Gymnasium Broich

Yakuza

wall mount clip for power cord socket

electrical power strip wall mount clip

Werkstatt 

Sakul

Revolutionize your workspace with these Brick Stackable Desk Boxes – where playfulness meets productivity! 🧱✨ Unleash your creativity and tidy up your desk simultaneously with these 5:1 Brick brick-inspired organizers. Available in 2x2 and 2x4 sizes, each Box comes complete with a built-in drawer for seamless storage of your office essentials. These bricks are not only five times the size of regular clamping Bricks but are also stackable, just like the iconic building blocks.Mix and match to create your personalized desk masterpiece! Elevate your organizational game and bring a touch of childhood nostalgia to your workspace. The Brick Stackable Desk Boxes – because work can be both efficient and fun!  If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>&nbsp;&nbsp;Check out my newest Uploads <figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-06-04_fa3ccc46fa531.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-05-01_5c7d04a643a0d.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Brick Stackable Desk Boxes

Deko für die Schule

Makerneer

Bring your Honeycomb wall on your next road trip with this clip! I haz all the Organizations!Inspired by the <a target="_blank" href="https://www.printables.com/contest/407-car-holders" rel="nofollow noopener">Car Holders Contest</a> I made this honeycomb wall to car vent adapter after making the <a target="_blank" href="https://makerworld.com/en/models/46589#profileId-48400" rel="nofollow noopener">Gridfinity to Car Vent Adapter</a> because I use both in my organizational battles and couldn&#39;t decide which one I liked more… so I made both…😁And if you&#39;re headed to the drive through, checkout my <a target="_blank" href="https://makerworld.com/en/models/46596#profileId-48405" rel="nofollow noopener">Honeycomb Dipping Sauce Holder</a>Also, we can mix and match both systems with this Gridfinity to Honeycomb adapter <a target="_blank" href="https://www.printables.com/@Chrosta" rel="nofollow noopener">@Chrosta</a> created! <a target="_blank" href="https://www.printables.com/model/281509-gridfinity-honeycomb-wall-baseplates" rel="nofollow noopener">https://www.printables.com/model/281509-gridfinity-honeycomb-wall-baseplates</a>Printing:You know the drill here, inside car = No PLA. I used PETG, ABS/ASA would also work great.I printed it upright to avoid supports. It&#39;s not the strongest orientation but since there&#39;s limited real estate in the car I won&#39;t be overloading it and it&#39;s working well. If you&#39;d like a stronger clip, print on it&#39;s side with supports.

Honeycomb to Car Vent Adapter

Auto

Murata

<figure class="media"><oembed url="https://www.youtube.com/watch?v=jArIfws3gts"></oembed></figure>I designed this toy for my 3 year old to play with so it is intended to be robust enough to survive rough play, and the bucket is slightly oversized for more fun. There’s also an accompanying <a target="_blank" href="https://makerworld.com/en/models/58279" rel="nofollow noopener">dump truck model</a>.&nbsp;Please let me know if any parts break and leave feedback on anything that could be improved upon in the design.&nbsp;The final model is roughly 80 mm wide and everything is assembled with snaps (no glue or fasteners). The only tool required is a coin to tighten the body and tracks together. And there is a hollow pocket for some old AA batteries to add a bit of weight to the body. These are purely optional.&nbsp;Most moving parts are designed with 0.2 mm clearances which work fine on the Bambu X1C but might fuse on other printers. If any joints are frozen or too tight to assemble, try setting <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/xy-hole-contour-compensation" rel="nofollow noopener">XY Contour Compensation </a>to -0.05 mm. The tracks are offered in two variants, 0.15 mm clearance and 0.2 mm clearance in the raw files. My print came out nicely with 0.15 mm clearance track, but I understand this is not possible on all printers. The tracks show the build-plate side, so they will look a bit nicer if printed on a textured plate.&nbsp;<h3>Build Notes</h3>Be careful to install the H-link build plate face out. It’s a common mistake.&nbsp;When loosening joints for the first time, grab or pry as close to the pivot as possible. If a joint is a little bit stiff, it’s pretty easy to snap a piston by pushing on the end.&nbsp;<h3>History</h3>2024-03-30: Added some extra brim to boom cylinders to help with adhesion.2023-12-04: Minor updates to boom to reduce stuck or broken parts and improve bed adhesion.2023-10-13: Several minor design fixes to make parts more robust. I&#39;ve also included half-length track stls for smaller build plates. You need 4 of these per model. And I&#39;ve included a step file of the assembled excavator so that you can preview different colour pallet ideas. And lastly, there is now a single plate profile that crams the whole thing onto one plate if you&#39;re feeling confident and don&#39;t care about colours.

Tracked Excavator

Spielzeug

TerTerro

Train Tracks compatible with Brio/Ikea Small intersection

Train Tracks compatible with Brio/Ikea - M style

Philosophie

9arr3tt

Print Profile for P1P 5x5 is the largest size that fits on Bambu build plates

5x5 Gridfinity Box By Pred

Gridfinity

nldroid

This is the smallest Insta One RS cover i could make. This protects the 360 lenses when you put it in your pocket. It's sturdier than the rubber cover.

