Frankzilla

The Big Greek

<h2>Introducing the Q-FOB: QR CODE-NFC TAG-FIDGET-SPINNER-FOB</h2>Hello everyone,I would like to introduce you to a new project today: the QR CODE-NFC TAG-FIDGET-SPINNER-FOB, or Q-FOB(Tebimaor-FOB) for short.&nbsp;Many of you are probably already familiar with fidget spinners, key fobs with QR codes or key fobs with NFC chips. The Q-FOB(Tebimaor-FOB)  combines all these functions in a stylish and customisable design.&nbsp;What is the Q-FOB?The Q-FOB is a 3D-printed key fob that is equipped with a QR code and an NFC tag.&nbsp;What can the Q-FOB do?- QR code: The QR code can link to any website, social network profile or other information.- NFC tag: The NFC tag can be used to store contact information, URLs or other data.- Fidget spinner: The Q-FOB is also a fidget spinner that you can use to play and relieve stress.&nbsp;How can I configure the Q-FOB?&nbsp;<h3>The Q-FOB is fully configurable with 34 settings. You can choose the QR code, the space for an NFC tag and the design of the fidget spinner yourself.</h3>Thank youI would like to take this opportunity to thank <a target="_blank" href="https://makerworld.com/en/@MalcTheOracle" rel="nofollow noopener">MalcTheOracle</a> once again, who actively supported me in the development of the Q-FOB. Don’t forget to visit his site. Like and Download his nice Designs.&nbsp;<a target="_blank" href="https://makerworld.com/en/@MalcTheOracle" rel="nofollow noopener">https://makerworld.com/en/@MalcTheOracle</a>&nbsp;Printing instructions:It&#39;s not as hard as it looks. 1. to have colour control over each individual part, go to the sub-item &#34;Render&#34; to download each part individually and then import them into Bambu Studio and merge them together.2. render the QR code first and then the body    a.           First switch off Render Body (1) and switch on the other two switchesb.           Then click on Generate (2) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000503973/design/2024-06-21_0f05f417f0b8.jpeg">c.           Next click on Download (3)d.           and select Download as STL (4)   <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000503973/design/2024-06-21_42897dab859e9.jpeg">3. next, render the body by switching the render body on and the other two also on.4. next generate again, click on download and then &#34;DOWNLOAD STL&#34;5. now open the files in Bambu Studio.+++IMPORTANT+++Make sure you get the message &#34;Are you loading these files as a single object with multiple parts?&#34; and answer the question with &#34;Yes&#34;.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000503973/design/2024-06-21_9cb3a71ffa1ba.png">6. once you are done, you will find the parts already positioned on the plate and then you can decide which colour the body gets and the QR code with the frame.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000503973/design/2024-06-21_984e0d50462b4.png">7. now just print and off you go&nbsp;What is needed1. a ball bearing with the designation 6704, which has the dimensions of 27mm outside, 20mm inside and a thickness of 4mm. So 27x20x4 mmYou can find them here <a target="_blank" href="https://de.aliexpress.com/item/1005006822613982.html?spm=a2g0o.order_list.order_list_main.33.51355c5fshnQtm&amp;gatewayAdapt=glo2deu" rel="nofollow noopener">ALI-EXPR**</a> or at your trusted dealer2. NFC- TAG with a dimension NOT larger than 25x1mm, if you have and want to use other sizes, you can adjust this at the generator3. your data that you want to enter into the QR code generator4. a lot of imagination to print lots of great Q-FOBS&nbsp;QR Code configuration: - you can change the font on the back, display the QR code as dots or squares and the markers can also be changed according to your wishes.- A url can be added- email address- telephone- And WLAN access- And of course your business card with lots of details that you can fill in- And much more, take your time to look at the 34 possibilities&nbsp;NFC chip:- You need an NFC-TAG which is not larger than 25x1mm. You can find it here. <a target="_blank" href="https://de.aliexpress.com/item/1005006331445032.html?spm=a2g0o.productlist.main.19.4696D2jUD2jUvH&amp;algo_pvid=9d46a4a4-4629-48b5-b69b-1e77cf834fd6&amp;algo_exp_id=9d46a4a4-4629-48b5-b69b-1e77cf834fd6-9&amp;pdp_npi=4%40dis%21EUR%214.81%213.61%21%21%2136.77%2127.58%21%402103867617188902524626708ec96d%2112000036787702439%21sea%21DE%212004944030%21&amp;curPageLogUid=cO3FF52gGWDi&amp;utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">ALI-EXPR**</a> or at your trusted dealer- With a print layer height of 0.2, the print should have a pause at the 12th layer so that you can insert the NFC-TAG at your leisure and then continue printing.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000503973/design/2024-06-21_2058f092d7f43.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000503973/design/2024-06-21_034b84ddeeec.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000503973/design/2024-06-21_4b2868d0761a2.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000503973/design/2024-06-21_8f21758e857b4.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000503973/design/2024-06-21_4bbd3f1f6880c.jpg"></figure>Enclosed is also a printing plate with different adapters for the right finger, in the following sizes. 18mm, 17mm, 15mm, 14mmLast but not least I couldn&#39;t have provided this model and customisable tool without the excellent work of MalcTheOracle.This project includes the scadqr library released under the MIT license by xypwn.&nbsp;LINKS&#34;<a target="_blank" href="https://makerworld.com/en/@MalcTheOracle" rel="nofollow noopener">MalcTheOracle</a>&#34; <a target="_blank" href="https://makerworld.com/en/@MalcTheOracle" rel="nofollow noopener">https://makerworld.com/en/@MalcTheOracle</a>&nbsp;&nbsp;It works great for me.  If you like my work/project consider supporting me with these options:<ul><li>leave a like</li><li>leave a comment</li><li>download the file</li><li><a target="_blank" href="https://www.buymeacoffee.com/thebiggreek" rel="nofollow noopener">or buy me a Coffee</a></li></ul>This article/post/text or the print profile as well as the finished print may not be used for commercial purposes.Have fun printingTBG

