Gibbo23

Zion Wang

A 3D printed solder stand that can be easily installed without fasteners. It features a minimalist design.Coil size: External diameter less than 70mm Shaft hole larger than 20mmThickness less than 30mm&nbsp;&nbsp;一种能够轻松安装，无需紧固件的3D打印焊锡丝支架。采用极简的外观设计.适用于以下尺寸盘直径小于70mm轴孔大于20mm盘厚度小于30mm。&nbsp;

Solder Stand

Soldering 

SuperiorOrganiserSolutions

LED Light Box with Leed United FC Logo&nbsp;Design can be wall hung or sat on a surface, 5mm hole for power cable.&nbsp;Model has been printed and tested.&nbsp;LED Light Strip: <a target="_blank" href="https://amzn.to/3Sc05Ch" rel="nofollow noopener">https://amzn.to/3Sc05Ch</a>Dimmer Cables: <a target="_blank" href="https://amzn.to/3RC9xx4" rel="nofollow noopener">https://amzn.to/3RC9xx4</a>

LUFC Leeds United Emblem LED Light Box Lamp

Leeds

christofer.jh

Finally, no more placing the golf ball on the tee manually like a peasant! Load the machine with up to 12 golf balls, use the golf club on the pedal and watch the ball be presented for you.&nbsp;You need:  <ul><li>5x3mm bolts + nuts</li><li>One rubber band</li><li>Golf balls</li><li>Some old coins for weight (about 113g)</li></ul>Some parts need support when printing, my print profile handles that for you.<h3>Build instructions</h3>By popular demand, I have added a step-by-step build instruction.&nbsp;Fastener nails/pinsFor your convenience I have included some nails/pins. The tolerance for these are tight, If you find them to big you can do the following:<ol><li>Scale them down and reprint (just the nails/pins)</li><li>Cut away from the top/edge/flange</li><li>NOT USE THEM, 3mm bolts work even better.</li></ol>&nbsp;I added a small hole where a stopper (provided nail or bolt) can be added so that the pedal don't go to far.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/727487/2024-02-11_3409d39da46cf.png"></figure><h2>Assembly:</h2>Exploded view<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/727487/2024-03-16_81b6cbc2f63e7.png"></figure>&nbsp;&nbsp;Build video here:<figure class="media"><div data-oembed-url="https://youtu.be/LWar123I0ZU"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/LWar123I0ZU" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Golf ball dispenser

Golf

Smarty

A Milwaukee battery holder which can be mounted onto any surface to holder your batteryThe battery holder has the notches in it so your battery clicks into place and will not fall outthere is enough clearance that you are able to mount it on any surface and enough so you don't have to mount it on the edge of you're table and you can mount it as far back as you likeDisclaimer: this is not a genuine Milwaukee product this is a version i have made myself and i am not selling it and it is a free product

milwaukee battery holder

18v tool accessories 

neythen.t

<h2>Summary</h2>This is a remix of DiilanDH's controller holder, but the system won't let me put it in. I improved the fit to the console and the controller so that it doesn't get knocked off so easily. I also have a version without the PS logo.Check out my insta for more projects: @neyth_makes <a target="_blank" href="https://instagram.com/neyth_makes" rel="nofollow noopener">https://instagram.com/neyth_makes</a><h2>Print Settings</h2>Rafts: No Supports: Yes&nbsp;Resolution: 200 Infill: 20&nbsp; Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=PolyMaker+PLA" rel="nofollow noopener">PolyMaker PLA</a>

Playstation 5 Controller Clip

Playstation 

Zurlingo-3D

An annoying gift card lock box, perfect for gifting store cards, vouchers, cash, Keys or anything else you can fit inside!&nbsp;Probably the fastest printable lock box on Makerworld!&nbsp;<figure class="image image_resized" style="width:37.36%;"><img src="https://makerworld.bblmw.com/makerworld/draft/299338/2023-12-22_46600b20d45a2.gif"></figure>&nbsp;Features:&nbsp;<ul><li>Prints in under 2 hours (2 colour)</li><li>14 cross head screws secure the box shut.</li><li>Screw driver hidden within the ribbon strips</li><li>No additional parts are needed for assembly.</li><li>Print in place hinged design</li><li>Satisfying to open and close</li><li>A fun way of giving the ‘annoying’ person in your life, more than just a generic gift card.</li><li>Perfect for Birthdays, Weddings, Christmas or any other occasion that involves giving gifts :)</li><li>The Box, Lid and Ribbon Strips are interchangeable with my ‘Fun Version’ (See my profile)</li></ul>&nbsp;Assembly/usage:After printing all parts-<ul><li>Insert your gift of choice into the smaller half of the box.</li><li>Close the box</li><li>Assemble the ribbon strips in the cross pattern</li><li>Poke the cross head screw driver through both holes in the ribbon strips and hold in place with your finger</li><li>Offer up the ribbon strips to the lid of the box and locate the screw driver into the threaded hole</li><li>Tighten the screw driver with the tips of your fingers until the ribbon strips are snug</li><li>Use the second screw driver to insert all 14 screws around the outside of the box making sure they're done up snugly.</li><li>The box is now impenetrable without the cross head screw driver! - The ‘victim’ has to find and unscrew this from the ribbon strips before being able to open the box….mwahaha</li></ul>&nbsp;Extra Info:<ul><li>The print profile for the A1 mini has the main box separated into 2 parts. This doesn't affect anything and the two parts can simply be pushed together at the hinge, after printing. This should be very obvious when you have the parts in your hands.</li></ul>&nbsp;Please post your makes and rate your experience :) It's very much appreciated :P

