Hackbert

xchgre

Created for my bathroom, using the scad model customization tool.

Shower hair trap - 78mm Diameter 15mm Depth 18.5mm border

bathroom

LorenzCR

Pokemon themed stencils, I hope your kids like them as much as mine did.If you want more stencils follow my profile or go to these links:&nbsp;Construckion Trucks <a target="_blank" href="https://makerworld.com/en/models/211048#profileId-230877" rel="nofollow noopener">https://makerworld.com/en/models/211048#profileId-230877</a>Letters and number <a target="_blank" href="https://makerworld.com/en/models/210784#profileId-230592" rel="nofollow noopener">https://makerworld.com/en/models/210784#profileId-230592</a>Animal <a target="_blank" href="https://makerworld.com/en/models/199936#profileId-220506" rel="nofollow noopener">https://makerworld.com/en/models/199936#profileId-220506</a>&nbsp;

Pokemon Stencil

stencil

gomezgames2b

Magnetic seal for glass door on 3d printer, Bambu P1S.&nbsp;Uses 4 ¾" x 1/8" (19-20 mm x 3.0mm) rare earth magnets and 2 5/16 (8-10 mm) magnets.I bought these from the local Hobby store. Measurements of the large magnets using Calipers are 2.7mm thick x 20mm diam :<figure class="table" style="width:83.01%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-02-07_afd968ca4a7d6.png" alt="upload image"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-02-10_247952bab40d2.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-02-10_fa88f9ad22fc.jpg"></figure></td></tr></tbody></table></figure>Magnets hold the seal to the printer door frame, and also act as a magnetic hinge.Print is slightly more than 32 grams and seems to stay in place pretty well.&nbsp;Tapered dovetail construction allows seal to be longer than the print bed, and reasonably uncomplicated print and assembly&nbsp;If you like, please ‘like’, follow and rate, or don't, no pressure. I thank you for your interest.I have several other 3D printer addons, including an AMS buffer guide, a filament chute, and a magnetic door seal for the P1S.You can check them out at Gomezgames2B upload page: <a target="_blank" href="https://makerworld.com/en/u/1906662470" rel="nofollow noopener">https://makerworld.com/en/u/1906662470</a> ,…if you are so inclined.&nbsp;To assemble the door seal:<ul><li>Dovetails are tapered, will only fit together in one direction, and will seat tightly.<ul><li>Seat the small top seal onto the larger bottom seal until fully seated with the seal completely flat. </li></ul></li></ul><figure class="table" style="width:77.65%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_41ce5cb75f7ab.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_cdaf87ada3733.jpg"></figure></td></tr></tbody></table></figure><ul><li>You will likely need to apply pressure to the back of the seal with the seal flat on a solid flat surface.</li></ul><figure class="table" style="width:80.82%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_79a6af91b9e1a.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_c86e7a37c7cde.jpg"></figure></td></tr></tbody></table></figure><ul><li>Slide the buckle from left to right across the seam between the top and bottom seals to lock the seal flat together   </li></ul><figure class="table" style="width:79.26%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_4dde9c0a74b67.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_6b81a552bf193.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_4b3b561f3459c.jpg"></figure></td></tr></tbody></table></figure><ul><li>The ¾"(20 mm) magnets should snap into place.</li></ul><figure class="table" style="width:82.33%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_1e80d47e69187.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_4141c1d87951d.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_6b5be17656bd2.jpg"></figure></td></tr></tbody></table></figure><ul><li>The 5/16"(10mm) magnets should stick easily to the hinge screws of the glass door.</li></ul><figure class="table" style="width:86.78%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_a0b9e6e77fdab.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_a1fcf384bfc7d.jpg"></figure></td></tr></tbody></table></figure><ul><li>The door should magnetically hold position when placed next to the magnets on the door hinges. If the magnets repel, the small magnets have the wrong side facing out, flip them over so their other flat surface is facing out and the magnets should attract.</li></ul><figure class="table" style="width:58.66%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_6b4bf0d1c3297.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/519140/2024-01-29_343a7260658d5.jpg"></figure></td></tr></tbody></table></figure>This is kind of a new idea, if you have issues please leave me a comment and I will do my best to address them as soon as I can.&nbsp;Thanks,

Bambu printer door seal/cover/gasket, covers open crack on left side of glass door

Printer P1S

钢铁前线

德国末日战车，拥有完美避弹外形，装备128mm强力坦克炮（猎虎同款）。原型出处：PS1游戏《panzerfront》的架空战车。原型设计：永夜护。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437433/design/2024-04-21_5107ac835d164.jpg"></figure>