ULTIMATE QR CODE-NFC TAG-FIDGET-SPINNER-FOB

CuhRazy

NOTE: The stars are small. I changed 1st layer to 1 wall. When I was using 2 walls the stars printed not the best. &nbsp;The default print profile has provided me excellent results. I have a PLA profile on there as well. All I did was turn the speed down and lower the temps and the wisps are pretty much gone. Granted every printer and filament is different. Any questions or issues please let me know!

American Flag Light Box

lightbox

JF-699

I hope you enjoy this layered Mothers Day Print! You can choose what color you would like for each layer in the print profile. I turned ironing top surfaces on which makes the print an hour longer. If you want it to print faster, turn of ironing. Please check out some of my other prints!&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/@JF699" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439684/design/2024-04-21_3f58b0a92b8e8.webp"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/@JF699" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439684/design/2024-04-21_f121a354a5e438.webp"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/@JF699" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439684/design/2024-04-21_f785b02fd0789.webp"></a></figure></td></tr></tbody></table></figure>

Love You MOM - Layered - Mother's Day

BlckStar

Galaxys Edge Panel Power outlet Cover Large PlateThis can be printed using a single-color PLA&nbsp;Print Settings0.2mm layer2 walls15% infillIroning on top surfaces for a smooth finishsupports required for the bottom section of the plate, no raft, or skirt is needed.For best results use Ironing on all top surfaces

Galaxys Edge power outlet plate Large

Star Wars 

Toby3D

ModelLuminaNest – a symphony of light and shadow crafted for the connoisseur of elegance. Our sculptural STL model for a tealight holder is not just an accessory; it's a statement. With its sleek lines and contemporary design, LuminaNest transforms the simple act of lighting a candle into an art form.&nbsp;Originally made by Covic 3D, this model has been minimized to play well with the original for a great decor look.&nbsp;&nbsp;Print settingsPrint sequence: By layerTravel speed: 400 mm/s&nbsp;Acceleration Normal printing: 8000 mm/s2Initial layer: 400 mm/s2Outer wall: 4000 mm/s2 Infill Grid or Triangles works well. Printed both in PETG and PLA without any issues.

Small LuminaNest - Tealight holder - Home decor

house hold items 

PWORLDMOB

Ring camera privacy cover .Operation Blind Eye. SB 400.  Tired of your parents or spouse checking the ring camera ? worry no longer SB 400 here to save the day .

Ring Camera Cover 

camera accessories 

kisik20

Portable hook for beach umbrella (parasol): Using 3 prongs design, this umbrella hook can be used for hanging any things to save a lot of convenience on the beach. With strong load-bearing design, this umbrella hook provides extra support for larger items such as towels, digital cameras, beach bags as well as small items such as sunglasses, camera, phone. The inner diameter is 50mm (can be used for parasols with a maximum diameter of 50mm) The hook is suitable for outdoor, beach, etc.

