SkoreK

Codyinbody3

As some of you may know I have a ton of honeycomb models printed and put up in my printing room so I thought I'd design a Honeycomb Wall Shelf to put some of my smaller models. These shelves are stackable and dont use a lot of material like the other Honeycomb Shelves I've found. It prints fairly quickly too. Enjoy!

Honeycomb Wall Shelf

Podstawki

Little Maker

This was my first 3D creation, a flexi wolf that is very easy to print.&nbsp;It includes two models, the flexi wolf and another one of a keychain.&nbsp;Hope you like it!

Flexi wolf - Wolf keychain

Breloczki

Smart3d by Gabriel Gomes

the witcher logo  sign

Logo/Napisy

braga3dprint

Unleash the superhero within with this striking 3D printable lightbox featuring the iconic Marvel logo. Crafted with precision and style, this emblematic design embodies the epic world of Marvel's superheroes. Perfect for fans and collectors, this Marvel-themed lightbox adds a touch of heroic energy and cinematic magic to any space, celebrating the legacy of iconic characters and storytelling that have captured imaginations worldwide. If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print, it may interfere, specially with bigger prints! <img src="https://i.redd.it/uo838wkstaqa1.png">&nbsp;&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - remove purge line at the beginning of the print! - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% to 25% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;How to print without AMS:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=RUSTGxOOS_U&t=102s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/RUSTGxOOS_U?start=102" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Marvel Lightbox LED Lamp

Lampki

ME STUDIO

Pokemon Psyduck Keychain&nbsp;Please share with me your printing image. By doing so, you will have the opportunity to receive special printing files such as Pokemon character coasters, keychains, and more.Thank you!&nbsp;If you love my works, please come to download a set of 6 key chain, check out my 3D models library.&nbsp;Dimensions: 65 mm diameter 4 mm height&nbsp;This model is for private use only! Welcome to join my Patreon, you can get monthly models and a welcome package.<a target="_blank" href="http://patreon.com/MESTUDIO" rel="nofollow noopener">http://patreon.com/MESTUDIO</a>

