I've been looking for a solution for the large LTT bottle for a while....I've specifically been looking for a solution in my vehicle. A 2018 Chevy Colorado. You're my hero. Thank you for sharing this. I added a Text Cut-out on the outside saying "LTT BOTTLE HOLDER". I'm so happy lol. Thank you!!!!

Printed out using Sunlu 2.0 PLA. Seems like it's going to work great! Haven't used yet but have on hand for the next wall hanging!

Printed with Sunlu PLA 2.0. Works great. Thanks!

Stem part of profile doesn't add supports if printing from phone app. I recommend if you print this that you print it from a computer so you can ensure supports are turned on otherwise you'll likely end up with a bad print of the stem specifically. White dots for the head portion of the plant could really use some sort of label applied to the bottom of them as well as their corresponding spots on head. It's otherwise going to take you a long time to place each one in their specific spot. I'm sure I messed up a few of them, but overall it's not all that noticeable. Cool print all around and it looks fantastic, Just a couple of things the designer can do to make it that much better as mentioned above. 4/5 for execution but 5/5 for overall look once dialed in. Very cool.

fits perfectly. very cool!

Wife loves it.

overall cool. has some design errors on the patience fruit (ironic lol) specifically on the verse “22” one of the “2’s” isn’t fully shown. plan to give as a gift, I think this is very cool. hopefully designer will see the error and correct it for future prints :).

turned out great. supports were a little tedious to get out of the mouth area, but with some patience and a carful hand you’ll have a solid figure.

perfect!

awesome design. had to scale down the guns and the 4 connecting pieces, tolerances were too tight and they didn’t fit correctly for whatever reason. easy fix though. very fun!

very cool

Overall, this is a very beautiful design. The biggest issue that I have with this is actually in the assembly. The tolerances are simply too tight in order to actually fit the pieces together without a piece breaking. I had two different pieces end up breaking on me because the pressure ended up exceeding what the actual connections could accommodate. because I’m dedicated to get this print completed, I’ve decided to simply epoxy the broken pieces back together. I also had to heat up the top portion with a flame just to get it to slide in. If possible, I recommend the designer to loosen up the tolerances ever so slightly to where you still have a snug fit, but you don’t risk breaking it while trying to put it together. if it helps, I used Sunlu plus 2.0 PLA. Maybe that’s playing into the super tight tolerances somehow. either way this is still the most attractive design I found on here so kudos to that.

Turned out great. Will be a nice addition to the office. went for a “white wood” look. used white, wood, and green filament.

Absolutely LOVE this. Fantastic design.

Cool Design, thanks for sharing this! I did run into similar issues as other comments regarding the white plate not showing up after splicing or printing with it. Doesn't bug me though, still a very cool design.