Spiral out.

A very high quality print here. Everything is separated out by parts for easy single color printing, yet still has location or attachment points built in for assembly, very clean. I printed it at 0.16mm layer and the joining points were all flawlessly smooth. Used all Bambu colors, Gold Silk for the honey really made it pop.

Such a clean print. A big fan of the 1 line per layer weaving, instead of thousands of circles and retractions. Bambu PETG-HF, no issues. Great mesh size for the typical, small, 3mm rechargable beads.

10/10. Everyone I know with a cat will now be randomly receiving a color coordinated paw. 🤣 Went with Blue key switches for that optimal, annoying, CLICK. "hey send me a pic of your cat's foot, it's for nothing weird, I swear."

10/10. Such a clean set. Printed flawlessly out of Bambu PETG-HF. Love the weaved, single line build design, way better than stacking thousands of concentric circles making diagonal holes. Are the five container units split into two so I can maintain them with spools loaded by sliding out the rear, followed by the frontnfor each stack? Seemed like they could just be one unit with a slightly larger internal volume (after removing the two shared external walls) if they were merged into 1 piece. The AMS Pro 2 can heat and maintain the silica, so I don't see myself removing these that often, I would personally go for one, larger box per section if given the option.

Such a nice set, 10/10. Printed flawlessly in Bambu PETG-HF.

Perfect addition to an already fantastic set of prints. So useful.

10/10 holiday cheer. Eyes optional but recommended 😂

10/10 holiday cheer. Eyes optional

Pretty nice design, fits, eh, well enough, on my P2S. The rear did not fit the printer. One side the channel is appropriately seated on the edge of the printer, and the other side pulled too far over to fit. Rigid plastic here, no play.. The rear connecting frame length is too short by like 1mm. I would also slow down some of the settings personally to retain dimensionality of the holes. One thing to mention, it was reported and notated that the logo was fixed? It is not quite there yet. You flipped it from top to bottom to be correct, but you also need to flip it left/right 180 degrees. The left and right chutes on the logo are incorrect still.

Very cool, aesthetically pleasing. Easy to use Cut in Bambu Studio to make a 4 plate into a 2 plate. Magnet serves no purpose on the P2S though? even though this design is for the P2S? It's all plastic on the printer, no metal on the sides down there for a magnet to function. Not even bed scrappers can mag to anywhere on either side. Just an observation.

10/10, easy to print, fit the card immediately. I modified the ring style loop in favor of a wider one for the snap style flat loops that go through the badges usually. I'll upload it if anyone would find it useful as well. I enjoy the hex aesthetic and there weren't any with a 100% open front (except this one) for scanning the ID bar code, and a wide loop slot.

This profile of pins, is the only reason this model works with PLA.

Printed great and assembled as expected. We'll see if it saves the spool that unlocked on me, sent from Bambu. (Wasn't a refill that I didn't lock properly 😴) Oh also, doesn't fit on the external holder once you add this, that would be nice to know ahead of time.

Fits the small Kroger spice perfectly. I chopped off the top row to fit under my shelving in Bambu Studio with Cut. Excellent rack design, appreciate the "print as many as you need" style with attachment clips.

Beautiful design. Absolutely love a threaded project versus glue. Also the handmade supports on the stem are fantastic, I've had past projects get wobbly when vertical. 10/10

Immaculate fit on the parts with no AMS. Bravo.

Great geometry. Tweaked the tree supports.

Cute lil guy. The tolerances are not doable, I get the impression it was cut into separate pieces inside like Fusion from 1 solid with no tolerances added for assembly. The pegs need sanding, and the eyes do not pop into the cutouts in the face, I didn't even attempt the mouth or cheeks. I painted the pupil in after scaling the black to 98% so it would sit in the face, and the indent is enough for the other features for me. I also modified the Apple charger to work for a Galaxy 6 fast charger.