Pokemon Psyduck Keychain

jpokorny12

Egg cookie cutter

Foremki wielkanoc

Brian Dean

<h2>Embedded Magnet Dispenser Tool for Multiple Diameters and Thicknesses</h2><h3>PROFILE NOTE</h3>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.<h3>Latest Update (2024-04-21): Quick summary</h3><ol><li>additional magnet sizes</li><li>magnet size text embossed on the barrel and also included on the slider</li></ol>See below for the more detailed update notes.<h2>Magnet Dispenser for 3D Prints: Simplify Magnet Insertion with Precision</h2>The Magnet Dispenser Tool is expertly designed to streamline the insertion of magnets into 3D prints. This tool not only speeds the process of inserting magnets into 3D Prints, it also ensures correct orientation and secure fitting, making it ideal for projects that require precise magnet placement.<h3>Key Features</h3><h4>Dual Dispensers for Perfect Alignment</h4><ul><li>Includes two dispensers for each magnet size – one for north-up and one for south-up orientations</li><li>Use different colors (e.g., red for north-up and blue for south-up) to help easily identify the dispenser&#39;s orientation</li><li>Eliminates the hassle of misaligned magnets</li></ul><h4>Design and Utility</h4><ul><li>Developed after extensive refinement</li><li>Allows for friction-fit insertion and is also suitable for magnets that are glued</li><li>Tapered tip facilitates use in tight spaces</li></ul><h4>Ease of Use</h4><ul><li>The dispensers are designed to accommodate the specified magnet sizes for their internal holding magnets, but can dispense magnets of any thicknesses for the specified diameter. For example, for the 6x3mm dispenser, you will need 6x3mm magnets to assemble the dispenser, but once assembled, that dispenser can dispense any 6mm diameter magnet such as 6x1, 6x2, 6x3, 6x5, etc.</li></ul><h4>Convenience and Storage</h4><ul><li>Features a snap-on cap with an embedded magnet and a top slider magnet</li><li>Ensures secure storage and prevents accidental magnet spillage</li></ul><h4>Customization and Printability</h4><ul><li>No supports needed for printing</li><li>STL and STEP files included for personal customization</li><li>Compatible with PETG, PLA, ASA, ABS, etc</li><li>Adjust x/y hole compensation if needed for perfect fit</li></ul><h4>Visual Guide</h4><ul><li>Fusion 360 images provided for easy assembly and understanding of the internal mechanism</li></ul><h4>Use the Magnet Dispenser for a hassle-free, precise, and efficient magnet insertion experience in your 3D printing projects.</h4><h3>Supported Magnet Sizes</h3><h4>Dispensers are now provided for the following magnet sizes as of Version 5</h4><ol><li>2x1mm</li><li>2x2mm</li><li>2x3mm</li><li>3x1mm</li><li>3x2mm</li><li>3x3mm</li><li>4x1mm</li><li>4x2mm</li><li>4x3mm</li><li>5x1mm</li><li>5x2mm</li><li>5x3mm</li><li>6x2mm</li><li>6x3mm</li><li>7x2mm</li><li>7x3mm</li><li>8x2mm</li><li>8x3mm</li><li>8x4mm</li><li>9x2mm</li><li>9x3mm</li><li>10x1mm</li><li>10x2mm</li><li>10x3mm</li><li>12x2mm</li><li>12x3mm</li><li>15x2mm</li><li>15x3mm</li><li>20x2mm</li><li>20x3mm</li></ol>NOTE 1: The 1mm magnet thickesses are just too thin to work reliably with the friction-fit of the slider and caps. Therefore, I have made the pockets of the “1mm” thickness magnet dispensers to be that of the 3mm variety so that they work. So to assemble a 1mm magnet thickness dispenser, you will need to purchase a few 3mm thick magnets to assemble the dispenser. A 2mm thickness will likely work ok, too. Note that the text on the dispenser will still say “D x 1 mm” for the barrel, “Dx1” on the cap, and “D/1” on the slider, so you know what magnets you have loaded into it.&nbsp;NOTE 2: the above are the sizes needed to assemble the dispenser. The dispenser can still dispense any thickness of magnet as long as the diameter is the same. So if don&#39;t see your specific magnet thickness listed above, you can still print the correct diameter, assemble the dispenser with the correct magnet thickness, and dispense other thicknesses.&nbsp;STEP and STL raw files are included if you do not wish to use the provided profile.<h3>Quality Assurance Testing</h3><ul><li>All dispenser sizes have been printed by me and extensively tested</li><li>I have purchased all magnet sizes at significant expense to myself to ensure fit</li><li>Magnet diameters are tricky for press-fit tolerance and controlled by no less that 5 Fusion 360 parameters that must be balanced to achieve good fit<ul><li>Multiple iterations of each dispenser were printed and refined</li><li>Many kilograms of filament and hundreds of hours of print-time were consumed during this process</li><li>All to ensure the best quality printing and fit-up for each dispenser size</li></ul></li></ul><h3>About the Profiles</h3><ol><li>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</li><li>NOTE: The “Designer” profile is a single profile that contains plates for all magnet sizes so far. Please ignore the “total time” reported by MakerWorld for the profile. You only need to print the plate(s) that you need. Each plate takes about 2.5-2.9 hours on my X1C using the included “PETG” profile which is slowed down for good PETG layer adhesion and quality.</li><li>While the other profiles may be ok, their file / update version may be out of date. So if you want the latest sizes and model improvements, please choose the top “Designer” profile.</li></ol><h3>Accessories</h3>Be sure and check out some nice accessories that other folks have created to work with these dispensers.<ul><li>Tip Caps - these are nice caps for the dispensor tip. Not only do they help keep the magnets contained within, but they also protect the tip. Additionally, they are labeled with the magnet size, which is nice. Thank you @onegotowned ! <a target="_blank" href="https://makerworld.com/en/models/149038#profileId-162633" rel="nofollow noopener">https://makerworld.com/en/models/149038#profileId-162633</a></li><li>Vertical Workbench Stand - This is a very nice stand for select diamagers made by @nickramsey57. A number of folks have asked about stands / organizers for the dispensers, so this model will likely be useful to a number of folks. Thank you @nickramsey57 ! <a target="_blank" href="https://makerworld.com/en/models/206388#profileId-226561" rel="nofollow noopener">https://makerworld.com/en/models/206388#profileId-226561</a></li><li>Vertical Workbench Stand (parametric) - Here is another very nice stand made by @RevHazlett. You can specify the dispenser sizes that you want it to hold and then generate, making it customizable to your needs and the common magnet sizes that you use. Thank you @RevHazlett! <a target="_blank" href="https://makerworld.com/en/models/435087#profileId-340031" rel="nofollow noopener">https://makerworld.com/en/models/435087#profileId-340031</a></li></ul><h2>Update History</h2><h3>Version 5: 2024-04-21</h3><ol><li>Emboss the magnet size text on the Barrel (see photos), allowing one to view the size from the side, and also allowing one to print all of the barrels on a single plate and not get the barrels mixed up as to what size they are for.</li><li>Include the magnet size text on the Slider (see photos), allowing one to print all of the sliders and caps together on one plate and not get the sliders mixed up as to what magnet size they are for. Also provides additional text identification of the magnet size within.</li><li>Include 11 new magnet sizes:<ol><li>3x1mm</li><li>4x1mm</li><li>5x1mm</li><li>7x2mm, 7x3mm</li><li>8x4mm</li><li>10x1mm</li><li>15x2mm, 15x3mm</li><li>20x2mm, 20x3mm</li></ol></li><li>Re-organize the plates so that they are a little easier to manage. All dispenser sizes for each “diameter” are spread across three plates now - the Barrels, the Red Caps and Sliders, and the Blue Caps and Sliders. This allows one to “print-by-layer” instead of “print-by-object”, and the text also comes out better. Additionally, it is now easier to construct a plate with all of the size variations on 3 individual plates and print them all at once.</li></ol><h3>Version 4: 2023-12-26</h3><ol><li>Fixed an issue where the smaller diameter magnets such as the 2mm, 3mm, and possibly the 4mm magnet diameters could inadvertently slip through the vertical barrel slider stem slot. Prior to this update, the slider stem was a fixed 3mm + tolerance width. With Version 4, the slider slot is now dynamic based on the magnet diameter. So now, the smaller diameter magnets are captive within the barrel and cannot slip out inadvertently.</li><li>Tighten up the tolerances between the “slider” and the “barrel” for a better fit and smoother operation.</li><li>Use the Profile: “Version 4: All Sizes …” for the latest from this update.</li></ol><h3>Version 3: 2023-12-22</h3><ol><li>Added additional magnet sizes<ol><li>2x1mm, 2x2mm, 2x3mm</li><li>9x2mm, 9x3mm</li></ol></li><li>Text is now added within the Fusion 360 Model File, eliminating the need to add the text using Bambu Studio<ol><li>Ensures consistent text placement and easier colorizing of the text</li></ol></li><li>All plates are included for all magnet sizes, two dispensers per plate, print sequence: print-by-object</li></ol><h3>Version 2.1: 2023-11-28</h3><ol><li>Added additional magnet sizes<ol><li>3x2mm</li><li>4x2mm, 4x3mm</li><li>5x2mm, 5x3mm</li><li>6x2mm</li><li>8x2mm, 8x3mm</li><li>10x2mm, 10x3mm</li><li>12x2mm</li></ol></li><li>The magnet size text is included on the cap for easy identification - see photo</li></ol><h3>Version 2: 2023-11-20</h3>Updated to “Version 2”. Significant updates an enhancements have been made, some seen, some unseen.<ol><li>Added additional magnet sizes<ol><li>3x3mm</li><li>12x3mm</li></ol></li><li>Each magnet size is on its own plate, two dispensers per plate, print sequence: print-by-object</li><li>Redesigned “thumb slider” for greater comfort and stronger press force</li><li>Slider stem has been reinforced</li><li>Many enhancements for smoother operation with internal chamfers and fillets, enhanced tolerances, and strengthening of key internal components</li></ol>&nbsp;&nbsp;&nbsp;

Embedded Magnet Dispenser Tool for 3D Prints

Uchwyty do magnesów

Jéjé l'ingé

<h4>Summary</h4>Some people told me that the first ring was too big for their printers, so I created this little one (< 11 cm).Link to the big one : https://makerworld.com/en/models/194247TUTORIAL (English SUB):&nbsp;<figure class="image"><a href="https://www.youtube.com/watch?v=YRV_u-nZ5yQ" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/558366/2024-01-30_508d003bb15648.png"></a></figure>&nbsp;&nbsp;All the components : <a target="_blank" href="https://jeje-linge.fr/pages/mini-lord-of-the-rings-lamp" rel="nofollow noopener">https://jeje-linge.fr/pages/mini-lord-of-the-rings-lamp</a>Code : <a target="_blank" href="https://github.com/jejelinge/MINI_LOTR_LAMP" rel="nofollow noopener">https://github.com/jejelinge/MINI_LOTR_LAMP</a>Libraries : Adafruit NeoPixel by AdafruitThis is pretty simple to make and everybody will stuck on this lamp.YOU HAVE TO USE WHITE PLA OTHER COLORS WILL BE TOO DARK AND THE LIGHT WON'T GO THROUGH.<h4>Print Settings</h4><ul><li>Printer brand: Bambulabs</li><li>Printer: Bambu X1C</li><li>Rafts: Doesn't Matter</li><li>Supports: Yes</li><li>Resolution: 0.2</li><li>Infill: 15%</li><li>Filament brand: Sunlu</li><li>Filament color: Black and white</li><li>Filament material: PLA</li></ul>

