Prints very well with no waste filament whatsoever (ie. supports and sticker padding etc). Fits splendidly on both The Army Painter's speedpaint Gen 1 & 2, as well as all Warpaints and Fanatic product lines etc. Additionally, fits Vallejo acrylic bottles as well. Prints excellent with stock 0.4mm nozzle head. These are excellent, and I hope the designer continues to create more designs of these types of toppers/swatches!!

Printed very well. The supports were easy to break off and didn't leave behind any tanglers or damage.

The gearing that operates the bed angle, is not required beyond 180°. Removing those gearing protrusions will likely reduce both print time and material consumption. Love this little gadget and it nevertheless works great!

I absolutely love these little prints! You can achieve nearly seamless layers with a 4mm nozzle!

Perhaps an integrated flip-downwards, screen protector would be a nice addition too.

Great design. I did notice that when the A1 is ejecting PLA, that the pieces can sometimes stick to the wall of the deflector, and then fuse to it as the material cools. So I used my finger to lightly smear some Vaseline to the inside wall of the deflector, and that seemed to have resolved the issue. Hope this helps folks!