making the assembly process clean and straightforward.</li><li>Engaging DIY Experience: Assemble your own Stark Tower with ease, enjoying the satisfaction of bringing a piece of the Avengers' world to life.</li></ul>Own the Stark Tower Pen Holder and transform your desk into a landmark of productivity and inspiration. Assembly Guide: 1. Step: Insert the pins into one half of the tower. <img src="https://makerworld.bblmw.com/makerworld/draft/614484/2024-03-01_0d7952ffc9863.jpeg">2. Step: Push the other half of the tower onto the pins from the opposite side.3. Step: Attach the Avengers logo to the side of the tower, aligning it with the pins.

Marvel Avengers Stark Tower Pen Holder

Marvel

emmaginn

<h2>Monstera Planter with Hidden Drip Tray</h2>Here is the Monstera Planter with Hidden Drip Tray. The one in the photo is the 4 in. container size. I&#39;ve also included a print profile for 5 in containers. Hope you like it as much as I do!&nbsp;Printing - I was able to print it without support on the sides with no problem. You will still need supports on the bottom of the top part and on the bottom part to support the tabs.&nbsp;Commercial Licensing: <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreons</a> also have the opportunity to use commercial licenses for their own creative projects, adding versatility and potential income streams.&nbsp;If you like this, please be sure to check out my <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreon</a> where I upload many of my designs exclusively for members. Hope you like them!&nbsp;<figure class="image image_resized" style="width: 58.75%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000403878/design/2024-06-04_ca8fd50862ce2.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Alba Planter with Hidden Drip Tray</a>&nbsp;<figure class="image image_resized" style="width: 59.62%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000403878/design/2024-06-04_b0428e6109878.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Bamboo Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 57.27%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000403878/design/2024-05-06_43c269eba0e6.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Stacker Planter/Vase with Hidden Drip Tray</a>&nbsp;<figure class="image image_resized" style="width: 58.89%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000403878/design/2024-05-02_c4986346dbaf9.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Rivers Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 58.58%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000403878/design/2024-05-02_ac819f1c0e73c.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Slice Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 55.7%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000403878/design/2024-05-02_351443b9c636b.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Ripple Propagation Planter with Stand</a>

Monstera Planter with Hidden Drip Tray

Vase

Crafty Sven

Rupee

Zelda

SprocketStudios

Update January 25, 2024: A new version of this model has been released! It prints much cleaner at the bottom, and has the same threading. <a target="_blank" href="https://makerworld.com/en/models/156286" rel="nofollow noopener">Check it out here</a>. &nbsp;This is a large threaded egg. It was designed to be large enough to hold one of <a target="_blank" href="https://www.printables.com/model/525789-articulated-dragon" rel="nofollow noopener">McGybeer's articulated dragons</a> (printed at the default size). Looks particularly good in multicolor coextruded filaments.&nbsp;It will print OK without supports, but the bottom points of some of the scales get a bit messy.&nbsp;Update January 5, 2024: There is a new “revised” version which aims to address some of the issues with the messy early layers. It's not perfect by any means, but it has a wider base which is less prone to issues. There is also improved alignment of the lower scales.&nbsp;If you would like to print this model for commercial use you must purchase a license here: https://thangs.com/designer/Sprocket%20Studios

Large Threaded Dragon Egg

Game of Thrones

PLAUK

SIM Adapter Kit Card&nbsp;Simple, fast printing, kit card. Contains every SIM adapter you are likely to require.&nbsp;Kit card with the following adapters:<ul><li>Nano to Mini</li><li>Nano to Micro</li><li>Micro to Mini</li></ul>Carefully snap out the one you need and press fit your SIM.&nbsp;Prints quickly with no support.&nbsp;Profile supports the A1 Mini.