LOTR Lamp for all printers

LotR

Calzune

<h2>This is a 3 part silhouette box to hang on the wall or place on a desk etc.</h2>Dimensions: 234*234x48mm<ul><li>The box needs support on the two holes show like the picture below</li><li>The box fits on a 256mm plate but you need to adjust the placement manually, I placed it on: X 125.80 Y130.66 Z 24.22</li><li>I printed it at 0.2mm layerheight.</li></ul>For my print I used: <ul><li>SUNLU Pla+ ORANGE</li><li>ELEGOO Pla BLACK</li><li>Esun Pla-lite RED</li></ul><h4>I hope you like it! =)</h4><img src="https://makerworld.bblmw.com/makerworld/draft/583825/2024-02-24_1dc0ba2bb5563.jpg">

Dragonball Silhouette Box (NO AMS NEEDED)

Dragon Ball

Wallart 3 pierwsze pokemony

Wieża Hydroponiczna

CoNcLuZiOn

<h4>Bookmark - Hearts HUEFORGE</h4><h4>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</h4><h4>Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Pink At layer #22 (1.84mm) swap to Jade White for the rest.</h4><h4>Other bookmarks: </h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/682650/2024-03-11_528a2ea05b2c5.jpg"></figure>&nbsp;

Bookmark - Hearts HUEFORGE

Zakładki do książki

enricoRE

Hogwarts castle Harry Potter HueForge&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Blue At layer #9 (0.8mm) swap to Orange At layer #17 (1.44mm) swap to Yellow for the rest.

Harry Potter Hogwarts castle HueForge

Obrazy

reddadsteve

Wile E. Coyote, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros.He is a cunning, devious and constantly hungry coyote repeatedly attempting to catch the Road Runner. Instead of using his animal instincts, the coyote uses absurdly complex contraptions to try to catch his prey, which comically backfire, with the coyote often getting injured in slapstick fashion.No supports are required. One piece contains built-in supports and two other parts contain built-in braces. Optional parts without the built-in supports/braces are also supplied if you want to use your slicer supports (see notes below). If you have the proper filament colors, no painting is needed.The assembled model is 175mm tall, 315mm long and is mostly in proportion to my previously released Looney Tunes models.Enjoy!...........................................................................................................Special shoutout to maker Benoît Lussier for providing QA printing, helping me work through my mistakes and quality feedback............................................................................................................**Print Instructions:** Supports: No Resolution: .2mm Infill: 10% (infill for body_front should be higher for strength in the arm, 20%)Notes:**Refer to the notes below for a few helpful printing and assembly instructions............................................................................................................**Building the model**ColorsBlack: (Paramount3D PLA - Black) eyes_black_left eyes_black_right nose cart_wheels (contains four identical pieces) toe_nails (contains six identical pieces) match_stick star_black_back_left star_black_back_right star_black_front_left star_black_front_right ..Beige: (Paramount3D PLA - Universal Beige) rope_back rope_middle rope_front fuse ..Yellow: Paramount3D PLA - Simpson Yellow) flame_yellow eyes_yellow_left eyes_yellow_right ..Orange: Paramount3D PLA - McLearen Orange) flame_orange ..Grey: Paramount3D PLA - Prototype Grey) cart_leg_left cart_leg_right cart_pins (contains four identical pieces) ..Blue: Paramount3D PLA - Autobot Blue) acme (contains all the letters for ACME CO.) ..Dark Yellow: (Paramount3D PLA - EggYolk Yellow) star_yellow_back_left star_yellow_back_right star_yellow_front_left star_yellow_front_right ..Dark Red: (Paramount3D PLA - Iron Red) eyes_red_left eyes_red_right ..Red: (Hatchbox PLA - True Red) flame_red rocket_nose rocket_body rocket_body_back (optional piece) rocket_body_front (optional piece) ..Light Brown: (Polyterra PLA - Wood Brown) face face_without_braces (optional piece) ear_inside_left ear_inside_right eyebrows ..Medium Brown: (Polymaker PLA - Army Brown) cart_top body_back body_middle body_front bopy_front_without supports (optional piece) ears (contains both ears with braces to make printing easier) ear_left (optional piece) ear_right (optional piece) ..Any color: (hidden piece): pin_rocket_body (optional part only needed if the two part rocket is printed) pin_body (contains two identical pieces) .............................................................................................................**Printing and assembly tips**Printing tips 1 - No supports are required. One piece contains built-in supports, body_front. An optional part without the built-in supports is also supplied if you want to use your slicer supports. The built-in supports are designed for a .4mm nozzle and for the size that the model is presented. Use your discretion for which part to use if you resize the model significantly.2 - The right arm on body_front is a quite fragile, just below the elbow, (until the guling process which holds everything together). Be very careful when removing the supports and handling the part.3 - Optional rocket body parts. Both a one piece rocket body as well as a split rocket body (with pin) is supplied in case your printer Z-height cannot print the one piece. My print contains the two piece rocket body, with the seam hidden by the middle rope.4 - Optional ears parts. I tried printing the individual ears with a raft and still had a print failure due to the smallish base on the ear parts. So, I created a part that contains both ears with braces to hold them in place while printing.5 - Face contains built-in braces to hold the part down while printing. An optional part without these braces is also supplied.6 - There are some pieces that may need brims or rafts, use your discretion. When setting up my prints I prefer to be conservative to ensure the least chance of a print failure, especially since the base of many parts are hidden when inserted into another part. *I used brims on: - eye_right - eye_left - toe_nails - flame_yellow7 - When removing parts from the printer bed, it's a **VERY** good idea to place left/right parts into separate containers to help with the assembly process. Sometimes the difference between the left and right parts is very small but it is still worth keeping track of them and assembling them in their proper place... Assembly tips:1 - Take your time gluing the model together and enjoy the process. Dry fit all the parts and give some thought into which parts to glue together as groups and then gluing the groups together. Let the glue for each group set completely before combining groups.2 - I used 3D Gloop and E6000 to put this model together. I am not affiliated with 3D Gloop but have experimented with different glues for my models and have found that this glue is a great option for my models. Each type of glue has different pros/cons and I found that 3D Gloop was far easier to use than superglue (for me). The E6000 sticky glue that I also use allows more time to position parts and is still the best for smaller parts. 3D Gloop covers the middle ground for me and really works wonders. It leaves enough time to set, so parts can be positioned correctly and it dries fast enough to hold awkward parts without the need for taping. I used the PLA version that comes in a tube. For both glues using a smaller amount is usually better than more glue.3 - **important** The right ear (with insert) is inserted from below the right arm into the body_front. When glued, it should not only be glued at the attachment point but also to the arm to give the arm some support.4 - The cart legs are taller in the front, to help tilt the model slightly upwards.5 - The ropes should be flexible enough to be stretched to go over the body and rocket. Note that each rope is different and that they should fit all the indents perfectly, especially at the base. It a rope does not fit flush, flip it around.6 - In order to get the flat ACME letters to glue properly to the rocket, I spread a thin layer of glue on the whole letter, placed it in position, and then used a heat tool or hair dryer (very low temp) to soften the letter enough that it could be pressed down. Note that one 'M' (right side) and one 'O' (left side) are cut so as not to interfere with the rope indent.7 - Refer to the assembly diagrams in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.Do not hesitate to ask questions, feedback is essential to making better models.&nbsp;&nbsp;