E79重戦車 1比72

Print for Kids

Akio-42

I love the gridfinity system started by Zack Freedman and the design idea of easy accessibility and of displaying the stuff that is stored, rather than store it away. With my Gridfinity Ikea Samla adapter (<a href="https://bit.ly/GridfinitySamlaAdapter11l" rel="nofollow">https://bit.ly/GridfinitySamlaAdapter11l</a>) I added an easy way of transporting more than a few boxes which I felt was lacking.But when stacking several bins on top of each other it can be a bit tedious to access the lower bins in the Ikea Samla box. So I made a tray that can be placed on top of Gridfinity bins like normal bins and should be sturdy enough to lift it out easily. It is the same size as the baseplate on the bottom of the 11l Ikea Samla box (39x28x14 cm) with a 5x7 grid. And it only reduces the capacity of an 11l box by 1 3U high divider bin. So you can stack 4 3U high divider bins and the tray in an 11l Ikea Samla box. The handles are designed for optimal usage when stacking 2 3U high divider bins on the bottom and 2 3U high divider bins on the very top. Or you can just use it as a regular tray for moving your Gridfinity bins. You can then use any of the x*5 sized modular baseplates (<a href="https://bit.ly/GridfinityModularBaseplates" rel="nofollow">https://bit.ly/GridfinityModularBaseplates</a>) to attach the handles to (will not snap in to the top of other bins if you use it like that).New - Small and Big HandleThere is now a small and a big handle available. <ul><li>The small handle fits perfectly in the Samla 11l boxes.</li><li>The big handle is designed to be used with the Samla 22l boxes. The small handle can also be used with the Samla 22l box, but only on the top.</li></ul><h4>What do you need to print</h4><ul><li>You need to print 2x the Handle_Small.stl or Handle_Big.stl</li><li>If you have the possibility print 1x the TrayPlate_5x7.stl (requires at least a 300x250mm print bed). This will give you the best stability and best experience.</li><li>Or you can print 2x the TrayPlate_3x5.stl and 1x the TrayPlate_1x5.stl and attach them together with screws.</li></ul><h4>Assembly</h4><ul><li>Use 4 m3x12 button head cap screws (BHCS) and 4 m3 hex nuts to attach the two handles to the 5x7 tray plate (2 screws per handle are enough, but you can use more if you want)</li><li>If you decided for the two 3x5 and one 1x5 tray plates attach them together using 10 m3x8 screws (BHCS) and 10 m3 hex nuts first (same way as for the bottom grid for the Ikea Samla box - see here: <a href="https://bit.ly/GridfinitySamlaAdapter11l" rel="nofollow">https://bit.ly/GridfinitySamlaAdapter11l</a>)</li></ul><h4>Attribution</h4>I designed the handles of the tray myself.I marked the model as remix because the tray plate is based on my modular gridfinity baseplates (<a href="https://www.printables.com/model/360046-gridfinity-modular-baseplates" rel="nofollow">https://www.printables.com/model/360046-gridfinity-modular-baseplates</a>). The baseplates are now stackable. The original baseplates have a flat bottom and are desiged to be placed on flat surfaces. These baseplates cannot only be securely stacked upon another, but also be securely stacked on bins. It allows layered storage of gridfinity bins combined with easy accessibility. This is reached by the bottom of the baseplates being modeled after the Gridfinity system and based on the specification available at <a href="https://gridfinity.xyz/specification/" rel="nofollow">https://gridfinity.xyz/specification/</a> which is shared unter the licence <a href="https://creativecommons.org/licenses/by-nc-sa/4.0" rel="nofollow">https://creativecommons.org/licenses/by-nc-sa/4.0</a>

Gridfinity tray for Ikea Samla

Gridfinity

Officina23

This is the short version of my trusty clip to snap on the edge of the Bambu spool. Shape and measurements have been optimized to further improve attachment to the spool and the shortening allows you to further reduce printing times and the quantity of filament used.This clip will never come off accidentally and you can slide it along the edge to find the best position to hold the filament.&nbsp;You can use the clip with the AMS Lite without having to detach it, but if you are going to put the spool in the closed AMS you must first remove the clip. If you want a clip that doesn&#39;t have to be detached when using the closed AMS, consider downloading my “<a target="_blank" href="https://makerworld.com/it/models/59601#profileId-62387" rel="nofollow noopener">Bambu Spool filament Clip internal</a>” or the newest “<a target="_blank" href="https://makerworld.com/en/models/139661#profileId-152234" rel="nofollow noopener">Dual Slot Filament Clip</a>”.&nbsp;Please note: before downloading and printing third-party profiles, check that these have been first tested by the author and that they do not upload stolen images from those published by other users. Also check that the profile does not compromise strength, quality and printability just to save a couple of minutes of printing. This warning is not to discourage the contributions of many good designers, but to help exclude from Makerworld the many dishonest people who only upload rubbish!

Bambu Spool Filament Clip Evo Short

Printer A1

entroisdimensions_figurine

Arcanine is now available, and you have the choice between different file formats:<ul><li>STL</li><li>3mf for Multicolor Bambu Lab printer</li><li>3mf for Multicolor Prusa printer</li></ul>Video of printing the model: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> For printing, I used PolyTerra and Polylite PLA filament from Polymaker: 4 colors version:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=40603478655033" rel="nofollow noopener">PolyLite cream</a> (for belly and mane)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351937593" rel="nofollow noopener">PolyTerra PLA Sunrise orange</a> (for body)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352232505" rel="nofollow noopener">PolyTerra PLA Cotton White</a> (for the eyes)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233" rel="nofollow noopener">PolyTerra PLA Charcaol Black</a> (for pupil and line on the body)</li></ul>To discover which new models will be released next, follow @polymaker_figurines: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> Join the Figurines Community on <a target="_blank" href="https://discord.com/invite/r2ujMfEb7S" rel="nofollow noopener">Discord</a> Happy Printing!-----------------------------------------------Printer settings on the Bambu Lab X1C<ul><li>Rafts: No</li><li>Supports: Yes</li><li>Resolution: 0.2mm</li><li>Infill: 10%</li><li>Filament brand: Polymaker</li><li>Filament color: cream, orange, white and black</li><li>Filament material: <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla" rel="nofollow noopener">PolyTerra PLA</a></li></ul>