SIM Adapter Kit Card

Phone

ceo51378

I figured it was time to move to the dark side for a bit and came up with this design - in hindsight, it looks like something Sauron would be wielding if he was a Sith Lord.This is my third modular saber, following <a target="_blank" href="https://makerworld.com/en/models/460247" rel="nofollow noopener">The Guardian</a>. I will be adding additional parts to this saber in the near future including spacers, hilts, emitter and shroud designs. And yes, I am working on a D-Loop and/or Covertec fastener.The emitter pieces and hilt grip are compatible with my other ‘modular sabers’, however, the pommel and mid sections of this saber are thinner and will not be compatible with the grips on <a target="_blank" href="https://makerworld.com/en/models/460247" rel="nofollow noopener">The Guardian</a> or <a target="_blank" href="https://makerworld.com/en/models/460258" rel="nofollow noopener">The Master</a>.Print Settings:Layer Height: 0.15mm for main parts, 0.1mm for emitter and buttons.Walls: 3 for the hilt pieces, 2 for the spacersInfill: 20% for the shroud, mid section, and pommel. 15% for the rest.NO SUPPORTS - NO BRIMS - NO GLUE!! :DFilament:<ul><li>Sunlu Silk PLA - Black</li><li>Ziro Silk PLA - Black Silver</li><li>Ziro Silk PLA - Red</li><li>Sunlu Silk PLA - Silver</li><li>Overature Matte Black PLA</li></ul>Assembly Notes:Look at the pics attached on assembly. The pommel end cap has a 4mm hex hole for an allen key. Note that there are optional indexing holes in the the pommel and button bezel - these are sized to use filament as the alignment pegs.&nbsp;As always, I hope you all enjoy printing this as much as I enjoyed designing it!

CEO's Modular Sabers - The Fallen

Star Wars

Turbospeed

I divided this design into two cards, A & B, so it can also be printed on the A1 Mini. No AMS is needed since it is a single-color print. The overall size of the velociraptor is about 145mm tall once assembled. Each piece is about 1.3mm thick to give it a snug fit. Follow this cheat sheet below to help assemble the puzzle:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/637518/2024-03-04_e82c1c9ff16ab.png"></figure>Some tips:<ul><li>Make sure to check the feet, #35 & #38 slots should be pointing towards the inside or it won't be able to stand. Check the pictures for reference.</li><li>If you get stuck, try to assemble it in parts; head, legs, and neck separately.</li><li>Slow down your print to reduce stringing if your filament is not calibrated</li></ul>&nbsp;I will be adding a larger version as a secondary profile so make sure to follow.

Velociraptor Kit Card

Kit Cards

Pro3DTinkering

To support my projects and gain access to a Commercial License, please consider joining my <a target="_blank" href="https://www.patreon.com/Pro3DTinkering" rel="nofollow noopener">Patreon</a> community. Your support helps bring more creative designs and exclusive content to life!&nbsp;I&#39;m happy to introduce you Infinite Hexagon v2.0 | Triangles the redesigned version of my previous <a target="_blank" href="https://makerworld.com/en/models/69564#profileId-74882" rel="nofollow noopener">Infinite Hexagon</a> fidget. Thank you for your feedback which allowed me to make the model even better!&nbsp;Please check the assembly instructions on my <a target="_blank" href="https://www.youtube.com/watch?v=jaSH712f_fI" rel="nofollow noopener">YouTube channel</a> or in the video below:&nbsp;<figure class="media"><oembed url="https://www.youtube.com/watch?v=jaSH712f_fI"></oembed></figure> Feel free to comment and share your prints; it&#39;ll be nice to see them. I would appreciate any feedback!&nbsp;Thank you,Happy Tinkering!

Infinite Hexagon v2.0 | Triangles

Fidget

M. Owize

<h2>Support for Amazon Echo Dot Alexa</h2>Echo Dot 4Echo Dot 4 with clockEcho Dot 5Echo Dot 5 with clock&nbsp;Echo Dot Width: 100mmEcho Dot Height: 89mm&nbsp;I was missing a fun stand for my Echo Dot. I modified the 3D mascot Phil aka Phil a ment to the size of the echo dot.10-15% Infill Gyroid.Use brim on the body. I used a 20mm outer edge to make sure it didn't fall off. Enjoy!