Wile E. Coyote

Figurki

PartyLime

GEN 12: please see my profile for the GEN 12 ball. There&#39;s a limit of 500mb on one page so I had to make another for the latest Gen. It bounces really well and feels super durable in TPC I wasn&#39;t satisfied with the current models of the airless basketball on here as they only had a single lattice. This took me days make sure the double lattice worked in CAD - SolidWorks was not built for this! As I don&#39;t have $2,500 to spare, I worked from the images available online.I printed it in TPU. It doesn&#39;t bounce as much as a standard basketball in TPU so I suggest a stiffer material.&nbsp;GEN 9: I have added a gen 9 version. It is a little closer to the original and should weigh about the right amount when printed in TPU/PLA&nbsp;GEN 10: I have adjusted the size of the hex holes and increased the filled on them. I&#39;ve also increased the lattice thickness to 8mm to hopefully increase bounce. The logo on the top and the airless gen 10 tag have also increased in size a little to improve how they look. Lastly, the holes around the seam are now pentagons as in the original ball&nbsp;GEN 11: I have added a new version with cut-outs throughout the seams. This will hopefully make the bounce more consistent.&nbsp;The original version I uploaded was removed due to “abnormal download data”. MakerWorld support took all my points but said I could re-upload so here it is again. Hopefully that won&#39;t happen again. MATERIALS:Extrudr Hard TPU (58D) - good durability about 40% bounceOverture Super PLA+ - 100% bounce but broke easilyOverture easy nylon (PA6) - broke almost instantly (the community have suggested “annealing” the print in water to increase durability)BASF Forward AM Ultrafuse TPU 64D - good durability and 60% bounce (BEST SO FAR)BASF Ultrafuse TPC 45D - good durability and great bounce. I recommend annealing this one at 110°C for 10 hours at least.

Airless basketball

Piłka Dzordan

PeterB

What's better than gridfinity or the honeycomb storage wall? A set of drawers that work with gridfinity AND the honeycomb storage wall. This is fully parametric so you can adjust everything, but the STL's are sized to fit on my Bambu A1 Mini. &nbsp;You need to superglue the baseplate on top of the drawers.&nbsp;Pictured with standard gridfinity bins (Up to 5U on top of the drawer) and standard honeycomb-wall accessories.&nbsp;&nbsp;&nbsp;

Gridfinity and Honeycomb wall modular drawers.

Boxy i organizacja

3Demon

DINOSAURS Kit CardsKit cards are fun, all-inclusive 3D prints that are printed flat and then assembled. This compact, 3D printable design combines the concept of a postcard with the joy of 3D printing. You can gift it to someone in an envelope and build your own Jurrasic park.This is a digital 3D printable model of 5 Dinosaurs kit cards. The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.Models of 5 kit card dinosaurs. It is printed flat and then assembled Data ready for 3D printing in STL format 3D Models are fully ready for Simple 3D printing on SLA, SLS, and FDM printers Data ready for 3D printing: 5 STL kit cardsSIZE At 100% scale the model’s dimensions are approximately: Width 85 mm Length 85 mm Height 2,4 mmOnly Stegosaurus and Triceratops differ in sizes: Stegosaurus width: 116 mm Triceratops width: 156 mm Triceratops length: 87 mmYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.3D PRINTING SETTINGS We use these settings for most of our prints: Layer height 0.2 mm Infill 15 % Printing settings will vary greatly depending on your specific printer.NOTE:To highlight the dinosaur scales, use the color-change feature of your slicer.ASSEMBLY:- Use small cutting pliers to free the pieces from the kit card. Have fun building your own Jurrasic park. :)- Stegosaurs plates are in order from back to the front. Don't mix them up :) Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: <a href="https://3d-mon.com/links/" rel="nofollow">https://3d-mon.com/links/</a>

Dinosaurs Kit Cards

Dinozaury

SamActivity

Rocky Paw patrol cookie cutter

Psi Patrol

DodoDrone

Minimalist Underdesk Drawer - Bigger Version If you want to print smaller version here is link: https://makerworld.com/en/models/228585#profileId-246121 I present a small drawer made in a minimalist style. My main goal was to create a drawer that was as easy to print as possible and used as little filament as possible. I wanted it to be possible to print the entire drawer even on A1 Mini.If the reception of the project is positive, I will prepare an even more "slim" version, or, if necessary, in other sizes and with the possibility of attaching it with screws.&nbsp;To attach, just use good double-sided tape.&nbsp;Dimensions: width 10cm, length 13cmThey can be placed parallel to each other.&nbsp;Use the profile with the entire drawer assembly, but it is better to print the parts separately.

Minimalist Underdesk Drawer

Szuflady

DOT-Nobody

Hi, here is my customizable minecraft pickaxe. You can chose the colors you want and click the cubes into the frame.&nbsp;Link to ore lamp:&nbsp;https://makerworld.com/de/models/109931&nbsp;The model (see pictures) was printed on a Mk3s+. I don't want to upload a profile that I didn't print with my Bambu.&nbsp;Note:&nbsp;Needed cubes: 36x brown, 15x light blue, 22x green

Minecraft pickaxe

Minecraft

K-Studio.ca

<h2>A1 Mini Anti-Vibration</h2>Ever felt like an earthquake on your desk with the A1 mini printer? These anti-vibration or dampening pads may help (reduces vibration translate to the surface). Just a special note, this was designed for A1 Mini; it may also work with the A1 but untested.&nbsp;Bonus, these pads also elevates the printer to allow airflow at the bottom of the printer for cooling.&nbsp;<h2>Instructions</h2>Please take a good research on printing TPU materials, it is recommended to slow down the printing speed to avoid stringy result.&nbsp;<figure class="image image_resized" style="width:63.01%;"><img src="https://makerworld.bblmw.com/makerworld/draft/418752/2023-12-17_3e141a6a670ab.png"><figcaption>Final Design Pad</figcaption></figure><figure class="image image_resized" style="width:62.62%;"><img src="https://makerworld.bblmw.com/makerworld/draft/418752/2023-12-17_64e2c60de72bc.jpg"><figcaption>Many Designs Tested with TPU</figcaption></figure>&nbsp;Special Installation for the LCD screen corner.<figure class="image image_resized" style="width:61.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/418752/2023-12-17_2d36c924bf0b08.jpg"><figcaption>One of the pad has an arrow indicator, this is for the LCD screen corner.</figcaption></figure>&nbsp;

A1 Mini Anti-Vibration Pads

Nóżki pod drukarkę TPU

squinn

A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand.  This is a fully printable design, so no other hardware is required.  The clamping mechanism can be adjusted to accommodate boards up to 20 cm in length, and can be installed facing either direction.&nbsp;All STLs are oriented as they should be for optimum printing, which have been designed with the layer lines in mind to result in a strong print (and no supports or brim should be required).

