GeekGearHead

Tonny

Simple model for D&D lovers.No supports needed for print.It´s basicly same as the second model on my profile. After doing my research cans in USA are same width but just smaller then in EU. So this model has higher bottom.

D&D can holder and dice roller USA version

Dice Towers

Golub17

Simple spool roller suitable for hopefully all spools up to 1kg. Wheels have a V-shaped groove to both keep them moving with the spool and keep the spool centered in them. They are also designed to be print in place, give them a few hits to start them moving. Print profile has random seams for better “unstickability” of print in place bearings.&nbsp;Stand has compliant holes and pegs, they should fit together (from my build and testing) and hold. If that will not happen to you, I suggest using a drop of superglue. Spacers are optional, but using them will guarantee a good placement of the spool every time inside tight spaces of the dry box. I personally recommend using PLA for the Stand and Spacers while using PETG for the Wheels. But from my testing, PLA Wheels also work well enough, so you can also use PLA for the whole print. Simple Dry Box Inlet: <a target="_blank" href="https://makerworld.com/en/models/501070#profileId-416128" rel="nofollow noopener">https://makerworld.com/en/models/501070#profileId-416128</a> inlet on the third picture is my old custom one, new design in the link Collection of My Accessories for 3D Printers: <a target="_blank" href="https://makerworld.com/@golub17/collections/1575941" rel="nofollow noopener">https://makerworld.com/@golub17/collections/1575941</a> Notes: Compared to the old model <a target="_blank" href="https://makerworld.com/en/models/155432#profileId-170131" rel="nofollow noopener">https://makerworld.com/en/models/155432#profileId-170131</a> there have been following upgrades: - braces on the front of holder to brace against the drybox wall - better and bigger wheels with better tolerances - optional spacer to fix the roller for 1kg sized spools

Spool Roller for Drybox

3D Printing

babodad

Lorcana Tokens by AP_Design. Set layers for multicolor print and seperated the tokens on two different print plates.

Disney Lorcana Tokens

Lorcana

Elegant Marble Machines

<h2>Summary</h2>Introducing Apex—an entrancing 3D printed marble machine. Watch the marbles carefully as the spiral lifts them up, and they weave down a plinko board, stairs, and various other tracks.&nbsp;The machine uses 8mm or 5/16&#34; marbles (the distinction is negligible), but can be scaled up proportionally to use larger marbles.Video: <a target="_blank" href="https://www.youtube.com/watch?v=76Xtjbtv-K8" rel="nofollow noopener">https://www.youtube.com/watch?v=76Xtjbtv-K8</a>&nbsp;If you like marble machines, check out some of my other work! <a target="_blank" href="https://elegantmachines.etsy.com" rel="nofollow noopener">https://elegantmachines.etsy.com</a>&nbsp;Dimensions: -Length: 6.75&#34; (170mm) -Width: 5.75&#34; (150mm) -Height: 5.5&#34; (140mm)&nbsp;*Please ensure ball bearings are out of reach for children under 5, as they present a potential choking hazard. <h2>Print settings</h2>No supports are required for any of the four main files (everything except the crank). A layer height of around 0.16mm (or 0.2mm) is recommended, at least for the main machine. A printer bed size of at least 170mm x 170mm X 140mm is needed. The crank is another, optional, way to spin the marble machine, and does require supports to print.<h2>The story</h2>I designed this machine over the summer of 2023. Surprisingly, the failure rate (number of marbles that fell out or jammed / number of marbles cycled) was only 0.4% for the first version of the design--not bad! I raised a few walls, added a few supports, and made the track steeper in a few places; the second iteration had a much better failure rate of 0.06%. Still, that wasn&#39;t up to my standards (below 0.02%). Fortunately, the third version did meet standards; it had no failures after cycling 20,000 marbles. Still, I didn&#39;t stop there. Since then, I&#39;ve optimized the design further, cutting out unnecessary supports, reducing filament usage, and reinforcing various sections. As of December 2023, I&#39;m on the eighth version of this design, and I still have ideas for micro-optimizing it.<h2> </h2>

Apex - Marble Machine

Marble Runs

Waffles

Space Marine Drop Pods for Warhammer 40k tabletop games.Minimum size od 2cm height, can be scaled up as much as you want.

Drop Pod Space Marine Warhammer

WH40K

sipura

Hello,UPDATE 26/1/2024:You can check you our new model, same like this one but XL bigger. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/157759#profileId-173134" rel="nofollow noopener">https://makerworld.com/en/models/157759#profileId-173134</a> &nbsp;&nbsp;UPDATE 19/1/2024:You can check you our new model, same like this one but smaller. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/146935#profileId-160286" rel="nofollow noopener">https://makerworld.com/en/models/146935#profileId-160286</a> &nbsp;My new model of the utility case.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x303pcs of screws M3x18&nbsp;Dimensions are in mm:&nbsp;<figure class="image image_resized" style="width:65.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_e25480cf53e6d.png"></figure><figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_97292542d7a98.png"></figure>NEW:&nbsp;Now we made V2 model that has thicker hinges on each side by 1mm behind, and wall loops with 3pcs. For this model, instead of 3pcs M3x18mm screws, you now need 3pcs M3x20mm.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-01-13_6bc78c7c28bab.jpeg"></figure>&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing and using this useful case.