Universal beach umbrella hook

beach

Little Hobby Shop

<div><h1>Summary</h1><div>Simple but effective mount for the Raspberry Pi Camera.<ul><li>Snap fit camera board case.</li><li>Hardware free adjustment with printed wing nuts.</li><li>Profile mount takes 2 x M3 Socket Cap screws. 6-8mm long recommended for 2020/V-slot profile mounting.</li></ul>All threads are ISO M14 if you wanted to add accessories or design a different mount plate.No support required. There is a short bridge on the camera case that all printers should be able to handle.Print as many or as few arms as you need with extra wing nuts as required. Pictures show 2x arms and 4x M14 Nuts, one each of everything else.</div></div>

Pi Camera Mount - Universal - Snap fit

MikeGTP

I designed this toy for my great nephew. It meets the CPSC guidelines to NOT be considered a choking hazard. This may aid your kid with motor skills, colors and teaching him hisnames if it happens to be Miles!

MILES Toddler Baby Shape Learning Toy. SAFE!

Baby Toys

WannaRun

TESLA Model 3/Y 空调出风口香薰夹，适配大多数市面上可以购买到的香薰

TESLA Model 3/Y 空调出风口香薰夹

car accessories 

CherrysCollection

Update2: Added another version that has a view 10° downwards view.&nbsp;Update1: Added another version that has a view 5° downwards.&nbsp;Designed quickly as it was required to keep an eye on the baby while he is sleeping.Hope it is useful for someone else too.&nbsp;The thickness of the crib is approx 2 cm.&nbsp;Happy Printing!

Ring Indoor Cam Crib Mount

Baby Items

翻滚吧咸鱼

2024年6月24日更新已经更新适配拓竹001盲盒套件的模型，不用额外购买零配件。可移步：<a target="_blank" href="https://makerworld.com/zh/models/508941#profileId-424881" rel="nofollow noopener">https://makerworld.com/zh/models/508941#profileId-424881</a>&nbsp;The model has been updated to fit the Bambu <a target="_blank" href="https://shrsl.com/4cxd4" rel="nofollow noopener">LED Lamp Kit 001</a> without the need to purchase additional parts. Can be moved:<a target="_blank" href="https://makerworld.com/zh/models/508941#profileId-424881" rel="nofollow noopener">https://makerworld.com/zh/models/508941#profileId-424881</a>——————————————————————————————————————————感谢开源的泰坦尼克号模型。我以此为基础设计了泰坦尼克主题夜灯。&nbsp;按照我的配件表买的话，可以有以下几个亮点：Type-C充电、2500mah大电池、金属触摸开关、三挡灯光调节（如果你是用白色耗材打印的话，最亮的档位足够看书了）<figure class="image image_resized" style="width: 50.73%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485129/design/2024-06-05_4013c2c13d7ea.jpg"></figure>&nbsp;按照这样接好以后，把电池的位置和几个模块用502胶水粘起来。注意触摸开关的位置一定要对准，这一步可能需要一点耐心。————————————————————————————————————————Thanks to the open source Titanic model, as the basis for the design of the Titanic-themed night light&nbsp;If you buy it according to my accessory list, you can have the following highlights:Type-C charging, large 2500mah battery, metal touch switch, three levels of light adjustment (the brightest level is enough for reading if you&#39;re printing on white material)&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485129/design/2024-06-05_821ea136c4439.jpg"></figure>Once assembled in this way, glue the battery position and a few modules together with 502 glue. Note that the touch switch must be aligned, this step may require a little patience.——————————————————————————购买清单1.台灯电路板：https://m.tb.cn/h.gVYgWp6VCGw9pUQ?tk=dwTnWx881bj 2.LED灯板：6cm，1W，3.7V（颜色按照自己喜欢的选就行）https://m.tb.cn/h.g4OcrZnyzKxapx6?tk=4UVJWx8jzcK 3.金属触控按钮（10mm）：买的铜镜装饰盖，便宜好看，只要尺寸合适，你也可以自己挑选合适的金属帽。 https://m.tb.cn/h.gVQlNaaHyImEHz4?tk=4oHqWx8kRmo 或者 https://m.tb.cn/h.gVES9qCIsrDUQHn?tk=Z71SWx8kyHc 4.黑红白颜色导线若干 5.502强力胶 6.m2*8自攻螺丝：4个，用于固定电路板和LED灯板 https://m.tb.cn/h.gVEQ5fXsmNGEp9d?tk=tAbgWx8ovXC 7.电池：3.7V聚合物锂电池 50*50*6.5mm 2500mAh https://m.tb.cn/h.gVE97jLDgZx7AIM?tk=YVHzWx8p91y购买链接仅供参考&nbsp;Purchase List1.Circuit board: https://m.tb.cn/h.gVYgWp6VCGw9pUQ?tk=dwTnWx881bj 2.LED light：6cm，1W，3.7V（Colors according to preference） https://m.tb.cn/h.g4OcrZnyzKxapx6?tk=4UVJWx8jzcK 3.Metal touch button (10mm) : bought copper mirror decorative cover, cheap and good-looking, as long as the size is appropriate, you can also choose the right metal cap. https://m.tb.cn/h.gVQlNaaHyImEHz4?tk=4oHqWx8kRmo  or https://m.tb.cn/h.gVES9qCIsrDUQHn?tk=Z71SWx8kyHc 4.Number of wires 5.502 Super glue 6.m2*8 self-tapping screws: 4 for fixing circuit boards and LED lightshttps://m.tb.cn/h.gVEQ5fXsmNGEp9d?tk=tAbgWx8ovXC 7.Battery: 3.7V polymer lithium battery 50*50*6.5mm 2500mAh https://m.tb.cn/h.gVE97jLDgZx7AIM?tk=YVHzWx8p91yPurchase link for reference only

