I ended up revisiting my current elitebook stand as I wanted to change things up. I made this one from scratch to look minimal while also being easy to wipe dust off of.

Enclosure for a the Ratgdo32 Smart garage door opener board. Just use a piece of vhb tape to hold the board to the bottom of the enclosure. Also includes spots for zip ties on the edges of the enclosure too.

Boost Me Remixed this to fit my M3 Macbook Pro 14". Apples 14" Macbook Pro M Series are all the same thickness so this will fit an M1, M2, M3, M4 and probably and M5 as well.

Made a stand to hold my UCG-Max on my desk to show off how awesome it looks. The accelerometer will rotate the display automatically as well! This will fit all of the Ubiquiti Cloud Gateway models, UCG-Max, UCG-Ultra and UCG-Fiber.

Switched from my Thinkpad to an Elitebook recently and I had to remix this stand as i couldnt find a proper one to fit. The elitebook as a wierd profile with a rubber raised edge along the back. This actually made this stand a bit better as its able to hold the elitebook in place while still keeping a small gap between the stand and the aluminum preventing scratches from any dust or debris that might find its way in as well as provide some extra room for airflow.

Start your own water bonsai! Just put a cutting inside the test tube, add a bit of water and enjoy your hands free mini plant! Its also a simple way to propagate plants! Either mount on your wall with double sided tape or command strips. Or you can use the included stand to display it on a desk or table. Fits a 20x150mm test tube (other sizes can be done upon request!)

Boost Me Made this drip tray replacement for the Philips Baristina machine, this allows greater height to fit taller mugs in while still maintaining the water drip collection. Dont forget to checkout my hopper extendert as well! https://makerworld.com/en/models/2342549-philips-baristina-coffee-hopper-extension

Made this to help keep my car smelling fresh. While still having room to put a cup or can in your cup holders. Refill with baking soda once every month or two. Unscrews and screws back on. Tested for fit in ford focus, toyota rav4, toyota corolla and honda civic. Diameter is slightly smaller than a typical pop can so it should fit any cup holder.

Boost Me Thanks so much! Made these to fit in the top storage tray of the Ikea Mala paper dispenser. A set of 4 will fill the whole tray, made them perfect sized for crayons, pastels, scissors, tape dispensers, mini markers etc. I notice there was alot of variation for the top tray of the ikea mala being made out of wood, so these may have a loose or tight fit depending, however i gave some buffer so it should fit ALL Ikea Mala units!

Made this slide on mount to easily mount tv remotes, smart home sensors and other things on the wall. Back piece used VHB or command strips to stick to the wall, use the same VHB or command strips to stick the other piece to the tv remote or object you want to mount. Removable and no holes required, renter safe!

The baristina is a great machine but alot of my mugs end up being too short for it. This Drip tray replacement fills in the divot of the drip tray so you can fit taller mugs while keeping them stable. I included 2 sizes. The divot filler gives you maximum height. While the tray insert sacrifices an extra milimeter or so to give a more seamless look. FYI will remove your drip tray so there will be nothing to catch water.

Boost Me Buddy got a Philips Baristina and its a pretty great little machine, bean hopper was a bit small for my tastes so i made an extension to help. 3 Sizes as well depending on how much clearance you have under your counters.

Made this hanger that I could take with me places to hang up my backpack & coat to keep them off the floor, also works great on most desks as a headphone holder. Prints well in PLA but PETG will give you extra strength if your bags are heavy.

My old lid broke and i didnt like how restrictive the other lids were. I made my own with wider holes that allow airflow and misdirected hot air to escape while also not allowing any beans to accidentally fall through. Works well in PLA, but I recommend PETG for added durability if you have it.

the original metal drip tray cover got all scratched up from coffee cups and looked pretty rough. Printed this in PLA and it works greay, easy to clean and doesnt scratch up anymore.

I noticed my kiddos were only listening to the same few cards which happened to be the ones visible on top of their decks. I made this card carousel so that they can see ALL of their cards easily and theyve been picking more variety now. Easy for little fingers to pick a card and put them back on their own too!

I couldnt find any of the existing yoto holders that would fit all my kids packs. So I made one with generous sized slots. Theyre intended to hold several card packs together to keep them categorically organized. For example all the science themed cards can go in one, all the dinosaur cards in another, Song cards in another. This way it makes it easy for the kids to put them away themselves and also find the card they are looking for much quicker.

This is a loyalty card / gift card / credit card organiser that easily lets you see all of them at once without having to shuffle through them. Perfect to store all your gas station points cards or random gift cards you get without losing them.

Print this before committing to the full model. Just place it on top of the bean hopper and it should slide in (you might have to push it down a little).

Created a fittest for my delonghi series hopper extensions. Print this before committing to the full extender!