FullMetalUschi

Mr.P.

Ich habe einen Bahnhof entworfen, der vollständig ohne Support gedruckt werden kann. Er besteht aus mehreren Teilen, die zusammengesteckt werden können. Ihr könnt zwischen zwei Fahrplan-Versionen wählen, wobei eine mit Hueforge erstellt wurde. Das Beschriftungsschild wurde direkt im Bambu Studio beschriftet und kann nach Belieben geändert werden. Sowohl das Schild als auch der Fahrplan können jederzeit ausgetauscht werden. Ich hoffe, sowohl ihr als auch eure Kinder haben viel Freude daran!&nbsp;Beschriftung ändern&nbsp;Um die Beschriftung zu ändern, klicken Sie im Bambu Studio auf das Element, dann mit der rechten Maustaste auf text_shape und wählen Sie 'Ändern'.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/760624/2024-03-26_1265be891aefd.png" alt="Ein Bild, das Text, Software, Schrift, Computersymbol enthält.Automatisch generierte Beschreibung">&nbsp;Druck Reihenfolge:Die erste Platte habe ich mit dunkelgrau, Marmor, Weiß und Gelb gedruckt.Die zweite Platte wurde ebenfalls mit Marmor gedruckt.Bei der dritten Platte habe ich gelb und dunkelgrau gegen zwei braun Töne getauscht.Die vierte und fünfte Platte wurde mit rot/blau/grün und weiß gefertigt.Bei der letzten Platte habe ich rot und grün durch schwarz und Silber (Silk) gedruckt.&nbsp;Zusammenbau:Alle Teile lassen sich relativ einfach zusammenstecken, beim Türrahmen ist zu beachten das er zuerst über die Stufen geschoben werden muss.&nbsp;&nbsp;&nbsp;I have designed a train station that can be fully printed without supports. It consists of multiple parts that can be assembled together. You can choose between two timetable versions, with one created using Hueforge. The signage was directly labeled in Bambu Studio and can be changed as desired. Both the sign and the timetable can be replaced at any time. I hope you and your children have a lot of fun with it!&nbsp;Changing the Label:To change the label, click on the part in Bambu Studio, then right-click on text_shape and select “change”.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/760624/2024-03-26_0cd577309ec2e.png" alt="Ein Bild, das Text, Software, Schrift, Computersymbol enthält.Automatisch generierte Beschreibung">&nbsp;Printing Sequence:The first plate was printed using dark gray, marble, white, and yellow.The second plate was also printed using marble.For the third plate, yellow and dark gray were replaced with two shades of brown.The fourth and fifth plates were made with red/blue/green and white.For the last plate, red and green were replaced with black and silver (silk).&nbsp;Assembly: All parts can be relatively easily assembled. When assembling the door frame, it's important to note that it should be slid over the steps first.&nbsp;

Train Station 

Holzeisenbahn

Faran3D

A great addition to any Borderlands Collection, this storage box has many of the details from the Ammo Box in game and Hyperion logos engraved on both sides. It features a five part hinge and 6mm x 3mm magnet holes to make it open and close smoothly and stays closed.&nbsp;AMS 4 Color profile with white screen, AMS 5 color with green screen and Single color profile for those wanting to paint.&nbsp;If you'd like to buy me a coffee to support this and future projects, I'd really appreciate it!  https://www.buymeacoffee.com/faran3d

Borderlands Hyperion Ammo Crate with Hinge and Magnets

Borderlands

krisgroves2010

These are simple brackets that use the existing bolt holes that came on my fysetc voron 2.4 build plate that will align your removable plate in place for you. Printed from abs.

