H-Printed

blecheimer

Is it only me?I do not know what to do with my fingers. I always need something to play around with. And I always feel the urge to design and print things. Why not just combine both habits?&nbsp;This is a print-in-place threaded nut & bolt fidget toy. Just rotate the inner ring to let it go up, then rotated in the other direction to let it go down... OK, you all know how a thread works.&nbsp;The print can be challenging as it has some overhangs inside the the ring that are hard to be cooled. The ring also lays with one single line on the bolt. I fine-tuned the model and the settings for two printers (Anycubic I3 Mega and Bambu Lab P1S) and did a lot of test-prints with different PLA brands: Sunlu Meta PLA, Sunlu PLA+, Eryone PLA, Voxelab PLA and 3D Jake Eco PLA. For all prints I used the generic PLA filament settings in Bambu Studio.&nbsp;Print it slowly, no need to hurry. Use a layer height of 0.16mm. 0.2mm layers do also work but then the overhangs are not so nice. Use 3 walls, 5 tops, 4 bottoms, 8% gyroid infill and no supports. Set the speeds to 60mm/s outer, 120mm/s inner, 60mm/s tops and 200mm/s for all infills. The logo will not be visible on single-colour prints. This print should take about 100min on a P1S and 180min on a I3 Mega. If you want you can go full colour and split the STL into its single parts. Choose different colours for the bolt, the ring and the logo. If you do not like the logo just choose the same colour / material for it as the bolt has. The logo will then vanish after slicing. A multicolour print needs about 5.5 hours.&nbsp;After the print twist the ring with a little force. This will break the one single line touching the bolt and you can play around with your new fidget toy.&nbsp;&nbsp;Disclaimer: This work by blecheimer is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by-nc-sa/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY-NC-SA 4.0</a> You are not allowed to copy this model to other 3D printing websites without my permission.

Print-In-Place Fidget Bolt

Fidget Toys

TheKirklands

110mm, facedown. Printed in metallic gold and basic back with pink painted on the goggles.&nbsp;Made in the style of @Custom Creations since they are the best.&nbsp;

The Genius

Rick & Morty

Hello A1 Fans!&nbsp;This is my slim line compact Babo A1 Tool boxThe Babo dimensions are 3 x 5&nbsp;Additional Information:Printed in: eSun PLA+ Black PollyTerra Muted WhiteFYI The Polly Terra has been a bit of a problem printing and getting stuck in the AMS 4 to 1 block causing it not to retract. Standard A1 settings plus a brim

Fidget Toys

Rick & Morty

Uploads

Space X