*Annoying* Gift Card Lock Box - Print In Under 2 Hours - Multi Colour No AMS

Random 

ddf3d.com

<div><h1>Summary</h1><div>Bubble Bubble Bubble makers <hr>provide 3 different type of bubble you can choose and make from it. It's works very well with bubble water made from dish soap mix with water by around 1:1. My daughter really like play with. Hope you will like it. Enjoy ;)</div></div>

Bubble Bubble Bubble makers

Ethan

SK07 Skipper07

I present to you the new and small version of the Christmas Toy Train, I hope your children will like it too.

Christmas Toy Train

Christmas 🌲

mcgybeer

Pumpkin Spinner!Print in place, easy and quick to print. A cool seasonal fidget to enjoy during Halloween.&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/1O0_qQfCCwk"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=1O0_qQfCCwk"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/1O0_qQfCCwk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;Tip: If you feel it too tight or too loose, or even if you want to scale them, you can play with the XY compensation in the slicer to get the right tolerances.&nbsp;Check here for <a target="_blank" href="https://www.mcgybeer.xyz/commercial-license" rel="nofollow noopener">Commercial License</a>

Pumpkin Spinner

Halloween 

jjjlee

My take on colour swatch chips and storage case. The swatches are designed for the label maker I have and I also wanted to make them as small as possible without losing details. Here are the basic parameters:<ul><li>50mm l x 40mm w x 3mm h</li><li>Stepped thickness scale showing 2mm, 1.5mm, 1mm, 0.4mm thicknesses mainly intended to show transparency of materials, especially translucent filaments.</li><li>The labels this is designed around are 14mm x 30mm (if you're intersted, I use one of these label printers: <a href="https://www.amazon.com/NIIMBOT-D11-Connection-Organization-Rechargeable/dp/B0B4W92J8V/ref=sr_1_1_sspa?crid=VXZPGT8DK324&keywords=niimbot%2Bd11&qid=1698943323&sprefix=niimbot%2Bd1%2Caps%2C247&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1" rel="nofollow">Niimbot D11 label printer on Amazon</a> or <a href="https://www.aliexpress.com/item/1005004369929267.html?spm=a2g0o.productlist.main.25.187a4c6aSwj7pp&algo_pvid=cbeb9c12-076d-4b63-b0df-fa66dd40c089" rel="nofollow">Aliexpress</a></li><li>Hole for attaching these to a keyring if you choose to store them this way</li></ul>There are 2 sizes for the box. One for 30 swatches, the other for 60. Both are print in place with no screws or pins required. They also shouldn't require supports but you could add them just under the lettering if your printer isn't tuned well for overhangs. Brims will be needed to keep the text in place.The only hardware that's needed are 8 Magnets, 6mm diameter x 2mm thick. A pause needs to be added to layer 108 (if you are using 0.2mm layer heights) or at 21.6mm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/201210/2023-11-25_ml6v12xw3fln.jpg"></figure>Photos show case printed with 0.2mm layers height, 3 wall loops, 15% gyroid infill. I have not printed/tested the 60 version, but it's essentially exactly the same as the 30, just with 2 rows of slots. Renders show scale and proportions. Please do let me know if you run into any issues or have suggestions for improvement. I may do a version with threaded inserts and screws but as of right now, the print in place hinges seem pretty robust (as tested by a couple of 3 year olds).

Filament Sample Swatches & Case

A1 Accessories 

Asdfgasdfg

Be careful downloading prints called “Fast” etc, those might be faster but that's because of a weaker design, they are spammers just taking the original profile, lowering the integral strength to get it to print faster, and as explained below, there needs to be a balance in the force of the spring and the rubber band. Those profiles might not work as well as intended. Its just spammers racing to the bottom, give them enough attention and soon there will only be profiles with 1 wall and 2% infil thats printed in 5 minutes but falls together if you look at it long enough.&nbsp;Double action OTF fidget toy for the fidget toy design competition.&nbsp;All you need is plastic and a rubber band!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-13_2404c2f7a37e2.gif">&nbsp;If you like the idea but dislike the design bookmark the model and visit it after the competition is over and I will release all the source file so you can easily modify the body or blade/comb!&nbsp;<h2>Assembly instructions:</h2>NOTE: For the double action to work you need to have a balance between your rubber band and the springs holding the blade. You can use the strongest rubber band you can find and it wont really matter, but the switch will be harder to push. So you might want to try around with different rubber bands or different materials for the springs. If the switch is to hard for your liking, your rubber band is to strong. If the blade/comb does not fully extract or retract, your rubber band is to weak or your springs are to stiff.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=rN4wuBX-5q8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/rN4wuBX-5q8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;<h2>How it works:</h2><img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-18_6157ed5d0cf8b.png">