paw_control - A1Mini, 3 plates multicolor

paw_control - 1 plate single color

paw_control - 2 plates multicolor

bar_end_bit 17mm inner/22mm outer

bar_end_bit 15mm inner/23mm outer

tuned settings with supports, 0.16mm layer

flip_door_stop two parts_0.16mm layer, 4 walls, 16% infill

0.16mm layer, tuned supports/brim for strong bed adhesion

one build plate, optimized fitment, clean print orientation

powder box, 0.2mm layer, 2 walls

pair of bleed blocks_0.2mm layer, 2 walls, 15% infill

small version_20-25cm, 0.2mm layer, 2 walls, 5% infill

large version_25-30cm, 0.2mm layer, 2 walls, 5% infill

print profile for diameter 18.8mm

all 4 charms_you can deselect charms before printing

0.12mm layer, 3 walls

scaled down to 90%, 0.12mm layer, 3 walls

0.2mm layer, 2 walls, different infills for body and lid

two versions of 45 degree angled connectors

large version_0.2mm layer, 2 walls, 4% infill