Arcanine Multicolor

Figurine

Dr.Mussy

<h3>Don&#39;t forget to &#34;Click A Like&#34; &amp; check out my other Cool designs and Follow my Weekly dose of KooKoo uploads, PLZ leave a comment what you want next!</h3>V2 is out all the issues fixed  https://www.thingiverse.com/thing:6669713  ACCESSORIES: <a target="_blank" href="https://makerworld.com/en/models/481073#profileId-392736" rel="nofollow noopener">https://makerworld.com/en/models/481073#profileId-392736</a>  -Mongolian Style Release <a target="_blank" href="https://makerworld.com/en/models/486891#profileId-399732" rel="nofollow noopener">https://makerworld.com/en/models/486891#profileId-399732</a> -XBow Sight by Durbanpoisonpew<a target="_blank" href="https://makerworld.com/en/models/490905" rel="nofollow noopener">https://makerworld.com/en/models/490905</a> - Broadhead Organizer (X-Bow Accessories)<a target="_blank" href="https://www.thingiverse.com/thing:2695878/files" rel="nofollow noopener">https://www.thingiverse.com/thing:2695878/files</a> -Fishing Accessories&nbsp;This was requested by one of my followers, its &#34;still in the works&#34; because i wanted a professional archer to give it a go and give me feedback on how well it works as I&#39;m no expert and I only shoot bows for fun.Its intended to an all in one survival tool so i will be adding a few more accessories in the future. I also tried to use bearings in the pulleys but they didn&#39;t affect shooting much so you can def get away with just solid pulley.Print Settings: 25% infill 8 walls on most parts except the pulley, Band Mounts &amp; WB which I used 12 to make sure it does not flex Supports only for the frame, NO Brim or Raft required, Long and easy print ;)BOM: Pully: M6 60mmL Furniture screw x2Optional Flanged Bearings x4 (F696zz)Grips: M3 12mm L x2 3mm 22mm L x2Rubber Holders: M5 30mm L x2Band Aligners: 3mm 14mm L x4 pinsP Rail: M3 20mm L x1Attachments/Accessories: M6 40mmL Furniture screw + Barrel nut (Some require more than one set)Fishing Reel: Winding Handle M6 60mmL Furniture screwSpool M6 60mmL hex screw + Lock Nut Bands cut 50mm from each end to give you the equivalent of a 30lb bow at 28&#34; draw length. If you cant find the exact ones you can use any tube band with 8mm OD and 4mm ID x 180mm L... <a target="_blank" href="https://bbguns4less.co.uk/products/trumark-slingshot-power-band-heavy-pull-rr-2.html" rel="nofollow noopener">https://bbguns4less.co.uk/products/trumark-slingshot-power-band-heavy-pull-rr-2.html</a>VIDEOS: <figure class="media"><oembed url="https://www.youtube.com/shorts/coq2-F3OdlM"></oembed></figure><figure class="media"><oembed url="https://www.youtube.com/shorts/lVDLl8R8F2E"></oembed></figure>If you are interested in other prop firearms, Airsoft parts and designs or need help with the build then do join our group on Matrix: <a target="_blank" href="https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/%23GCI-General:matrix.org" rel="nofollow noopener">https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/#GCI-General:matrix.org</a>!!!Note: I&#39;m always open for suggestion and help on improving the design and proof of concept.!Don&#39;t forget to hit the LIKE! &amp; check out my other Cool designs &amp; Follow my Weekly dose of KooKoo uploads ;)

Survival X-Bow

misc

AU3D

I&#39;ve been using these bottle holders for a while now and realized that separating the hooks from the main body is unnecessary. Printing the part with supports is not challenging, and it doesn&#39;t require the extra durability that horizontally printed hooks provide. Moreover, assembling them is quite cumbersome. Consequently, I&#39;ve integrated fixed hooks into all the bottle holders. These hooks are designed to fit snugly, ensuring maximum friction and preventing them from becoming loose.&nbsp;Below is a partial list of the available sizes, accompanied by examples, compiled by the creator of the model:<figure class="table" style="height: 330.786px; width: 714px"><table style="background-color: rgb(255, 255, 255)"><thead><tr><th style="background-color: rgba(0, 0, 0, 0.05); border: 1px solid rgb(191, 191, 191); padding: 0.4em">Bottle Diameter</th><th style="background-color: rgba(0, 0, 0, 0.05); border: 1px solid rgb(191, 191, 191); padding: 0.4em">SKADIS Holder Diameter</th><th style="background-color: rgba(0, 0, 0, 0.05); border: 1px solid rgb(191, 191, 191); padding: 0.4em">Example</th></tr></thead><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 40.00 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 40.50 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">Clipper Lighter gas</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 45.20 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 45.70 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">OIL 100ml</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 49.00 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 49.50 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">silicone/glue cartridge…</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 53.00 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 53.50 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">WD40, Grease spray 200ml/250ml</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 57.75 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 58.25 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">WD40 300ml…</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 66.20 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 66.50 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">Standard BEER/SODA CAN 330ml Standard Spray Paint 400ml…</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 80.00 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">D 80.50 mm</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">Isopropanol 1000 ml</td></tr></tbody></table></figure><h3>Lock Plug</h3>For a permanent installation I recommend using the <a target="_blank" href="https://makerworld.com/en/models/92747" rel="nofollow noopener">Lock Plug</a> I attached to prevent the holder from sliding out of the pegboard holes when you retrieve your bottle although this is optional as the three hooks provide a lot of friction. Depending on your print settings, filament and board, you might have to choose <a target="_blank" href="https://makerworld.com/en/models/92747" rel="nofollow noopener">another size</a>.<h3>Skadis Collection</h3>I am constantly developing more IKEA Skadis attachments. Check out my <a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">IKEA Skadis Collection here</a>.

Bottle Holders for IKEA Skadis

skadis

Ocular Dynamic

Some brackets to use when putting up a shelf. I put a pair on each profile and there are 3 different sizes. 4cm, 8cm and 12cm.

