Nice design, works great. Printed with a 0.6 nozzle, which could have been why I had to shave down the shafts to get them to press fit correctly into the gears. The holes on the attachment shown are too big for the include screws, so I'll gave to scale up the screw diameter or something to get them to work Update: Scaled up the screws 5% and now they work pretty well in the attachment.

Looks nice. Works ok. Had to reprint the wall hook part as it came off the build plate when printed together. Makes me question the choice of print orientation.

A much better size in my opinion.

Printed well in PETG, though supports were on on the roller and were a pain to remove. Bearings snapped right in, and it works well.

Printed well in PETG. I did print the gasket in TPU for AMS, but I'm not sure it does much.

It printed well in PETG, with the gasket being printed in TPU for AMS. All the parts fit with almost no fuss. I did end up gluing the front bit together, as it was pretty loose, but everything else I left alone. The glass lid feels well seated, and stores great above. I forgot to cut the LED strip before installing, so it hangs out the back, but it works great. I got a USB powered LED strip, and plugged it into a smart plug for remote control. Is much easier to see inside now. I also printed a spool holder, side box and an additional drawer with spots for nozzles, and I think I'll print a peg board for the other side.

Works well in PETG