Adjustable PCB Holder Tool

Warsztat

MAP3D

I've seen these things in a picture so I thought that it would be nice to have them printed. &nbsp;You can chose between different models with different numbers of elephants ( 2/3/4 ) I have in plan to design also with 5 and 6 but this will come later I think. &nbsp;In addition, you can add text in BambuSlicer if you want -- I have an example in the pictures---so be creative :). &nbsp;Feel free to rescale the models as you want, but take into account that I've designed them to print the heart and the elephants on the same plate but as a separate objects. If you decide to make them too big, you will have to print the heart on another plate. &nbsp;Share your prints with the cummunity ;) &nbsp;&nbsp;&nbsp;

Elephant Family Decoration  - Multicolored + Hearts 

Ozdoby na regał

Golub17

Update  I have accepted all valid criticisms of the stem model. Even though I tried to make the branches thicker and tested many types of supports, it was not enough. Therefore, I made a new remixed model with my own self-modeled leaves. These are printed on the bed (unlike the old ones in the air) and positioned afterwards using heat.I would like to thank you all for printing, sharing your pictures, and commenting. Now, let me address the licensing and give proper credit to the original creators: Rose (original) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/marsmathofficial" rel="nofollow noopener">marsmathofficial</a> on Thingiverse and published under CC BY-NC-ND 4.0 DEED, which means the model can be shared and distributed in its original form. DO NOT SHARE REMIXED VERSIONS OF THIS MODEL I am also sharing the original model; therefore, I am still respecting the CC BY-NC-ND license the original creator chose. Stem (remixed) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/richardtracy" rel="nofollow noopener">Richard Tracy</a> on Thingiverse and published under CC BY 4.0 DEED which means the model can be shared and distributed in its original form or remixed. Base (original) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/richardtracy" rel="nofollow noopener">Richard Tracy</a> on Thingiverse and published under CC BY 4.0 DEED which means the model can be shared and distributed in its original form or remixed. Vase - That's mine, made through MakeMyVase on MakerLab, nothing extra about it. Printing and processing instructions: Rose - should print as it is, i personally like the silk pla look. ;New updated stem (flat leaves) has no printing issues; Stem (old) - this is a tricky one, in an older post here by erin.wang, many had issues printing it. My remix addresses some of these by making the leaf stems thicker and painting custom supports, also, the stem is now longer and looks better in a vase. Print profile has fuzzy modifiers on leaves i personally like them that way. Print instructions: - use high-quality filament, which will prevent 90% of problems - if you encounter any issues, manually set the print speed to 50% (this gives layers more time to cool down) Post process instructions: 1. very carefully remove supports, start by small pieces from leaves and work your way down to the stem 2. carefully trim any excess material  3. use heat to remove stringing (i used a cheap filament your results may be better) and carefully heat the branches under leafs 4. pose leaves to a more natural position while the branches are heated Base - should print as it is, i personally like the fuzzy look. Now something about the rose model, i made myself one modification to it. And that is the hole at the bottom so the final gluing would be easyer. Sadly i cannot share this model with you here or anywhere since the original creator forbids sharing of a remixed model. But i can give you quick instructions on how to do it yourself, that far CC BY-NC-ND cannot reach. 1. Export the model from bambu studio (File - Export - Export all objects as STL) 2. Import in Blender (File - Import - STL) 3. Go to edit mode 4. Select the inner most ring on the underside (use select circle an maneuver around) 5. Press “S” to scale down (move your mouse to scale, click to confirm) 6. Press “E” to extrude (move your mouse to extrude, click to confirm) 7. Export the model from blender (File - Export - STL) 8. Add model to the bambu studio in the original rose profile Even better solution by <a target="_blank" href="https://makerworld.com/en/u/2175230856" rel="nofollow noopener">@tweaqr</a>In Bambu Studio Right click on the rose --> Add nagitive part --> cylinder Click OK to the message box Select Scale from the top toolbar and set the size to 4mm,4mm,4mm Select Move from the top toolbar and set the position to X 0mm, Y 0mm, Z-15mm

Rose with Stem (remix)

Dzień Kobiet

qwiktune

Simple little print in place articulating flexi gecko as a keychain. I created the profile to be dual color so there's one color sandwiched in between the other. You could probably just print it as one color though if you wanted. Should be able to scale it up if you wanted it bigger as well.

Gecko Keychain Flexible

Breloczki do kluczy

Rcrunger

Last of Us Coaster, designed to be printed face down on a textured PEI plate. NOTE: I do not own the rights to the logo in this model, and it is designed as fan art. This is not intended for commercial use.

Last of Us Logo Coaster

Podstawki pod kubek

HpInvent

Here's a cute Bunny/Rabbit for you to print ;) Scale it to your liking. Unfortunately it should be printed with supports. Havent tried it without support, maybe it works. But for the best result you should use the support.It printed very well with the support wich removed easily as you can see in the pictures!&nbsp;Perfect for coloring with the children for Easter ;)&nbsp;Don't forget to print his cute little friends and my other models: <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a> There you can finde more cute animals ;)  <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/662410/2024-03-08_a8a626fc04c78.png"></a> <img src="https://makerworld.bblmw.com/makerworld/draft/662410/2024-02-23_539193d8507ba.png">&nbsp;Happy printing!