Shelf Holder Brackets

FckOBI

D4V3IG

<figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="background-color: hsl(0, 0%, 100%); border: 3px dashed hsl(0, 0%, 60%); text-align: center" colspan="2"><h3>Options for handle with original spool holder</h3></td></tr><tr><td style="background-color: hsl(0, 0%, 100%); border: 3px dashed hsl(0, 0%, 60%); padding: 30px"><figure class="image"><a href="https://makerworld.com/en/models/440329#profileId-359427" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000440329/design/2024-05-03_90d8774521a12.gif"></a></figure></td><td style="background-color: hsl(0, 0%, 100%); border: 3px dashed hsl(0, 0%, 60%); padding: 30px"><h4>Modular handle</h4>With the modular handle you can use different modules for the PTFE tube.&nbsp;Under Downloads you also have the option of downloading a RAW file from the module in order to build your own module.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/440329#profileId-359427" rel="nofollow noopener">Modular handle Print Profile 🡢</a></td></tr><tr><td style="background-color: hsl(0, 0%, 100%); border: 3px dashed hsl(0, 0%, 60%); padding: 30px"><figure class="image"><a href="https://makerworld.com/en/models/440329#profileId-345992" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000440329/design/2024-05-03_92c38088aede2.jpg"></a></figure></td><td style="background-color: hsl(0, 0%, 100%); border: 3px dashed hsl(0, 0%, 60%); padding: 30px"><h4>Standard handle with fixed PTFE holder</h4>The standard handle is the first version of the handle and has a fixed PTFE holder.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/440329#profileId-345992" rel="nofollow noopener">Standard handle Print Profile 🡢</a></td></tr></tbody></table></figure>&nbsp;<figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col></colgroup><tbody><tr><td style="border: 3px dashed hsl(0, 75%, 60%); padding: 30px">*To attach the module, use one of the securing screws that you removed when setting up the A1 mini.&nbsp;Please note that the modular handle has been optimized and the print profiles from third parties, which do not originate from me and cannot be changed by me, are definitely not up to date.</td></tr></tbody></table></figure>&nbsp;<figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col></colgroup><tbody><tr><td style="border: 3px dashed hsl(0, 0%, 90%); text-align: center"><h3>The idea of the spool holder handle</h3></td></tr><tr><td style="border: 3px dashed hsl(0, 0%, 90%); padding: 30px">I really liked the idea of the <a target="_blank" href="https://makerworld.com/en/models/391108#profileId-292133" rel="nofollow noopener">spool holder from Vsin</a> because the original spool holder is used and you save space at the back. But the design was very practical and designed to save filament. But its basic design fits perfectly to combine it with a top handle.</td></tr></tbody></table></figure>&nbsp;<figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="border: 3px dashed hsl(0, 0%, 60%); text-align: center" colspan="2"><h3>Works well together</h3></td></tr><tr><td style="border: 3px dashed hsl(0, 0%, 60%); padding: 30px"><a target="_blank" href="https://makerworld.com/en/models/433767" rel="nofollow noopener">Flexible cable clip with 360 degree rotation</a>&nbsp;Flex cable clip holder with 360 degree rotation - perfect for 3D printers and e.g. Bicycle bowden cables or for movable cable management.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/433767" rel="nofollow noopener">Go to Flex cable clip 360 🡢</a></td><td style="border: 3px dashed hsl(0, 0%, 60%); padding: 30px"><figure class="image image_resized" style="width: 100%"><a href="https://makerworld.com/en/models/433767#profileId-338548" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000440329/design/2024-05-04_2240ea77d7868.gif"></a></figure></td></tr><tr><td style="border: 3px dashed hsl(0, 0%, 60%); padding: 30px"><a target="_blank" href="https://makerworld.com/en/models/452978" rel="nofollow noopener">A1 Mini cover for PTFE Tube Connector holder</a>&nbsp;If you use the PTFE Tube Connector of the A1 Mini in a different location and want to cover the connection.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/452978" rel="nofollow noopener">Go to PTFE Tube Connector holder cover 🡢</a></td><td style="border: 3px dashed hsl(0, 0%, 60%); padding: 30px"><figure class="image"><a href="https://makerworld.com/en/models/452978#profileId-360264" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000440329/design/2024-05-04_242c97f9be20e.gif"></a></figure></td></tr></tbody></table></figure>&nbsp;<figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col></colgroup><tbody><tr><td style="border: 3px dashed hsl(0, 0%, 90%); text-align: center"><h3>Changelog</h3></td></tr><tr><td style="padding: 30px">25.06.2024Version 2 of the modular handle is now available - no fundamental design changes have been made - the following have been changed:<ul><li>The handle has been adjusted so that there are almost no overhangs in order to improve the print result.</li><li>The module holder has been adjusted for greater stability - Old modules fit on the new handle - but the new modules no longer fit on the old version.</li><li>The modules for the new handle have also been adjusted as a print profile.</li></ul></td></tr><tr><td style="border: 3px dashed hsl(0, 0%, 90%); padding: 30px">18.05.2024New version of the “Module with A1 mini PTFE holder” without support structure. Faster printing and the fit of the PTFE holder has been improved.</td></tr><tr><td style="border: 3px dashed hsl(0, 0%, 90%); padding: 30px">03.05.2024Added handle as a modular version to install modules for the PDFE holder.</td></tr></tbody></table></figure>&nbsp;<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000440329/design/2024-05-18_ec7f29f3b0be4.png"></figure>&nbsp;