Voron 2.4 build plate alignment brackets

Voron 2.4

TheMakerSphere

If you like this model and it's not too much trouble, please hit the 👍 button - it helps out a lot 😀&nbsp;This is an EDH/Commander tray. If you want something a bit smaller, check out the <a target="_blank" href="https://makerworld.com/en/models/194042" rel="nofollow noopener">Compact Commander Tray</a>!This EDH tray can hold the following:<ul><li>1x Commander card</li><li>5x d20</li><li>2x 16mm d6 (regular sized die)</li><li>3x 12mm d6 (mini, Pokemon style die)</li><li>1x life counter</li></ul>The life counter space is made specifically for this printable life counter (2 wheel version): <a target="_blank" href="https://www.thingiverse.com/thing:4967362" rel="nofollow noopener">https://www.thingiverse.com/thing:4967362</a>.&nbsp;Checkout my <a target="_blank" href="https://www.themakersphere.com/mtg-3d-print-projects/" rel="nofollow noopener">MTG 3D Print Projects</a> page if you are interested in even more MTG prints like this from myself and other very talented makers!

MTG Commander / EDH Tray

FlugtN

Very simple toothbrush travel case. Print time is only 1 hour and the material usage is low.&nbsp;The parts can be printed in different colors to customize the visual style of the case.&nbsp;Fitment:The fit between the two parts may depend on your specific printer or the filament used. If the tolerance between the two parts are off, try scaling one of the parts a fraction of a percent. This may help ;)&nbsp;Post-processing:As the parts needs brims, you have to spend 30 seconds cleaning the edges with a knife or deburring tool. Otherwise the parts won't fit together properly. This is however really easy. &nbsp;Fun-fact:You may notice your printer playing some “music” while printing as the air from the cooling fan blows into the tubes, making some weird tones :)&nbsp;&nbsp;

Toothbrush travel case

Badezimmer

AU3D

This remix enhances the original T-Clip mounting system by replacing it with fixed, custom-designed hooks that offer minimal tolerances for an extra secure fit. Additionally, I’ve created a minimal version featuring just two hooks, which reduces material usage by 40% (10g compared to the original 17g).<h3>Skadis Collection</h3>I am constantly developing more IKEA Skadis attachments. Check out my<ul><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/453266" rel="nofollow noopener">IKEA Skadis Shelves, Trays and Container</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">General IKEA Skadis Collection</a></li></ul>

Scissors, Pliers, Tools Holder for IKEA Skadis

Werkstatt

Hexagon64

Corner guides for Ender 3 S1/Pro to make it easier to put the build plate on.<figure class="media"></figure>This is my own design for a build plate guides for the Ender 3 S1/Pro. You only need 2x M3 threaded inserts (i used the ones from 3DJake) and the original screws.For the right corner i used double sided tape to stick it under the printbed.I used PCTG to print it, but PETG shoud be enough heat ressistent.&nbsp;I hope you like the model.&nbsp;You need:<ul><li>2x M3 threaded inserts</li><li>Double sided tape or VHB tape</li></ul>

Build plate guide for Ender 3 S1/Pro

Ender 3 S1 Pro

Mici

Based on DUMMY 13 Beta - Oct. 2023 <figure class="table"><table><tbody><tr><td><a target="_blank" href="https://www.printables.com/model/593185-dummy-13-printable-jointed-figure-beta-files" rel="nofollow noopener">DUMMY 13 Printable Jointed Figure </a>© 2023 by <a target="_blank" href="https://www.lucky13toys.com/" rel="nofollow noopener">Lucky 13 Toys </a>is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY 4.0</a></td></tr></tbody></table></figure><ul><li>Remixed some armor and frame parts</li></ul>&nbsp;&nbsp;&nbsp;It&#39;s no secret that DUMMY 13 can also be printed &gt;100%, but what if you want it to be smaller? Simply scaling is not an option, that&#39;s clear. So I came up with a concept where DUMMY is only about 10cm tall and still remains compatible with most add-ons.&nbsp;Assembly:<figure class="table"><table><tbody><tr><td style="width:50%;">The parts that need to be replaced are marked in green in the picture.*Remove the runners from the frame parts first!</td><td style="width:25%;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187950/design/1b3aeda1-11ba-4e89-a429-3aa687fbc3c4.webp"></figure></td></tr></tbody></table></figure>You can also see in the pictures:<figure class="table"><table><tbody><tr><td style="width:50%;">Parts from <a target="_blank" href="https://makerworld.com/en/models/187954" rel="nofollow noopener">DUMMY 13 goes to COMIC CON - Fetishpool/Kidpool/Diaperpool?</a></td><td style="width:25%;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187950/design/21f3db8f-c360-488e-abc4-e414cc5ecea4.webp"></figure></td></tr><tr><td><a target="_blank" href="https://makerworld.com/en/models/174897" rel="nofollow noopener">DUMMY 13 - Acrobatics pedestal - Pose stand</a></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187950/design/43306f9a-3b47-42bc-bf95-29fbae89aac5.webp"></figure></td></tr><tr><td><a target="_blank" href="https://makerworld.com/en/models/174749" rel="nofollow noopener">DUMMY 13 goes to COMIC CON - Deadpool</a></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187950/design/06b4f420-a40f-4c6e-878d-ac9685ba91ba.png"></figure></td></tr></tbody></table></figure>&nbsp;Have fun.

