Wishing I made the bigger one!

A bittt too snug, but great overall

The little button section wastes a tonnnn of filament, just be aware.. also, felt the overall thing should be ever so slightly larger - had to force it on to my P2S screen. I am thinking about making a file of a cover that goes with this, where there’s maybe an option to have a cutout where it just shows bottom bar when printing.

Printed perfectly in PETG - selected the default PETG Bambu provided filament profile on the Bambu Handy app. Printed the ‘Regular’ size. Used the supplied screws and metal scraper part.

Super slick, does attract a lot of fuzz from your pockets because of the fine detail on it but otherwise great.

Fits well, no complaints!

created a handful of different colored records - did have a couple hiccups printing some records but overall good. make sure to use petg if going to get wet/have hot things on them, not PLA. do wish I made it larger as here you can’t actually see but my coffee mug is too large… fits cans fine.

plate 3 super rough where you have to pull the supports off, because of this it is uneven when putting the two pieces together. had to sand down and add super glue

Works great, just be sure to move your glass plate as far to the side as you can (my newer p2s doesn’t have as much clearance).

WARNING for those printing in PETG! This profile will not work by default as it’s for PLA (see first picture for attempt 1). In the app, choose to use your filament presets, and use the Generic PETG filament option, resulting in attempt two in the second picture. Slide came off the plate a bit bent up but once put together isn’t noticeable. Love the translucent as you can see the pills (and translucent is just sweet anyways). Printed the case in matte black Inland PLA, the text in matte blue Overture PLA, and the inside/slide in Translucent Elegoo PETG.