A1 Mini handle with original spool holder

Printer A1 Mini

Panky1978

Mascara Ghost Warzone Call of Duty

Mask Ghost warzone

Iconic FAB

<h2>ABOUT STEALTH PRESS</h2>Stealth Press is a highly precise, mostly printed DIY heat set insert tool for generic, TS100/101, and Pinecil soldering irons. There are multiple projects like this available for free download and build. Most of them rely on Misumi standard 2020 or 4020 extrusions to provide precision which adds extra cost, time, and complexity to the build.&nbsp;Stealth Press build relies on precision provided by 300mm MGN12H linear rail instead which provides a stable spine to build every other component around it.&nbsp;Integrated, printable build plate adds another critical element for precision and easiness to work with.&nbsp;Stealth press uses KEY-BAK key reel with kevlar belt loop to ensure longevity (proven to last more than 1 million pulls) and has some other quirks, features, and QoL improvements compared to similar projects.  <h2>WHERE TO GET MECHANICAL PARTS OF THE BUILD?</h2><h3>Option 1 — Order ready-to-build kits (supported vendors)</h3><ul><li><a target="_blank" href="https://dfh.fm/collections/stealth-press?ref=iconic-fab" rel="nofollow noopener">Stealth Press KIT</a> — DFH.fm</li><li><a target="_blank" href="https://kb-3d.com/store/tools-equipment/1002-pre-order-iconic-fab-stealth-press-kit-for-heat-set-inserts-1698787283366.html?affp=14933" rel="nofollow noopener">Stealth Press KIT (US)</a> — KBD3D.com</li><li><a target="_blank" href="https://lecktor.com/en/stealthpress/1565-stealthpress-hardware-kit.html" rel="nofollow noopener">Stealth Press KIT (EU)</a> — Lecktor.com</li></ul>Stealth Press is now available as a comprehensive mechanical parts KIT, streamlining the process of sourcing the necessary components. In many cases, purchasing the KIT proves to be a quicker and more convenient option than sourcing the parts individually. Availability and selection may vary depending on your location and existing inventory. Each listed KIT source offers a unique selection of parts, all adhering strictly to the BOM and carefully chosen to guarantee the highest quality build.&nbsp;<h3>Option 2 — Self-source using BOM (bill of materials)</h3><figure class="table" style="width:100%;"><table><thead><tr><th>Mechanical parts</th><th style="width:50px;">QTY</th></tr></thead><tbody><tr><td>M3x8 SHCS — Bolts (Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DD5xFM1" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">40</td></tr><tr><td>M5x25 SCHS — Bolts (Sources: <a target="_blank" href="https://s.click.aliexpress.com/e/_Dne9xOV" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">2</td></tr><tr><td>F695-2RS — Bearings (F = Flanged) (Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DBulKpf" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">4</td></tr><tr><td>M3 — Threaded Inserts — M3x5x4 (M3 x (OD)5 x (L)4 —VORON) (Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DnK00Kp" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">30</td></tr><tr><td>MGN12H — Linear Rail — 300mm — Black (Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_Dd5YJTr" rel="nofollow noopener">INT</a>) or SS (Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DeKhmdr" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">1</td></tr><tr><td>KEY-BAK — Super48 36&#34; 13oz (Source: <a target="_blank" href="https://www.amazon.com/KEY-BAK-Retractable-Keychain-Polycarbonate-Oversized/dp/B0088MQA10/ref=sr_1_1?crid=11NSAAWHG3GP6&amp;keywords=key-bak%2Bsuper48%2B36%22%2B13oz&amp;qid=1704371600&amp;sprefix=KEY-BAK%2B%E2%80%94%2BSuper48%2B36%22%2B13oz%2Caps%2C409&amp;sr=8-1&amp;th=1" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">1</td></tr></tbody></table></figure><figure class="table" style="width:100%;"><table><thead><tr><th colspan="2">Printed Parts</th></tr><tr><th colspan="2">The most current revision is R1.1 - check the change log below!</th></tr></thead><tbody><tr><td>Printed parts</td><td style="width:50px;">16</td></tr></tbody></table></figure><figure class="table" style="width:100%;"><table><thead><tr><th colspan="2">Soldering iron-related parts</th></tr><tr><th colspan="2">Heat-set insert tips vary for the type of soldering iron used!</th></tr></thead><tbody><tr><td>Soldering iron (<a target="_blank" href="https://s.click.aliexpress.com/e/_DdkRD1j" rel="nofollow noopener">Generic</a>, <a target="_blank" href="https://s.click.aliexpress.com/e/_DBwFzCh" rel="nofollow noopener">TS100/101</a> or <a target="_blank" href="https://s.click.aliexpress.com/e/_DdcI3Lr" rel="nofollow noopener">Pinecil</a>)</td><td style="width:50px;">1</td></tr><tr><td>Soldering Adapter for heat-set inserts (Source: <a target="_blank" href="https://cnckitchen.store/collections/soldering-tips-and-sets" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">1</td></tr></tbody></table></figure><h2>ASSEMBLY MANUAL</h2><a target="_blank" href="https://files.printables.com/media/prints/609644/other_files/4843265_e59cfc31-fcd8-4017-8f65-f14361245270_7bd9886b-26d0-468e-92d9-ef99138e9d90/stealth_press_assembly_manual_rev10-20231010_iconic-fabcom.pdf" rel="nofollow noopener">Download the full assembly manual with visuals and a step-by-step guide</a>.