DUMMY 13 - Mini-Me aka "DUMMY 10" - V0.3 Beta 

Dummy 13

Kubikossi

Fanart for Hueforge(the picture shows the printed result)&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA BambuLab Basic Black PLA Jayo Grau matt  PLA BambuLab Basic Gray PLA BambuLab Basic Jade White&nbsp;Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Grau matt At layer #16 (1.36mm) swap to Gray At layer #19 (1.6mm) swap to Jade White for the rest.

Fanart Hueforge

Hueforge

Gerooh

Basic Bowden tube guiding system designed for filament feeding from the left side of the Creality K1/K1C printer.Required components:<ul><li>2 pieces of M3x8mm screws (4 if u have K1)</li><li>2 Quick Fitting Connectors (M6/M10)</li></ul>Reuse the two tiny black screws that were originally in place (substituted with M3x8 screws to secure “Corner.stl”).Use them to fasten the "BackClip_K1C.stl" securely in position.&nbsp;I own K1C, K1 does not have same holes of K1C so i designed “BackClip_K1.stl”. It is designed to fit in the same but opposite spot as “Corner.stl” (2 more of M3x8mm screws are needed)

Creality K1/K1C Left Side Filament Tube Guide System

Hiro Koiso Racing

This model is designed to fit X1 and P1 series printers. HKR poop chute features interlocking leg to secure the chute to the printer body without extra hardware or magnets. ※Fitment Note: If you got X1, X1C and P1P in Feb 2023 and earlier (most likely built in 2022) , Your printer might have shorter legs than current version. This can cause a printer to not sit level with the chute installed. How to tell if you have a early style short leg printer<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-05_177ad051bd84f.jpg"><figcaption>Print The chute and see if the round part of base can slid under the printer as pictured. If it goes like picture above, you have current style. no further action is required. If the chute base doesn't goes in, follow instructions. Scroll down for further information</figcaption></figure> <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-02_0f1d75fb4cc6e.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-02_8219b55930c54.gif"><figcaption>Easy printing - It prints without support.</figcaption></figure>Removable bucket are easily access from front and available in 4 sizes.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-02_52e2e363fc345.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-02_ec5da20ffb566.gif"></figure> <img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-02_7002ac682aaca.jpg"> 《Solutions for early short leg printers clearance issue 》 2 ways for fix - both methods raise the printer height to same as current version to correct clearance issue. So print whichever you prefer and install to an early style printer. (Files are available for download)<ol><li>Replacement TPU leg - Extended legs replace stock rubber feet. Print with TPU <img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-05_ab7611200d584.jpg"> <img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-05_5d39951f13735.gif"> </li><li>PLA spacers - PLA or whatever rigid filament material you used to print the chute would work. They fit inside the leg pockets, use with stock Rubber feet <img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-05_ac0d4c15d6753.jpg"> <img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-05_e325c22380ea.gif"> </li></ol>Tip for leg replacement:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-05_828fd7817fbe4.jpg"><figcaption>Bring a leg to the edge one by one to replace. So you don't have to lay printer on side.</figcaption></figure>&nbsp;&nbsp;Checkout more HKR printer accessories: <a target="_blank" href="https://makerworld.com/en/u/2567436854" rel="nofollow noopener">https://makerworld.com/en/u/2567436854</a>&nbsp;・HKR Stackable Build Plate Storage: <a target="_blank" href="https://makerworld.com/en/models/120963#profileId-130105" rel="nofollow noopener">https://makerworld.com/en/models/120963#profileId-130105</a><a target="_blank" href="https://makerworld.com/en/models/120963#profileId-130105" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-02_1f77d220d2196.jpg"></a>&nbsp;・Foldable AMS side mount spool holder - No Bearing: <a target="_blank" href="https://makerworld.com/en/models/145321#profileId-158083" rel="nofollow noopener">https://makerworld.com/en/models/145321#profileId-158083</a> <a target="_blank" href="https://makerworld.com/en/models/145321#profileId-158083" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-02_119fd552797b3.jpg"></a>&nbsp;・Foldable AMS side mount spool holder - with Bearings: <a target="_blank" href="https://makerworld.com/en/models/153090#profileId-167255" rel="nofollow noopener">https://makerworld.com/en/models/153090#profileId-167255</a><a target="_blank" href="https://makerworld.com/en/models/153090#profileId-167255" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/666492/2024-03-02_25f94a5385d15.jpg"></a>&nbsp;Happy printing!

