Ein sehr schöner Halter für meine Lichtschwerter! Passt hervorragend, sieht super aus und ist wirklich toll zu drucken. Echt klasse!

Danke für den Schriftzug. Mein bester Freund hat sich sehr drüber gefreut!

Genialer kleiner Helfer! Wirklich super! Ich hab's mit PETG gedruckt von Sunlu und es sieht super aus! Das sind genau diese kleinen, coolen Helfer, die einem das Leben wirklich erleichtern! Ich hab mehrfach versucht und mich extra dumm angestellt, die Druckplatte falsch oder schief einzulegen. Keine Chance! DANKE DANKE DANKE!

Love the box. atm I am printing the linked inserts. Really cool box. Appreciate the work :)

Great holders! Now I can finally place the minifigures properly! The figures themselves stand firmly on the studs, and the accessories (in this case, the trophies) are held securely in place. Nothing can fall over. Printing was very simple. I was actually able to fit 32 of the 2x2 studs onto a print plate of my P1S. Really good! Highly recommended! They don't take up much space and are easy to attach! And if you want to swap something, you can leave the holder in place and just swap the stud plate! Great design!

The parts are great! Quickly printed with the P1S and absolutely fantastic! Nice and tight (it takes a little pressure to insert the neon rope light) and looks really great! I used the 10 cm parts to get more support and prevent sagging! Before, long stretches in particular looked impossible. Like I wanted to, but couldn't. Now it looks great! Really good and useful! Oh, I used it with the Rope Light 1, which is no longer available from Govee. But it also works wonderfully with the Neon Rope Light 2! Since it is narrower, the holder fits even better here!

this is an awesome project! i printed it on my p1s without any problems! really nice! as a big Raiders Fan it‘s a MUST HAVE for my collection! awesome work! RAAAAAAAIIIIIIIIIDDDDEEEEEEEEERRRRRSSSS

Really easy to print (Used a P1S) and had no problems! I printed the updated version and used exact the same LED stripe as mentioned in the description. Nice work! A version with a USB-C Cable would be cool!

Really good! I tried for a long time to attach my lights to the monitor with double-sided tape to achieve “indirect” lighting behind the monitors. With the desk mounts, it's now much, much better. Really cool. Printed from PETG with the P1S for a good hold, it's a really cool solution! Sticks really well to my IKEA UPPSPEL gaming desk!

Deadpool has gotten his due. I printed the base out of PLA, and the tube that the helmet rests on is made of PETG, including the screws. Great holder, really good! I've already printed several of them and am looking forward to more cool styles!

A really good storage system! I like the shallow drawers! It would be great if there was a way to connect the boxes both horizontally and vertically! Unfortunately, that's still missing, but otherwise, these are great drawers in terms of both depth and width! Love it! Printed it with a P1S. Filament was used SunLu PLA Black and BambuLab PLA Silver

Tolles Modell. Die Buchstabendeckel erforderten etwas Nachbearbeitung und den unteren Deckel des Mund habe ich mit 50% Geschwindigkeit gedruckt und die Lüfter des Drucker alle um 20% herunter gedreht! Die Positionierungshilfe für die "Tiefe" der Buchstaben ist klasse. Kleiner Tipp von mir: In die "Löcher" passen die Stäbchen von Wattestäbchen. Die habe ich für die korrekte Positionierung der Buchstaben auf der Halterung genutzt! Klasse Modell für jeden AIDA-Fan. Ich habe den LED-Streifen weggelassen und die Deckel in den jeweiligen Farben gedruckt und festgeklebt. Sieht auch toll aus.

RAIDERS 4 LIFE. Der Druck ging relativ schnell. Ich hab mit BambuLab PLA Basic Filament gedruckt. Schwarz, weiß und Silber. Die Oberfläche richtig schön glatt! Tolle Arbeit vom Ersteller! Richtig gut! Größe auch einwandfrei! Sollte sich jeder RAIDERS-Fan für Zuhause drucken...