<h2>VIDEO BUILD GUIDES</h2><h4>Iconic FAB video build guide</h4><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=TIkG8giLG9g"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/TIkG8giLG9g" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h4>Live build by Nero3D the Canuck Creator</h4><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=G3Zb9F8HbCo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/G3Zb9F8HbCo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Live build by ModBotArmy<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=mqJDLKIEuqs"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/mqJDLKIEuqs" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h2>SUPPORTED SOLDERING IRONS</h2><a target="_blank" href="https://s.click.aliexpress.com/e/_DdzrJd3" rel="nofollow noopener">Generic</a>, <a target="_blank" href="https://s.click.aliexpress.com/e/_DBwFzCh" rel="nofollow noopener">TS100/101</a> or <a target="_blank" href="https://s.click.aliexpress.com/e/_DdcI3Lr" rel="nofollow noopener">Pinecil</a>.&nbsp;<h2>PRINT GUIDELINES</h2>Here are print guidelines for you to follow and have decent success with printing parts:<figure class="table" style="width:100%;"><table><tbody><tr><td>3D PRINTING PROCESS</td><td>FDM (fused deposition modeling)</td></tr><tr><td>INFILL TYPE</td><td>Grid, Gyroid, Honeycomb, Triangle or Cubic</td></tr><tr><td>MATERIAL</td><td>ASA, ASA-CF, ABS, ABS+, ABS-CF</td></tr><tr><td>INFILL PERCENTAGE</td><td>40% - 60%</td></tr><tr><td>LAYER HEIGHT</td><td>Recommended: 0.2mm</td></tr><tr><td>WALL COUNT</td><td>Recommended: 4</td></tr><tr><td>SOLID TOP/BOTTOM LAYERS</td><td>Recommended: 5</td></tr><tr><td>EXTRUSION WIDTH</td><td>Forced 0.4mm</td></tr></tbody></table></figure><h4>Side notes to the print guidelines:</h4>You can succeed with Support cubic infill type (slicer support may vary) and as little as 25% infill for all parts if are aiming for faster print speeds and less filament usage. PLA, PLA+, and PETG are also considerable filament choices. However, take into account that soldering iron radiates some indirect heat. The usage of less temperature-stable filaments may result in part deformations over time.It is recommended to use ASA or ABS at least for “arm” and “iron mount” parts. A wall count of 4 is an absolute must to ensure the structural integrity of the parts. There is no need to go over the top with this. 4 are for this particular build.<h4>File naming for printed parts:</h4>The parts use this naming convention:<ul><li>PRIMARY COLOR — These files will have nothing at the start of the filename. Example: buildplate_x1.stl</li><li>ACCENT COLOR — Files have “[a]” to the front of any STL file that is intended to be printed with accent color. Example: [a]_bushing_x1.stl</li><li>COUNT OF PARTS — Files have “x1” to “x4” at the end of any STL file. The number represents the count of identical parts to be printed. Example: [a]_m5_1mm_spacer_x4 (In this case you will need to print 4 identical spacers).</li></ul>&nbsp;<figure class="table" style="width:100%;"><table style="background-color:#f9cd4218;border-color:#f9cd42;border-style:solid;"><tbody><tr><td><h3>CREDITS AND ACKNOWLEDGEMENTS</h3></td></tr></tbody></table></figure>Special thanks to Stefan and Alexander from <a target="_blank" href="https://www.cnckitchen.com/" rel="nofollow noopener">CNCKitchen</a> for backing this project by providing a generous set of soldering-iron tips and heat-set inserts for building and testing purposes.Here is the list of other open-source projects used for sourcing multiple CAD parts. Models are used as-is or modified to fit the project purpose and design:<ul><li>VORON TAP: <a target="_blank" href="https://github.com/VoronDesign/Voron-Tap" rel="nofollow noopener">https://github.com/VoronDesign/Voron-Tap</a> [CAD models for heat-set inserts and bolts]</li><li>VORON Switchwire: <a target="_blank" href="https://github.com/VoronDesign/Voron-Switchwire" rel="nofollow noopener">https://github.com/VoronDesign/Voron-Switchwire</a> [Base for remix of KEY-BAK mounting parts]</li><li>Ender SW: <a target="_blank" href="https://github.com/boubounokefalos/Ender_SW" rel="nofollow noopener">https://github.com/boubounokefalos/Ender_SW</a> [Base for remix of Support arms]</li></ul><figure class="table" style="width:100%;"><table style="background-color:#F5F5F5;border-color:#808080;border-style:solid;"><tbody><tr><td><h3>CHANGELOG</h3></td></tr></tbody></table></figure><figure class="table" style="width:100%;"><table><tbody><tr><td style="width:100px;">Date</td><td>Change</td></tr><tr><td>14.11.2023</td><td>STLs for variations of generic soldering iron mounts were added supporting 18mm and 19mm (OD) irons.</td></tr><tr><td>12.11.2023</td><td>Minor update preparing for Dremel Add-On release. leg_x1_r1.1.stl is updated to leg_x1_r1.1_1.stl removing safety buffers. This was necessary to ensure cross-compatibility in between base parts and multiple add-ons in development.</td></tr><tr><td style="width:100px;">04.11.2023</td><td>Printed files updated to R1.1. with cosmetic changes to ALL parts. (Note that mechanical parts - BOM is not affected, zero changes there.) What&#39;s new: — All heat-set insert hole sizes are now reworked to 4.7mm solving the issue of being too tight and pushing out excessive plastic. Holes now have 0.4mm fillets on both the entry and the end.— Wire strain reliefs now have an extra opening for the M3 bolts solving an issue that the bolts were too hard to fit in.— The LEG plate now has specific safety buffers preventing linear rail bearing carriage accidental slide-offs (Sometimes referred to as dropping balls :) Do not do that.)— Ton of other incremental improvements optimizing general printability of parts even better than it was in Rev.1.0</td></tr><tr><td style="width:100px;">10.10.2023</td><td>.STEP files added for soldering iron mounts only (for all 3 currently supported types - Pinecil, TS100 / 101, and “Generic”.</td></tr><tr><td>26.10.2023</td><td>Minor changes in BOM - Key-bak Super48 36&#34; 13oz variant as recommended.</td></tr><tr><td style="width:100px;">11.10.2023</td><td>Initial version (Rev1)</td></tr></tbody></table></figure>