HKR Interlocking Poop chute with removable bucket

Printer Upgrades

FloydS

I didn't like the push-fit design of other mini filament spool swatch designs, so I created my own design using 3D printed threads. The filament roll fits snugly onto the spool and is very nicely secured by screwing together the two spool sides.&nbsp;The threads withstand a good amount of torque, enough to perfectly hold the filament roll in the middle.I used a thermal printer to add 13x7mm labels describing what filament was used to print the mini spool.&nbsp;In the print profile, you will find one plate for 4 different colored filament rolls and 10 spools, together with the rack shown in the pictures.

Mini Filament Spool Swatches

Filament Samples

DorAndy

Here is my first designed game - inspired from an old TV-show: Save the last Unicorn!&nbsp;How to play:<ul><li>take the wand and hammer min. one stone out of the game</li><li>give the wand to the next player</li><li>if the Unicorn falls down you lose =(</li></ul>Here you can find a short gameplay: <a target="_blank" href="https://youtu.be/Nk5TLTX8QNQ" rel="nofollow noopener">https://youtu.be/Nk5TLTX8QNQ</a>&nbsp;What do I need to print?1 x Wand 1 x Frame 4 x Leg min. 36 x Stone (try the fit with your printer with 6 stones and if it fits print the rest or scale them a bit) 1 x Unicorn 1 x Unicorn-Stone Let me know if you got any questions or problems with the design! (its quite old - so could be that the tolerances are a bit too lose)Happy gaming and check out my other designs too!

Save the last Unicorn

Melek

BENOengineering

Protect your beer with this can cover against wasps, bugs and other co-drinking persons :)The bottom snaps onto the top of a 0,5L - 0,33L (short) - 0,33L (long) can. If you want it to work with a 0,25L can, scale both parts to 0.96.Easiest way to assemble is by gently squeezing together the circle of the bottom part and slide the top into the hinge-part.&nbsp;Check out the alphabet-version as well:<a target="_blank" href="https://makerworld.com/en/models/458456" rel="nofollow noopener">https://makerworld.com/en/models/458456</a>&nbsp;Commercial license you can get here:https://buymeacoffee.com/benoengineering/e/265720

Beer protector

Nadine

Sakul

Revolutionize your workspace with these Brick Stackable Desk Boxes – where playfulness meets productivity! 🧱✨ Unleash your creativity and tidy up your desk simultaneously with these 5:1 Brick brick-inspired organizers. Available in 2x2 and 2x4 sizes, each Box comes complete with a built-in drawer for seamless storage of your office essentials. These bricks are not only five times the size of regular clamping Bricks but are also stackable, just like the iconic building blocks.Mix and match to create your personalized desk masterpiece! Elevate your organizational game and bring a touch of childhood nostalgia to your workspace. The Brick Stackable Desk Boxes – because work can be both efficient and fun!  If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>&nbsp;&nbsp;Check out my newest Uploads <figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-06-04_fa3ccc46fa531.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-05-01_5c7d04a643a0d.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>