Amazon Echo Dot Alexa Dock

Alexa

3D Senju

This is a L.E.G.O.-Like minifigure lightsaber lamp. It is made 10:1 scale except for the light diffuser which is made to fit within the 256mm print height.This lamp uses the same type of led strip like <a target="_blank" href="https://eu.store.bambulab.com/en-dk/products/ws2812b-rgb-led-strip-light" rel="nofollow noopener">Bambu Lab WS2812B RGB LED Strip Light</a> which is 60 LEDs/M. I have wrapped so the light rod is completely covered in the led strip. With this I have used 102 cm of the led strip.I have tested many variations of size, thickness, diameter and shapes to find one that isn’t too thick but still fades the light. The outer diffuser is made of 3 walls.&nbsp;[It can be recommended to use a higher heat resistant material like PET-G for the Light Rod and Diffuser. I have not had problems with bending but have had a user comment about a bed in his form the heat of his 12V LED strip. If you have PET-G for those parts that will be recommended]&nbsp;Assembly instructions:&nbsp;Step 1Pull the LED-strip through the hole in the light rod, making sure it is rotated the same way as shown in the pictures. Then wrap the LED-strip around the rod as closely as possible, while making sure the adhesive makes good contact. At the end cut the LED-strip where the cobber part is. Finnish off by wrapping a piece of clear tape around the end to help the adhesive not come off.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/523095/2024-02-10_24af65e78a7e1.png"></figure>&nbsp;Step 2Follow the video below by assembling it in the order shown.<figure class="image image_resized" style="width:86.42%;"><img src="https://lh7-us.googleusercontent.com/F8SzaGgSsmr9wRyvrNEC2MxCqsKYJIMkMUjDp11hQIKpV4kCMplV2R8bKpjMhLmrdelXepauUSviVXAbhjkoaMsbkWQR31UNkekoIC20arA8wtfcK85kKPFg-LUC_eNMx07WqffyWeFrWa_SopeMQI8"></figure>Cross section of the assembled lamp:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/523095/2024-02-07_3606fdb4db7e.png"></figure>For those not using my print profile I recommend printing the inner Light Rod lying down as shown in the picture below.<img src="https://lh7-us.googleusercontent.com/DMwQ_q1PUIvkrmzFHOCHGRd4CCXZMrilt_B-T7iJwPhPszTPRwax1zx4TT57Z3lnOb3MWdWfaftQDhFke-W63rM7vADBhtFaTx75kgLDQJh9odtu_SoJXRq3TKthwDthzxq4uNvZ4PVwhjQ1pu1h7oY">This will require more support and make the rod less “round”. But what this has done for me was make the rod stronger and print better. When printing it standing up I found that it wobbled somewhat because of the flexibility in my PLA and therefore made it not completely straight. If you have PET-G or a higher heat resistant material i would recommend to use it for this part and the defuser.&nbsp;If you find the light not to be defused enough I can recommend adding some foam packing material to the inside to defuse it more. I have not used it but it would help if you run into that problem.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/523095/2024-02-11_0d0fc1b3549c.png"></figure>Enjoy :)

Giant LEGOs-Like Lightsaber Lamp (10:1 scale)