Stealth Press (Heat Set Insert Press)

Tools

cwfflutter

Enjoy the model if you love Zelda

Zelda - Sheikah Slate 

cosplay

ragnadreamclaw

This is a legend of Zelda wall decor model by @Runningutes on printables. I went through and custom painted the model in Bambu and I wanted to share that as it was a pain to accomplish. Currently using this as a lovely wall decor item in my video game.

Zelda Wall Art

decoration

cyanidesugar

This unique print-in-place Jack Skellington piece utilises a hybrid printing method that combines Hueforge filament painting and a traditional 3D print model. Jack's head sticks out of the print, giving it a little bit of a personality! &nbsp;Important for this print: Black is repeated just before the head is printed. If you only have one AMS, I suggest leaving black in Slot 1 and removing AMS slot 2 once its finished printing to replace it with the colour for the head (if using something other than white). If you are using white, you do not need to remove and replace anything! Just assign the white to the slot your white filament is in. &nbsp;Note: You do NOT need an AMS, or an MMU for this print. It definitely helps, but you can manually pause your printing and swap filament spools if you do not have an AMS.&nbsp;AMS tip: If you only have one AMS, and have more than 4 colours in a print, once the first colour finishes printing, remove that spool while the second colour is printing, and replace it with the 5th colour. In your slicer, when assigning your colours to AMS slots, make sure you select your 5th colour to match the slot you will be replacing it in. &nbsp;The included 3MF has all the settings already applied if you are using the profile attached, but if you are downloading the raw files and using your own print profile, please follow the instructions below.&nbsp;Print Instructions<ol><li>The print swaps filaments 5 times, with the final time being the colour of Jack's head that ‘pops out’ from the print. In my print, I used a 5th colour (Glow in the Dark), but you can use what ever colour you want, or even reuse the white. </li><li>I printed with supports for the head, but depending on your printer, you may get away with not having supports. I have altered the head to be printed with 5% infill.</li><li>I printed this file with adaptive layer heights for the head to speed things up (0.2 for the base of the head and 0.04 towards the top of the head). This should be reflected in the 3MF file. You can certainly do this, or use your own settings as well.</li><li>Post processing includes removing supports for the head, through the holes for the eyes. The tree supports that I used with my settings were fairly easy to remove, however if you are worried, please feel free to use your own support settings to ensure ease of clean-up and removal! </li></ol>Filament Swaps&nbsp;Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm&nbsp;Filaments Used:&nbsp;- PLA Kingroon Black Transmission Distance: 0.4 - PLA+ Sunlu Red Transmission Distance: 6 - PLA META Sunlu Teal Transmission Distance: 5.4 - PLA Kingroon White Transmission Distance: 8- PLA Overture Glow in the Dark Transmission Distance: 8 (this is your head colour!)&nbsp;Swap Instructions: - Start with Black - At 1.04mm swap to Red - At 1.2mm swap to Teal - At 1.36mm swap to White - At 2.08mm swap to Black (this is a repeat colour!) - At 2.92 swap to Glow in the Dark for the rest. (Head Colour)&nbsp;This print uses a model of <a target="_blank" href="https://www.thingiverse.com/thing:1787394" rel="nofollow noopener">Jack's head</a> created by Thingiverse user <a target="_blank" href="https://www.thingiverse.com/vmatthews/designs" rel="nofollow noopener">vmatthews</a>. &nbsp;

Jack Skellington Pop Out Print - Print in Place Hueforge Hybrid

glow

Jordan Travers

Zelda Coaster

Kitchen

Ever wondered what a Darth Vader force ghost would look like over Christmas? Well wonder no longer!&nbsp;Here's a fun HueForge print of your favourite Father Christmas (get it?) that prints relatively quick, only taking about 2 hours for the entire print. It measures 150mm x 150mm and fits in <a target="_blank" href="https://makerworld.com/en/u/1900444938" rel="nofollow noopener">TheCraftyMaker's</a> HueForge <a target="_blank" href="https://makerworld.com/en/models/90485#profileId-96891" rel="nofollow noopener">frame</a> as well! Just print the 150mm x 150mm version :)&nbsp;Print Instructions:Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm&nbsp;Note: I used Glow in the Dark filament for this one to add a little fun to the print. If you do not want the print to be GitD, replace the GiTD with just plain white :)&nbsp;Filaments Used:<ul><li>PLA Kingroon Black Transmission Distance: 0.4</li><li>PLA Glow in the Dark Green Transmission Distance: 5.2 (or White!)</li><li>PLA CC3D Blue Gray Transmission Distance: 3</li><li>PLA META Sunlu Teal Transmission Distance: 5.4 -PLA Kingroon White Transmission Distance: 8</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At 0.76mm swap to Glow in the Dark Green (or white)</li><li>At 0.8mm swap to Blue Gray</li><li>At 0.96mm swap to Teal</li><li>At 1.16mm swap to White (Do not swap after this if you do not want the glow!)</li><li>At 1.60mm swap to Glow in the Dark Green (or white)</li></ul> ______________________________________________If you'd like to support me, I now have a <a target="_blank" href="https://patreon.com/cyanidesugar3dp" rel="nofollow noopener">Patreon</a>! Joining will give you behind the scenes information on WIPs, access to a private discord, early access AND exclusive models! If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!______________________________________________

Ghost of Christmas Darth - HueForge Print (Frame Compatible)

Hueforge

vajcnerd

Minecraft Enderman Articulated

Toys

Spike_Mix

Dimensions:<ul><li>5 cm diameter</li><li>4 mm height</li><li>0.5 mm per level (8 levels)</li></ul>Print settings:<ul><li>Layer height: 0.1mm</li><li>Infill: 15%</li><li>For non multimaterial printers you&#39;ll need to pause the print every 5 layers (1 level if you keep the layer height at 0.1mm) and swap the filament</li><li>For multimaterial printers the 3mf file I uploaded has the color changes already set</li></ul>I used 3 colors, starting with a dark wine color, then white, and then a light pink.  -------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;To legally sell PRINTED models, you may obtain my permission through this link: <a target="_blank" href="https://www.patreon.com/SpikeMix3D" rel="nofollow noopener">https://www.patreon.com/SpikeMix3D</a>

Floral multi color mandala earing

Tanja Prints

BamBam Design

<h4>The Sunflower Windmill - Self adjusting Sunflower wind turbine</h4><figure class="media"><div data-oembed-url="https://youtube.com/shorts/Nb2DXeNK04M?si=IG2UF_6DRZEUfwdW"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=Nb2DXeNK04M"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/Nb2DXeNK04M" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Need a bit more wind, but can turn fast as well. Great spring &amp; summer garden decoration<ul><li>Beautiful Windmill with a Sunflower Propeller Design</li><li>Self adjusting to wind direction through the Tail Blade</li><li>100% printed, no Screws or tools needed</li><li>You can add 2 Propellers on one Axle with 2 distances</li><li>Choose your propeller sizes and directions (You get nice effects if you choose different directions)</li><li>Rods are stack able to your needed height</li></ul><h4>Printing:</h4>The rod could be a bit difficult to print, i added custom support, but clean your buildplate and apply some glue.&nbsp;Profile is tested with PETG &amp; PLA 👍🏼 Prefer PETG for Axle and Rod&nbsp;Info:This time the Axle is a bit shorter to add only 2 propeller with 10mm and 2 distances with 5mm each.And i slightly redesigned the tail blade to match the sunflower design. My other windmills are still fully compatible if you want to mix it up:<ul><li><a target="_blank" href="https://makerworld.com/models/235261" rel="nofollow noopener">Toroidal Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/388124" rel="nofollow noopener">Elliptical Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/425419" rel="nofollow noopener">Sunflower Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener">CLAMP for Windmills</a></li></ul><h4>Assembly:</h4><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-04-12_5daa8d4f64298.png"> Thanks to all followers and don&#39;t forget the virtual handshake 👍 ….Happy Printing&nbsp;Some other Windmill Designs:<a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon</a><figure class="image"><a href="https://makerworld.com/en/models/454861" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_9785fb508d759.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb</a><figure class="image"><a href="https://makerworld.com/en/models/250216" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_9a2a48a0331ed.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/235261" rel="nofollow noopener">Toroidal</a><figure class="image"><a href="https://makerworld.com/en/models/235261" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_ca5dfbc30c041.jpg"></a></figure>&nbsp;Checkout this Clamp for windmill, as well🧐 <a target="_blank" href="https://makerworld.com/models/255324" rel="nofollow noopener">https://makerworld.com/models/255324</a><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-03-15_6d9c46a2c3e8c.jpg"></a>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Sunflower Windmill - Customizable System