Insta 360 One RS cover

on set

BODY3D

If you like my work, support me by leaving a like !Get access to really cool models every months on my PatreonAnd don't Forget to Follow me !<a target="_blank" href="https://www.patreon.com/BODY3D" rel="nofollow noopener"><img src="https://dreamityourselfmusician.com/wp-content/uploads/2020/10/patreon-france.jpg" alt="BODY3D"></a><a target="_blank" href="https://www.tiktok.com/@body_3d" rel="nofollow noopener"><img src="https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcSrfIHeAYT6KeLQTVHxvXORYsILY6oVXlNVmg&usqp=CAU" alt="BODY3D"></a> <a target="_blank" href="https://cults3d.com/en/users/BODY3D/3d-models" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3079230113/draft/2023-08-21_6b0967a6c4cbc.png"></a> <a target="_blank" href="https://beacons.ai/body3d" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3079230113/draft/2023-08-21_63b5664660755.png"></a>

Gnome ( Supportless )

christmas 

tomtom5893

<h2>Hi there, I’m a Tantrix fan and I want to share my passion with you. Tantrix is an amazing game that challenges your mind, delights your eyes and feels great in your hands. It was invented in 1987 by Mike McManaway, a mathematician from New Zealand who loved the beauty of nature.</h2><h3>Tantrix is made of hexagonal tiles that each have three lines in different colors. The goal is to connect the tiles so that you create long loops of the same color. But be careful, you can’t leave any gaps or conflicts.</h3><h4>You can play Tantrix by yourself or with others and choose how many tiles you want to use. There are different ways to play Tantrix that require different skills and strategies. You can find the game rules here: (<a target="_blank" href="http://www.tantrix.com/english/TantrixGameRules.html" rel="nofollow noopener">Rules</a>)</h4>If you are like me and you want to print your own Tantrix set, you are in luck. I have designed a 3D model for the game that you can print with a 3D printer. The tiles are already colored and placed correctly, so you don’t have to worry about that.&nbsp;Note: The case for the game, as shown in the pictures, will be uploaded soon in different sizes for 10, 14, and 56 pieces. Stay tuned!&nbsp;Here are some tips and information for printing:<ul><li>I suggest splitting the tiles into four print beds like this:<ul><li>Bed 1: Tile 1-14</li><li>Bed 2: Tile 15-23 and 31-35</li><li>Bed 3: Tile 24-30 and 36-42</li><li>Bed 4: Tile 43-56</li></ul></li><li>This way, each bed only has four colors at a time, which saves a lot of print time and makes it easier if you only have one AMS (or another color changer).</li><li>You can also separate each tile into its parts, if you can’t print it in multiple colors (but watch out for the tolerances!).</li><li>The files are in multi-colored 3mf format. Each file has multiple bodies, which are named after their color (for example: Line 1 / Yellow).</li><li>At tile 48 and above, you can solve the puzzle in all four colors per number, which is why the numbers are white.</li><li>If you only have a four-color printer, you can just color them in the slicer in more than one color, which should show that any color is possible.</li></ul>

Tantrix Puzzle Game with 56 pieces

games

JamesThePrinter

** Get an early start! Get the <a target="_blank" href="https://makerworld.com/en/models/41177" rel="nofollow noopener">Christmas version</a> now! **&nbsp;&nbsp;Light up different Halloween scenes in this display. A tea light candle is required. The display features a door that opens to allow access to the tea light. Use a section of 1.75mm filament inside the hinge to connect the door to the case. Depending on your printer/setup, this hole may be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.I have included a separate liner. This allows you to print the case in a dark color, but line the inside with a lighter color to allow for more reflection of light outward, making everything brighter.For a complete display, you will need:<ul><li>1x Case</li><li>1x Door</li><li>1x Knob</li><li>1x Snap Ring</li><li>1x Liner - Optional</li><li>1x (minimum) Scene - You can easily remove the snap ring to swap out scenes as desired</li></ul>Check out my other holiday models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener">here</a>.<h4>Print Settings</h4>No special setting are needed for the display case, door, knob, snap ring and liner. &nbsp;Scenes Print SettingsPrint the scenes with 100% infill. The scenes also require color changes:<ul><li>The top 2 layers should be black</li><li>If there is no moon in the scene, all other layers can be white or clear - both look nice</li><li>If there is a moon in the scene, it will look best if the bottom 2 layers are printed in clear filament<ul><li>All other layers should be white</li><li>All non-black layers could be printed in all white or all clear if one isn't available to you</li></ul></li></ul>&nbsp;<h4>Assembly</h4>Glue the knob into the door. Only a very small amount is needed.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_njhnxlluv3as.png"></figure>Put the door in place and latch it. Use a 20mm piece of 1.75mm filament to connect the 3 sections of the hinge. If the filament goes in very easily, it may be a good idea to heat up the top end of the filament ‘pin’ and press it flat. This will prevent the pin from falling through later on.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_ps9jc73zrxio.png"></figure>Open the door. Insert a scene into the opening (image facing outward). Insert the snap ring behind the scene by gently squeezing and placing it into the groove (see red arrow below).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_zosx4sj7pb0v.png"></figure>If you are using a liner, slide it inside the case. This may be a tight fit. Go slowly and be sure to slide it in evenly on all sides.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_t3jeg8v9f9hv.png"></figure>Turn on your tea light and close the door.&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Ivory White PLA</li><li>GIANTARM Transparent Clear PLA</li></ul>

