Georgi Zashev

SimonMakerForge

ModelThis is a sand pattern roller with interchangeable molds and configure it as you want, for all boys and girls wich like to play on sand!Additional molds will be added soon. If you have some request please let me know.&nbsp;It is composed by a main handle:<figure class="image image_resized" style="width: 30.23%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000484295/design/2024-06-02_b7de9dd872bb8.png"></figure>and at least by three molds named Start, Middle, End:<figure class="image image_resized" style="width: 20.3%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000484295/design/2024-06-02_add515038f0df.png"><figcaption>Start mold</figcaption></figure><figure class="image image_resized" style="width: 22.16%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000484295/design/2024-06-02_5924deb677414.png"><figcaption>Middle mold</figcaption></figure><figure class="image image_resized" style="width: 22.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000484295/design/2024-06-02_c594edc4097fe.png"><figcaption>End mold</figcaption></figure>You can stack them togheter, insert the handle and the roller will be ready for play on sand.&nbsp;If you like the model I will make many other molds to be added to the main model.&nbsp;Check also some other models designed by me for summer periods!<ul><li>Caddy-Tray for beach umbrella: <a target="_blank" href="https://makerworld.com/en/models/484562#profileId-396944" rel="nofollow noopener">https://makerworld.com/en/models/484562#profileId-396944</a> </li><li>Beach Towel Holder-PEG: <a target="_blank" href="https://makerworld.com/en/models/484289#profileId-396627" rel="nofollow noopener">https://makerworld.com/en/models/484289#profileId-396627</a></li></ul>Do not forget to give me a LIKE!&nbsp;

Roller Molder for Sand (modular roller molds)

Favorites

HJ_3D_

Water jet for a tubular pool to be fixed onto a bar (maximum bar diameter 60mm) and connected with a hose to the pump outlet. The hose used is the one provided with a classic hydraulic robot. The water inlet diameter is compatible with 35mm to 37.6mm.I am providing the necessary parts to connect the robot hose to the pump outlet of my Habitat et Jardin pool. I do not know if it is compatible with other pool brands (please let me know if it works with other pool brands).Printing recommendation: PETG &nbsp;Jet d'eau pour piscine tubulaire a fixé sur une barre (diamètre des barres 60mm maxi), a relié avec un tuyau sur la sortie de la pompe. Le tuyau utilisé est celui fourni avec un robot hydraulique classique. Le diamètre d'entrée d'eau est compatible de 35mm a 37.6mmJe mets a disposition avec les pièces pour brancher le tuyau du robot sur la sortie de la pompe de ma piscine (marque : habitat et jardin). Je ne connais pas la comptabilité avec les autres marques (n'hésitez pas a me faire un retour si cela fonctionne sur d'autres marques de piscine)Conseil impression : PETG En vidéo : <a target="_blank" href="https://www.tiktok.com/@jh_3d/video/7246440391099174171" rel="nofollow noopener">https://www.tiktok.com/@jh_3d/video/7246440391099174171</a>&nbsp;&nbsp;

Water jet for a tubular pool / Jet d'eau pour piscine tubulaire

pool

Gulsifer

This is a print in place Bambu Lab Duct for the X1C, P1P, P1S, and P1E.&nbsp;The supports are already added on the vent area and will need to be removed after printing. see photo posted<ul><li>A 3mf file has been provided painted and not panted version</li><li>total grams used for this print is 12.76</li><li>using standard setting for Bambu it will print in under 1h</li></ul>&nbsp;The model is scaled to ABS and ASA standards.<ul><li>it has been tested on a P1S and a X1C.</li></ul>this model requires (2) 4x2mm magnets if you want the base to magnetize to the existing shroud.&nbsp;please be aware that to install this you might have to gently remove some glue around the edge of the plastic. some shrouds and ducts are glued in place. also the two fasteners that hold the existing duct in place are meant to be reused on the new duct.&nbsp;Why this duct. it centralizes the air around the nozzle and dose not blow the air to one side like the original duct. it also improves the overall localized flow. It uses Laminar flow to make the air more stable as it gets to the cooling area.&nbsp;Special thanks to JoeMikeMakes for beta testing this on his X1C&nbsp;Please Note: I have added a new .stl version and updated the .3mf file with the Right magnet removed “Bambu G Duct Lidar Void UPDATE” for more clearance for the lidar camera and sensor on the X1C. This prevents the printer from giving a errors that the lidar is covered. I have created Built in support that will need to be removed on the lidar side.

Favorites

pool

Bambu

Hot wheels