Garden

2D Art

More exclusive Designs and Commercial Licenses: <a target="_blank" href="https://www.patreon.com/2darts" rel="nofollow noopener">https://www.patreon.com/2darts</a>&nbsp;Stackable Beer Crates / Battery Holder for<ul><li>AA Batteries</li><li>AAA Batteries</li><li>9V Batteries</li><li>CR2025 Batteries</li><li>CR2032 Batteries</li><li>Empty Box (Customizable with Names)</li></ul>I would really appreciate it if you could rate my Designs! :)&nbsp;Follow for Professional and Free Designs!

Stackable Beer Crates AA  AAA  9V  CR2025  CR2032

Organization

AERO3D

Looking for a unique and challenging 3D printing project? Check out this fully functional Wall-E robot model! With movable eyes, neck, arms, and tracks, this design is the perfect challenge for anyone interested in robotics and programming. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/705574/2024-03-15_963ce4ec8bbbd.gif"></figure>&nbsp;Designed by my girlfriend, this project is not only an amazing replica of the beloved Pixar character, but also a great way to improve your 3D printing and painting skills. Plus, with only 5% of the design not created by her, this is a truly original project. Whether you're a student or hobbyist, this project is sure to impress and inspire. Get the files today and start building your very own Wall-E!

FUNCTIONAL WALL-E 3D MODEL

Complex Projects

Litolunar

20% fill Without supports. &nbsp;And 100% fill in the logos.&nbsp;Tools needed:<ul><li>Welder</li><li>Tin</li><li>Screwdriver</li><li>Pliers</li><li>Lighter</li></ul><figure class="image image_resized" style="width:50.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_6adf9eb4af93f.jpg"></figure>&nbsp;Materials:<ul><li><a target="_blank" href="https://es.aliexpress.com/item/1005001411945792.html?spm=a2g0o.order_list.order_list_main.372.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">High intensity LED</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/32807032859.html?spm=a2g0o.order_list.order_list_main.380.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">Battery</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/32806159516.html?spm=a2g0o.order_list.order_list_main.467.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">Battery holder</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/1005005341202402.html?spm=a2g0o.order_list.order_list_main.386.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">Usb c board</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/1005006132144823.html?spm=a2g0o.productlist.main.7.595ft8PKt8PKfZ&algo_pvid=9937444f-0632-4cc7-a0e9-251359c48c22&algo_exp_id=9937444f-0632-4cc7-a0e9-251359c48c22-3&pdp_npi=4%40dis%21EUR%213.46%211.83%21%21%2126.55%2114.02%21%402103854617103473858987211eea8e%2112000035902824343%21sea%21ES%21197670400%21&curPageLogUid=erA4vf0EDvhZ&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">Switch</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/1005005911075741.html?spm=a2g0o.productlist.main.1.337c5f14Q6DWcP&algo_pvid=b20bbf03-bccb-4e5b-904d-adf050930eca&algo_exp_id=b20bbf03-bccb-4e5b-904d-adf050930eca-0&pdp_npi=4%40dis%21EUR%212.76%212.68%21%21%2121.13%2120.55%21%402103847a17103475050232872ea920%2112000034811093207%21sea%21ES%21197670400%21&curPageLogUid=o7KVlA7uBmIJ&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">Heat shrink</a></li><li>6 x Screws (M6x25)</li><li>6 x brake nuts</li><li>1 x Resistance 10 ohms</li><li>1 x washer</li><li>Electric cables</li><li>Glue</li></ul>&nbsp;<figure class="image image_resized" style="width:61.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_e93506f46f363.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Assembly instructions:&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_c1fd65dc9472f.png"></figure>&nbsp;<figure class="image image_resized" style="width:45.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_3b37f1ad28a58.jpg"></figure><figure class="image image_resized" style="width:44.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_33c21b9a3f631.jpg"></figure>&nbsp;<figure class="image image_resized" style="width:54.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_6776c7a6b3ae1.jpg"></figure>&nbsp;<a target="_blank" href="https://www.instagram.com/reel/C4axH8-NaaX/?igsh=N3BvZW16d3hwZTcy" rel="nofollow noopener">https://www.instagram.com/reel/C4axH8-NaaX/?igsh=N3BvZW16d3hwZTcy</a>&nbsp;&nbsp;

Batsignal with LED kit and battery

Lights

Cosmin.solo

Animals shaped earrings, 4-5cm tall and 5mm thin, with geometrical shapes.Animals used: 2 cats model, parrot, eagle, elephant, dolphin and cheetah.I didnt uploaded printing profiles yet, since mine still needs fine tunning. Will up some as soon as I get them right.I used some low cost earring accesories bought for 2$ a bag in a DIY store.I used a lighter to heat the metal so it can be inserted in the shape. You can fit it anywhere you think is the right spot (I didnt really chosed the perfect spot for the eagle, since it  looks like is hanged to death :-P )Please comment if u find weak spots, so I can repair!&nbsp;Enjoy!!!