Cute easter Bunny Rabbit stretching sculpture / Süßer Osterhase streckt sich

Ozdoby na Wielkanoc

k2thestank

Easy to print and fun to have!Features a slide and lock in Design to hold the Docking station tighter and prevents it from sliding or popping out as easy!<ul><li>You can split the STL's into parts for easier coloring as well if your not using the 3mf file as i have pre-split them in Fusion</li></ul>&nbsp;Stores 12 Game Cartridgestakes approx. 180gramsMaterials: - Crazy GluePrint Settings: - Walls: 3 - Top/Bottom Layers: 4 - Infill: 10% Gyroid Revisions: - Increased size of block for extra game slots and to improve its look- Fixed missing pieces and corrected files that didnt export correctly

Mario Switch Dock - Original System

Nintendo

Tommy95cz

nintendo switch games holder

Podstawki pod gry

omerican3d

polygon elephant stl file very nice details

polygon elephant pot vase

Wazony i doniczki

MrGnarly

Remix includes updated model fixes for easier printing and consistency.&nbsp;All credit goes to the author below<a target="_blank" href="https://www.thingiverse.com/thing:2938602/makes" rel="nofollow noopener">Mario from Mario games - Multi-color by bpitanga - Thingiverse</a>&nbsp;

Mario from Super Mario games

Mario

Think3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #10 (0.88mm) swap to Gray At layer #13 (1.12mm) swap to Jade White At layer #21 (1.76mm) swap to Black At layer #23 (1.92mm) swap to Red for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

Hakuna ma Pokeball - HueForge

Płaskie obrazy

3DP RNS

★ New Robot Unveiled! [3DP RNS] Hexnake V1.0 (3D Printed Robot)<ul><li>Series : 0 Legs / Snake Type</li><li>This Is an all at once print. Assembly not required :)</li><li>If you subscribe to the YouTube channel [<a target="_blank" href="https://bit.ly/2KC3Tdx" rel="nofollow noopener">3DP RNS</a>], ★ a new robot will be revealed.</li><li>Thank you for your subscribing! It means a lot to me :)</li><li>Commercial License [<a target="_blank" href="https://www.patreon.com/3DPRNS" rel="nofollow noopener">Patreon</a>]</li></ul>&nbsp;※ Notice For my uploaded robot model to enable all joints to move, it&#39;s advisable to use a Brim.  If removing Brim is inconvenient or challenging, I don&#39;t recommend printing it.  Also, joint functionality may vary depending on the printer and filament you use. I hope your print is successful and you can have a robot with well-functioning joints.<figure class="media"><oembed url="https://www.youtube.com/shorts/jpbvHRAFfok"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Swift &amp; Stand V1.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-swift-v1-103629009?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_fan&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Swift &amp; Stand V1.0 Download [Patreon]</a></li><li>Swift &amp; Stand V1.0 can be obtained through Patreon (Hero) membership.</li><li>It is an autonomous flying robot with four propellers.It moves swiftly, quietly, and is used for reconnaissance purposes.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/fraLfSPEqCM"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Sentinel Turret V1.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-sentinel-105409279?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Sentinel Turret V1.0 Download [Patreon]</a></li><li>Sentinel Turret V1.0 can be obtained through Patreon (Hero) membership.</li><li>This turret-type robot defends the base with missiles, featuring 360-degree horizontal and 90-degree vertical rotation of its missile pods.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/rOJC8bxL1Bs?feature=share"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Albatross V1.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-v1-0-3d-105852256?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Albatross V1.0 Download [Patreon]</a></li><li>Albatross V1.0 can be obtained through Patreon (Hero) membership.</li><li>This robot takes the form of an airplane drone. It plays a crucial role in swiftly flying at high altitudes to share information.</li></ul><figure class="media"><oembed url="https://www.youtube.com/watch?v=wruJDswgh9o"></oembed></figure>

[3DP RNS] Hexnake_V1.0

Modele

Sakul

🍌 Peeled Banana Lamp 🍌 I know you all love bananas, and now you have the chance to light up your room with this stimulating statement piece. The lamp is designed to work with a <a target="_blank" href="https://www.amazon.de/Eco-Luma-Neutrales-Halogenlampe-Gl%C3%BChlampe-Flackern/dp/B09T9947K9/ref=sr_1_5_pp?crid=HPQKR2D9638R&amp;keywords=g9%2Bled&amp;qid=1707167329&amp;sprefix=g9%2Caps%2C115&amp;sr=8-5&amp;th=1" rel="nofollow noopener">G9 LED lightbulb</a>, otherwise, you only need <a target="_blank" href="https://www.amazon.de/Gl%C3%BChbirnen-Lampenfassung-Keramik-Silikonkabel-ISOLATECH/dp/B094QQTYZL/ref=sr_1_5?crid=2IVMRCJPR1WXF&amp;keywords=g9+fassung&amp;qid=1707167361&amp;sprefix=g9+fass%2Caps%2C101&amp;sr=8-5" rel="nofollow noopener">1x G9 lamp socket</a>, 2x M3x16mm screws, <a target="_blank" href="https://www.amazon.de/EMOS-Stromkabel-Ersatzkabel-Anschlusskabel-Leuchtmittel-schwarz/dp/B014WL12Y0/ref=sr_1_5?crid=2UGYEBPRCJ60P&amp;keywords=steckdosenkabel+mit+schalter&amp;qid=1707167397&amp;sprefix=steckdosenkabel+mit+s%2Caps%2C93&amp;sr=8-5" rel="nofollow noopener">1x power cable</a> fitting for your country, and some CA glue. How to assemble: Attach the endpiece to the banana; you can use a piece of 1.75mm filament as a center point.<figure class="image image_resized" style="width: 47.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-02-05_4ceaa8f473dc5.jpg"></figure>Screw the lamp socket to the lamp plate.<figure class="image image_resized" style="width: 47.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-02-05_473e88e09d946.jpg"></figure>Pull the power cable through the banana and attach it to the lamp socket, I used some Wago clamps for it, but there are other ways that work just as well.<figure class="image image_resized" style="width: 46.85%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-02-05_7650c623ef73c.jpg"></figure>Fit everything in the banana, once it sits well, fix it in place with CA glue.<figure class="image image_resized" style="width: 47.22%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-02-05_c93b2c7abacd3.jpg"></figure>Put the lampshade on, don&#39;t glue it so you can change the lightbulb if needed.<figure class="image image_resized" style="width: 46.77%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-02-05_34b75c7f0d046.jpg"></figure>Put the shell over it, make sure it is aligned so that the banana sits nice and flush on the ground, then glue it in place.<figure class="image image_resized" style="width: 46.3%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-02-05_d66fd87002c9c.jpg"></figure> 🍌Enjoy your glowing banana!🍌  You may also like:&nbsp;<figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-06-04_fcceb05d8801.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-05-01_87983a1115de6.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Peeled Banana Lamp

vellanix

This is a IKEA Skadis board that fit on A1 Mini.The size is 180x180

IKEA Skadis board for A1 mini

Tablica Ikea

Vejstrk

This organizer is designed to carry individual pills as well as plateaus of pills.&nbsp;In addition, it can also serve as a box for various medical equipment that comes in handy on the travel, for example plasters.&nbsp;The design has two storage boxes. The main box is used for plateaus of pills, plasters, etc. The smaller box placed in the Cover is suitable for individual pills.