Titanic Light＆Table lamp——泰坦尼克夜灯

Table Art

planpa3d

I was hoping to find a tough box to store some parts and tools for my Bambu printers, and I couldn’t quite find anything that I liked. So I decided to design my own.I wanted the box to be strong, snap shut, able to print in one piece, not require additional hardware, and not be over complicated. I didn’t want to be limited as to how many extruders, nozzles, or whatever part I wanted to put in the box. So, I left the inside open.I created two hinges that print in place, one for the main box, and one for the snapping mechanism to lock the box shut. Through the help of some supporters, a lot of test prints with different tolerances in the hinges and snapping mechanism where ran. Here is the best combination we found. A Big thanks to you all who helped!I printed this several times personally and created different logos to put on the lid of the box. I am also including a blank version of the box if you wanted to add your own text, or logo to it. I printed the box without support plenty of times without issue, but if your printer doesn’t bridge well you will want to add a small amount of support under the locking pin only.I also am adding a blank version of the box where the locking mechanism can be printed out separately, just in case you find its too tight and breaks accidentally.If printing the locking mechanism in place I recommend working the hinges in, moving them back and forth several times this will open up some of the clearances needed to allow the snap to lock in place without breaking. The lock can be rather tight in the beginning, but after a few uses should wear in just fine. If you find it too tight for your liking, you can always take a small file to the locking pin, and remove the bottom layer of filament that tends to be loose anyway.Enjoy!!

Tough boxes Print in place

print in place

mendieselnco

Do you own a P1S or X-series printer that flings filament poop all over your floor? Is it positioned in a location where using the typical poop chute can be quite a hassle? Allow me to introduce the innovative Poop Drawer! This nifty addition directs any printer residue into a conveniently located drawer beneath your printer. All you have to do is slide out the drawerand dump out the poop. Easy peasy lemon squeazy. The Poop Drawer requires approximately 800g of filament and takes approximately 23 hours to complete the printing process. Glue is highly recommended on the main body pegs, and overlaping areas on the drawer.&nbsp;Changelog:1/8/2024 - Updated print profile, replaced chute with V21/9/2024 - Added drawer lid print profile

P1S / X1Poop Drawer

P1S Stacks

PecaM6

Flat version of AMS riser. Glass holder STEP file is included. Print from PLA, but if you mostly print high temperature materials i recommend printing from ABS. I connected the parts using steel pins (6x30), but I included pins for print.&nbsp;If you want or need, you can print a reinforcement between both sides. I use one reinforcement in place of the seam, but it isn´t necessary.

qr

lightbox

mom

Star Wars

house hold items

camera accessories

beach

camera accessories

Baby Toys

car accessories

Baby Items

Table Art

print in place

P1S Stacks

mods