Since my wife was always struggling with keeping business cards on her, I had this idea to have a keychain/fob with her logo with a nfc tag embedded in it. I went through a few different stages and finally managed to get it working. On the first two prints, I was using a .4 mm print head and just felt that I wasnt getting the detail I wanted. (that and the second print, for some reason, the slicer used black around the nfc tag so it discolored the pink in the logo. The final print, I used a .2 mm print head and even though it took FOREVER to print, I think it came out pretty darn well. The nfc tag points to her landing page with all of her business contact information. I originally was planning on it just having the vcard file but since apparently iPhones don’t like those… I chose just to link it to her landing page. Also this was a HUGE learning experience with tinkercad, adobe illustrator, and bambu slicer.