Travel pill organizer

Pojemniki/boxy

TwistedPears

Update: Dec 25th, 2023 - Added an alternative version of the Base plate that has a small hook on it so that you can manage the USB cable for the camera. I also provided the STEP file for it, so you can tweak it as needed. Description: This is a re-imagining of the Wyze Camera mount by @JohnPepsi and the additional features added by @WagZPrintZ. It can be printed without supports, the 3MF file has the correct orientation for all the model files. Then you can simply press fit the Yi Camera mount into the base, push it on to the front of the A1 Mini, then attach the small latch to help keep it secure.&nbsp;STEP file provided to make it easier to remix. Looking forward to future versions, or maybe adapting this design to new cameras.

Yi Camera Mount - A1 Mini

Kamerka

Encrust3d

This is a L3G0 minifigure mount I designed to clip on to the AMS lite filament hub coming out of the A1 and A1 min extruders. This clip has been designed and tested to ensure the L3G0 minifigure does not go flying when you are printing at full speeds. This model prints in 22 minutes with bed leveling, only uses 3g of filament and needs supports to print. I have uploaded a video here that shows the preloaded speed benchy being printed, while the L3G0 minifigure remains fully in place and does not move at all. This game me quite the laugh to put the flash on top and watch him during the speed benchy print. I haven't hooked my AMS lite up yet, so I am unsure if this blocks auto filament changes.<figure class="media"><div data-oembed-url="https://vimeo.com/898199265?share=copy"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://player.vimeo.com/video/898199265" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allowfullscreen=""></iframe></div></div></figure>WARNING: By attaching this, the tangle monitoring will be disabled. Use only when you are by the printer, do not leave attached long term.

A1 L3G0 Brick Minifigure Mount

Zabawki

3D Accessory

<h2>Brick Mini Figure Hand and Arm Key Holder</h2>NotesHands should be a push fit into the arms&nbsp;Methods of attaching Use double sided tape to affix it to any surface&nbsp;Print ConsiderationsIf you are using your own print profiles, I'd highly recommend for the base plate to increase the wall loops to 5 or 6. This just ensures the arms are plenty strong.

Minifig Hand Key Holder

Projekty Lego

The Big Greek

<h3>Phone Stand 2024 DIAMOND</h3>I have heard that diamonds are a woman's best friend, so I would like to introduce you to the Phone Stand 2024 Diamond Version.No AMS is needed here, but pay attention to your print bed adhesion so that you get a great and best result.&nbsp;I think phone stands are just great. They are easy and quick to print and you can never have enough of them :-)Just print all the parts, stick them together and you're done.&nbsp;If you like my work/project consider supporting me with these options:<ul><li>leave a like</li><li>leave a comment</li><li>download the file</li><li><a target="_blank" href="https://www.buymeacoffee.com/thebiggreek" rel="nofollow noopener">or By me a Coffee</a></li></ul><h3>This article/post/text or the print profile as well as the finished print may not be used for commercial purposes.</h3>Have fun printingTBG&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/539262/2024-02-15_b19ca7ad6ce4f.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/539262/2024-02-15_5c0a83983decf.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/539262/2024-02-15_21889a4a6fdc3.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/539262/2024-02-15_7d5a6e01b092.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/539262/2024-02-15_d20937e340435.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/539262/2024-02-15_a0ee83f2a61c4.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/539262/2024-02-15_b523d18f88b9b.png"></figure>&nbsp;

Phone Stand 2024 DIAMOND(NO AMS NEEDED) 

Uchwyt na telefon

Maker Tom

Beer crate for all types of batteries:&nbsp;The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries&nbsp;Printing without Supports!&nbsp;Happy Printing.

Battery Crate AAA / AA / Box

Box na baterie

Modelicious Creations

<h2>Zip into your next chapter with this zipper bookmark!</h2>This sleek and innovative accessory is designed to resemble a real zipper, adding a a fun and trendy twist to the traditional bookmark. The intricate detailing of the zipper teeth and pull tab creates a lifelike appearance that is sure to catch the eye of anyone who sees it. The pull also features a charming engraving that looks like a book, adding a touch of literary charm to your reading experience. Whether you're an avid reader, a collector of unique bookmarks, or a fan of 3D printed accessories, this zipper bookmark is a must-have item. It also makes for a thoughtful and distinctive gift for the bookworm in your life.&nbsp;Size:<ul><li>approximately 10 cm wide and 11 cm tall for the two-part version</li><li>approximately 10 cm wide and 4 cm tall for the single-part version</li></ul><h2>Assembly</h2>Update 2024-02-12: there is now a print profile version that requires no assembly. However, this comes at the price of generation of lots of supports. Due the geometry of the model you might damage your model while removing the support: the long fin is only 0.8 mm thick and can easily break when not being super cautious. I advise against the profile, but it is your choice.&nbsp;The bookmark requires zero supports if the two part print profile us being used. This means that it is easy to print and all surfaces have a nice finish. This comes at two costs, though. First, you need to wiggle the pull loose without damaging it, because it is printed on top of the slider. And second you connect the zipper and the actual bookmark part using glue.<ol><li>carefully remove from build plate</li><li>gradually wiggle the pull free</li><li>verify that the fin fits into the slot</li><li>apply glue within the notch</li><li>connect the parts and let the glue dry if necessary</li></ol>&nbsp;<figure class="image image_resized" style="width:89.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/643815/2024-02-18_a048da607c85f.gif"></figure>Click on the picture above in case the assembly animation does not play automatically.<h2>Printing Instructions</h2>The zip chain has a lot of edges, therefore make sure the print plate has good adhesion. This model requires zero supports, therefore do not print too fast! Especially the pull can be problematic, since it is attached only with one line to the slider. I recommend to use my print profile, this worked well many times.&nbsp;Printed on an A1 mini with PLA from various vendors (e.g. eSUN) on a 0.4mm nozzle.<h2>Commercial Use</h2>The model on this website is only available for non-commercial use. If you are interested in obtaining a commercial license, please refer to <a target="_blank" href="https://cults3d.com/en/3d-model/various/zipper-bookmark-for-comercial-use" rel="nofollow noopener">Cults3d</a>.&nbsp;

Zipper Bookmark

Żonka

Gabb.99

Planetary Gear Fidget spinner&nbsp;&nbsp;<blockquote>If you like my work and you want to support me to do better, you can buy me a coffe at the following links <a target="_blank" href="https://buymeacoffee.com/GSprint" rel="nofollow noopener">https://buymeacoffee.com/GSprint</a> <figure class="image image_resized image-style-side" style="width:16.72%;"><a href="https://buymeacoffee.com/GSprint" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000060279/design/2024-05-03_858db37117022.png"></a></figure><a target="_blank" href="https://ko-fi.com/gsprint" rel="nofollow noopener">https://ko-fi.com/gsprint</a> </blockquote>

Fidget Planetary gear

Bean Eating Cookies

Another Pokémon cookie cutter and stamp set! Cutter and stamp separate. Have a look at my profile for more cookie cutters and stamps! If you have a request don't hesitate to reach out!&nbsp;If you like what I am doing please consider buying me a coffee or tipping.<img src="https://cdn.buymeacoffee.com/buttons/bmc-new-btn-logo.svg?image_process=resize,w_800/format,webp?image_process=resize,w_800/format,webp"><a target="_blank" href="https://www.buymeacoffee.com/beaneatingcookies" rel="nofollow noopener">Buy me a coffee</a>

Pokemon Cookie cutters and stamps

Foremki do ciastek

ROAR! Another flexible dinosaur that makes a cool little keychain. Prints in place, no supports. Slide keychain through back of the head.