Lego

Eluded Studios

Introducing the Halo Reflection Lamp. I designed this model with the idea of light shining against a backing and reflecting the light for a unique glow. I wanted to use simple shapes to offer a modern and minimalist look to the design. Designed to work with Bambu Lab LED Lamp Kit 001.&nbsp;If you would like to sell my models commercially, please consider joining the Patreon, I could use your support: <a target="_blank" href="https://patreon.com/EludedStudios?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink" rel="nofollow noopener">Patreon</a>&nbsp;If you wish to show your support for my work in way of donations, please buy me a coffee: <a target="_blank" href="https://www.buymeacoffee.com/eludedstudios" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;Material Links:<a target="_blank" href="https://store.bambulab.com/products/led-lamp-kit-001?skr=yes" rel="nofollow noopener">LED Lamp Kit</a><a target="_blank" href="https://us.store.bambulab.com/products/pla-basic-filament?variant=41078274654344" rel="nofollow noopener">PLA Basic Black</a><a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683" rel="nofollow noopener">PLA Basic Jade White</a>&nbsp;Assembly:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/767343/2024-02-18_2cb3f96f1e5438.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/767343/2024-02-18_f0bc90a988856.png"></figure>&nbsp;&nbsp;Recommended print settings:&nbsp;No supports necessary&nbsp;Only recommendation is to be aware of seam alignment on the back shade. I have it aligned to “back”, this way it prints on the top part of the shade. Do not put the seam on the cable cutout, this may add material that could cause difficulty in placing into the body.&nbsp;&nbsp;&nbsp;&nbsp;If you're interested, I also have a <a target="_blank" href="https://makerworld.com/en/models/191654#profileId-211611" rel="nofollow noopener">Poke Ball</a> version similar to this one<img src="https://makerworld.bblmw.com/makerworld/draft/767343/2024-02-18_e461bcd4cc92a.jpg">&nbsp;

Halo Reflection Lamp

Lamp

lukas.duus

Breaking Bad - Coaster. Fits perfectly in <a target="_blank" href="https://makerworld.com/en/models/157565#profileId-172930" rel="nofollow noopener">the coaster holder</a> that I also made. &nbsp;Measurements: <ul><li>Diameter: 90 mm</li><li>Thickness: 3 mm</li></ul>

Breaking Bad - Coaster

Breaking Bad

kriswillcode

This model of a Poké Ball is easy to print, feels solid, and makes a great cosplay prop. It's easy to assemble and is fun to toss around.When printing, I used a 0.16mm layer height, 15% infill (gyroid), and 2 walls. Supports are not required, but they may help make the front “hole” cleaner.<ul><li>Print the body and button frame in black. </li><li>Print two caps: one in red and one cap in white.</li><li>Print the button in silver.</li><li>Print three pegs in any color.</li></ul>To assemble, use the second photo as a guide. Use glue to hold the ball together. Remember that the pegs are only used for alignment: they're not structural.

Pokemon Poke Ball

Nintendo

bazwolff

This is an updated version of the "VW Bus Marker holder underfloor and wheels" where I made silver caps for the wheels and corrected the bottom part of the van so that it actually fits.For the caps I would suggest too use a raft or put your print plate in the freezer afterwardsI have added the original design as I can't find it online and credit it. So it is now complete to print<h3>Print Settings</h3>Rafts:NoSupports: NoResolution:0.15Infill: 10Filament: Generic PLA Black / silver&nbsp;&nbsp;Category: Organization

VW Van pen holder (full set) 

Holly

Filar3D

Just a Halloween Ghost fed up of trick or treating…&nbsp;Wanna sell my designs? Join my patreon: https://patreon.com/filar3D

Flipping FU Ghost Halloween 2023

Halloween

jakubhroch

Contains 2 versionsAMS ready for multicolor print STL version for classic layer color change&nbsp;Default size 100x3mm&nbsp;RecommendNozzle: 0.4 mmLayer height: 0.2 mm

LOTR Lord of the Rings - Tree of Gondor with font

Lord of the Rings

user_3356581437

陪伴我通关埃尔登发法环的装备，很爱它捏~曾经用光固化做过，效果也许会好一点？作为菜鸟，我也为社区出一份力！

Rust

Lan Party

sort

Runscape

Desk Items

VR

Batman

Statue

Apple

Stanley

Alien

Movies

Jurassic Park

Batman

Gamer

Easter

Display

Halo

Print in Place

Gifts

PC

Counter Strike

Minecraft

Call of Duty

Salon

Catan

Nerf

Pets

Crocs

Dune

Friday the 13th

Destiny

Fallout

Christmas

Spongebob

Marvel

Vase

Zelda

Game of Thrones

Phone

Star Wars

Kit Cards

Fidget

Alexa

Lego

Lamp

Breaking Bad

Nintendo

Holly

Halloween

Lord of the Rings

Elden ring

Kitchen

Meme

Printer Upgrade

Outdoor

Food

Car

Fun

Tools

Organization