Halloween Tea Light Display

deco

IXPatch

This is a cute little articulated llama 🦙 It can stand on its own and move each leg separately. It is a print-in-place model, requiring no supports or assembly.In addition to the regular single-color version, there is also a multicolor version for Bambu Studio. Enjoy :)

Cute Llama - Flexi Articulated Animal (print-in-place)

presents

CATIAV5FTW

1/2/2024 UPDATE: I have incorporated several minor design improvements to the parts to improve clearances, ease of printing, and ease of assembly. Parts require fewer supports as well. These updates are included in the Jet Engine Model for Kit-006 print profile. This is the latest and greatest profile, so I highly recommend using this from now on. The parts from the previous release, now renamed (OLD) Jet Engine Model for Kit-006, are still compatible with these new parts, however, so you don’t have to reprint the whole thing if you don’t want to.&nbsp;Overview:A cutaway model of a 2-spool high bypass turbofan. I designed the whole engine from scratch with cues to certain existing engines. For example, I think Rolls-Royce makes the best-looking fans, so there&#39;s some resemblance there... Since originally uploading to Thingiverse in 2016, the popularity of this model has grown far beyond expectations. The model has appeared in numerous publications, additive manufacturing expos/conferences, and is (for better or worse) being made and sold by a number of 3rd parties. However, rest assured that this is one of the official sources for this model. A bunch of remixes of this engine are out there, mostly in Thingiverse at the moment, if you are so inclined. I&#39;ve also designed an <a target="_blank" href="https://makerworld.com/models/158422" rel="nofollow noopener">alternate fan for this engine</a> that more closely resembles GE and P&amp;W engines. Check it out!&nbsp;I uploaded a diagram with labels to all parts for reference. For more detailed instructions, the YouTube assembly guide at the bottom of this description walks you through the process.&nbsp;Please refer to the BOM (Bill of Materials, aka Parts List) below for keeping track of what parts to print.&nbsp;===The required fasteners (screws, washers, and nuts) and ball bearings are listed below. However, to make your life easier, there is an official hardware kit that includes these components: <a target="_blank" href="http://shrsl.com/4cfq0" rel="nofollow noopener">Jet Engine Model Components Kit - 006</a>. <ul><li>Metric machine screw, allen socket cap, 2.5mm x 0.45mm x 10mm (QTY 100)</li><li>Metric flat washer, 2.5mm (QTY 200)</li><li>Metric hex nut, 2.5mm x 0.45mm (QTY 100)</li><li>6204 open ball bearing 20x47x14 (QTY 2)</li><li>6003 open ball bearing 17x35x10 (QTY 2)</li></ul>The jet engine will look great in any filament, but what I recommended (and what is pictured) are the following:<ul><li><a target="_blank" href="http://shrsl.com/4cfqh" rel="nofollow noopener">PLA Basic Jade White</a></li><li><a target="_blank" href="http://shrsl.com/4cfqm" rel="nofollow noopener">PLA Basic Blue-Gray</a></li><li><a target="_blank" href="http://shrsl.com/4cfqs" rel="nofollow noopener">PLA Basic Black</a></li><li><a target="_blank" href="http://shrsl.com/4cfr0" rel="nofollow noopener">PLA Metal Cobalt Blue Metallic</a> --OR-- <a target="_blank" href="http://shrsl.com/4cfrd" rel="nofollow noopener">PLA Metal Iron Gray Metallic</a></li></ul><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=dNsBbN54J-I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/dNsBbN54J-I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Jet Engine Model Components Kit - 006 and filament through the links above, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to the public.) ===&nbsp;Good luck and happy printing! Message me with any questions!

3D Printable Jet Engine

education

MakeIt3D

<h2>Summary</h2>Tired of receipts, dust, and other debris clouding your workspace?This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings.This print features a fully functioning built-in swing allowing you to store items inside without things accidently falling out.This item is easy to print featuring 2 main files<ul><li>LID STL</li><li>Bottom STL</li></ul>Total Size of the product is roughly 6 inches Height, 3.5 inches Width, 3.5 inches Length.Feel free to print out the designs and share photos of your results. I would love to see them. All MakeIt3D Designs are made and designed in-house. When you purchase any of these designs you do NOT have the rights to sell the digital files or printed models. 3D PRINTING SETTINGS Printer Used: Bambu Labs X1 Layer Height: 0.2 Infill: 10% - 15% Honeycomb Print Speed: Slow Speed on First Layers Material: PLA Wall Count: 2 Walls