Utility OG case

Storage Boxes

Josh-3D

Check out the other two games in the series<a target="_blank" href="https://makerworld.com/en/models/140755#profileId-153348" rel="nofollow noopener">Checkers</a><a target="_blank" href="https://makerworld.com/en/models/134530#profileId-145997" rel="nofollow noopener">Chess</a>&nbsp;[Update] After getting some feedback, I adjusted the print profile, so the color change isn&#39;t discharged into the infill. I also increased the bottom shell layers. Since the main color scheme of this is white/black/green, it makes sense to reinforce those settings to avoid color bleed. Also added an A1 Mini plate for the Mini users!&nbsp;[Update 2!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/840057458" rel="nofollow noopener">Wcad00 </a>for the added clip![Update 3!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/982974221" rel="nofollow noopener">SoftWareCrash </a>and <a target="_blank" href="https://makerworld.com/en/u/425227684" rel="nofollow noopener">Adminstrator</a> for their contributions. The “Pocket” version, a 50% scaled version, and for a set of Xs and Os, with the Xs cut to fit inside the Os.&nbsp;A Travel TicTacToe game, for those long spans stuck at sea, where you don&#39;t want to risk using a pencil on the side of your life raft! Or uh, you know, any other occasion too, like road trips down the coast with friends, or spending family time playing games!&nbsp;Player piece quantity is setup so that X goes first!&nbsp;The clearance is tight. The X and Os should fit fine, but if your printer is sloppy, it might be a tight fit.&nbsp;&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.&nbsp;&nbsp;

TicTacToe - Travel Edition

Games

3DLion

Introducing the Pallet Town-inspired Pokemon Card Box, crafted for the 'Landmark' contest.<figure class="image image_resized" style="width:42.34%;"><img src="https://makerworld.bblmw.com/makerworld/draft/736503/2024-03-19_0b2f3cb24dad1.png"></figure>This model offers three versions:Multicolor - Big Pokemon Card Box:<ul><li>Accommodates approximately 1500 cards.</li><li>Customizable dividers for personalized organization.</li></ul><figure class="image image_resized" style="width:39.87%;"><img src="https://makerworld.bblmw.com/makerworld/draft/736503/2024-03-19_5b399b28a0d18.jpg"></figure>Single Color - Big Pokemon Card Box:<ul><li>Holds around 1500 cards.</li><li>Features customizable dividers for tailored sorting.</li></ul>Single Color - Small Pokemon Card Box:<ul><li>Ideal for versatile storage without dividers.</li></ul><figure class="image image_resized" style="width:41.61%;"><img src="https://makerworld.bblmw.com/makerworld/draft/736503/2024-03-19_650f113831ba9.jpg"></figure>Colors Used:<ul><li>Blue: Bambu PLA Basic, Blue 10601</li><li>Red: Bambu PLA Basic, Red 10200</li><li>Green: Bambu PLA Basic, Mistletoe Green 10502 (Lighter shade recommended)</li><li>Gray: Bambu PLA Matte, Ash Grey 11102</li><li>White: Bambu PLA Basic, Jade White 10100</li><li>Yellow: Random Gold Filament (Dark yellow Bambu PLA Basic suggested)</li><li>Black: Bambu PLA Matte, Charcoal 11101</li></ul>Assembly:<ul><li>Utilizes hinges from e&h Design </li></ul><a target="_blank" href="https://makerworld.com/en/models/219322#profileId-254979" rel="nofollow noopener">https://makerworld.com/en/models/219322#profileId-254979</a><ul><li>Secure hinges to the top lid using superglue, avoiding contact with moving parts.</li></ul><figure class="image image_resized" style="width:61.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/736503/2024-03-19_12a945faf3cde.png"></figure><ul><li>Important: Glue hinges to the top lid first, then attach the lid with hinges to the box.</li></ul>Enjoy the printing process and have fun!&nbsp;

Pokemon Card Box (1500 cards) - Pallet Town art

Random

Sutcliffe.designs

The original version had the dice graphic part of the lid debossed into the lid. I modified it so the logo is flush with the lid

DiceCase with remixed Screw Top Lid. Flush Logo

dice holders

thatcaddad

I designed a deck box to fit 100 sleeved standard cards and 2 20 sided dice. you will need magnets to join the top and bottom parts. This is designed to be supportless with some bridging required for the bottom and top of the deck cavity. If you want a cleaner finish you can add supports but it will take longer. The magnets you will need are 15mmx2mm magnet. They are the cylindrical kind. Please post a make if you make this! The inside space for cards is 100mmX70mmX70mm. Happy Printing. Update: I tweaked the bottom deck cavity to print better when being bridged. I have also added a decorative file if you would like to resin print just to have a physical top that has no function except for decoration purposes. Also I have included a stand. Its not the prettiest thing but definitely works to hold it which is nice because it was just sort of laying around before I had this.Here are the magnets that should fit. <a target="_blank" href="https://www.amazon.com/VSKIZ-Different-Muti-use-Neodymium-Whiteboard/dp/B0BZYNZQKS/ref=sr_1_1_sspa?crid=OUWZE6DUFQIU&keywords=15mmx2mm%2Bneodymium%2Bmagnets&qid=1692371129&s=industrial&sprefix=15mmx2mm%2Cindustrial%2C107&sr=1-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1" rel="nofollow noopener">amazon.com/VSKIZ-Different-Muti-use-Neodymium-Whiteboard/dp/B0BZYNZQKS/ref=sr_1_1_sspa?crid=OUWZE6DUFQIU&keywords=15mmx2mm+neodymium+magnets&qid=1692371129&s=industrial&sprefix=15mmx2mm,industrial,107&sr=1-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1</a>&nbsp;If you want to support me try this screw on version of this model. https://www.printables.com/model/736619-mtg-deck-box-sensei-divining-top-100-single-sleeve