Flexi Dino Keychain

Breloko do kluczy

PRINT3DGIFTS

Scaled all parts down to 50%. All plates have 3x parts to end up with 3 blastoises :) I updated the 3mf file because the black parts didn&#39;t scale at 50% not sure why.

Blastoise Multipart 50% all parts x3

Pokemony

lukaskroll

Easy To print also with the A1 mini. No Supports needed.&nbsp;2x round rod 20mm&nbsp;Printed with PETG Geetech Filament.

Spool Shelf - easy to print also with the A1 mini!

Uchwyty na filament

DDWMAKER

easy to move &amp; not tight too much…There are two versions, the second is  little tighter…

Cable Clip

Części do drukarki

Kugelmann

Cover has been made from scratch, which means it would fit your A1 or A1 mini very well,just pop out the extruder wheel once its printed, and put the parts on the frontend of the extruder.&nbsp;i suggest you raise the infill % since the small tabs can fall off, i never has such issue with this cover, but i can see a few other have.&nbsp;all colors are changeable&nbsp;Stay tuned for more uploads, but meanwhile you can check my other modifications for the A1 and A1 mini :)

A1/ A1 Mini Goofy Guy Front Cover And Extruder Wheel

Front drukarki

KYZ Design

<h3>Bees may have bestagons but humans still build rectangular walls. So here are the rectangular frame pieces!</h3>There are framed pieces for a few different sizes:<ul><li>The 12x9 System - recommended for X1 and P1 series printers - the middle pieces are 12 cells wide by 9 cells high. This makes the biggest pieces per print on a 256x256 bed with a filament cutter exclusion area (i.e. on a P1P/P1S/X1C without physically blocking out the filament cutter). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/16011" rel="nofollow noopener">here</a> and I also included this in the print profiles as it is my model (it's one of the first things I modelled and shared after getting my P1P!).</li></ul>&nbsp;<ul><li>The 12x10 System - recommended for the A1 - the middle pieces are 12 cells wide by 10 cells high. This makes the biggest pieces per print on a 256x256 bed without an exclusion area (i.e. on an A1 or a <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">tweaked</a> P1P/P1S/X1C). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/16011" rel="nofollow noopener">here</a> and I also included this in the print profiles as it is my model.</li></ul>&nbsp;<ul><li>The 8x7 system - recommended for the A1 Mini - the middle pieces are 8 cells wide by 7 cells high. These are designed to maximise the 180x180 bed of the Prusa Mini, and consequently will also maximise the bed of the A1 mini. The middle piece for this system can also be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;<ul><li>The 10x10 system - the middle pieces are 10 cells wide by 10 cells high. These also fit on a 256x256 bed. This makes panels that have a more rectangular aspect ratio and less cells but you may have already started printing these. These may also better fit your wall space that you are trying to fill up due to the slightly different dimensions. The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;<ul><li>The 10x8 system - the middle pieces are 10 cells wide by 8 cells high. These max out a 220x220 bed (Ender 3 and Similar). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;&nbsp;For those of you that want other sizes for other printer beds, remix is allowed! Or leave a request in a comment if you can wait :)&nbsp;If you need HSW help in general, check out the honeycombwall subreddit.&nbsp;<h3>Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models.</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/594876/2023-12-10_fde779d8f407b.jpg"></figure>

Framed HSW - Various Sizes - Honeycomb Storage Wall

Miodowa ściana

vitaprint 3D

Hier biete ich den Ring aus der Trilogie "Herr der RInge" an. Das Modell ist vorbereitet für die MMU und AMS und kann also mit zwei verschiedenen farben gedruckt werden. Am schönsten ist es Gold für den Ring und Glow in the Dark für die schrift zu wählen.

Lord of the RIng MMU AMS

Fajne projekty

This is a holder for 3 bambu lab a1 mini sheets to put them on ikea skadis.

Bambu Lab A1 Mini Skadis Sheet holder

Akcesoria do ścianki

E9-3D

Please consider supporting me with a boost on the new system, would love to have more recourses available to make and share Models!! Made this Headset stand of spiderman. Printet like a boss and now i have a cool place to store my headset slicer says floating object, just ignore this , it will print fine 0.2mm layerhight. No support. lightning infill 15 %. gyriod infill for the buttom part. 3 walls Make sure to check out my other headset stands. * Black Panther - https://makerworld.com/en/models/176323#profileId-193839 **Thanos - https://makerworld.com/en/models/162344#profileId-178199 ***Iron man - https://makerworld.com/en/models/126398#profileId-136594 ****Dead Pool - https://makerworld.com/en/models/140981#profileId-153593 Happy Printing

Spiderman Headset Stand

Stojaki na słuchawki

Bambu Lab

A1 mini test model - Screw Gauge by Bambu Lab

Podstawki

Breloczki

Logo/Napisy

Lampki

Podstawki

Foremki wielkanoc

Uchwyty do magnesów

LotR

Dragon Ball

Wallart 3 pierwsze pokemony

Wieża Hydroponiczna

Zakładki do książki

Obrazy

Figurki

Piłka Dzordan

Boxy i organizacja

Dinozaury

Psi Patrol

Szuflady

Minecraft

Nóżki pod drukarkę TPU

Warsztat

Ozdoby na regał

Dzień Kobiet

Breloczki do kluczy

Podstawki pod kubek

Ozdoby na Wielkanoc

Nintendo

Podstawki pod gry

Wazony i doniczki

Mario

Płaskie obrazy

Modele

Lampki

Tablica Ikea

Pojemniki/boxy

Kamerka

Zabawki

Projekty Lego

Uchwyt na telefon

Box na baterie

Żonka

Zabawki

Foremki do ciastek

Breloko do kluczy

Pokemony

Uchwyty na filament

Części do drukarki

Front drukarki

Miodowa ściana

Fajne projekty

Akcesoria do ścianki

Stojaki na słuchawki

Użyteczne

Użytkowe do domu

Kalibracja drukarki

AMS

Próbki filamentu

Do filemantu

Lampa