Frank0r

upi2023

Ablage Backzutaten

Maus

Cerwajz

Pool filtration hose coupling 38-38mm 

Pool

Alex.M

The included .3mf file includes the needed gcode modifications&nbsp;<h2>Usage Instructions:</h2>1. Click on “Raw Model Files” and choose the file you want to use (PLA for regular temperatures, PETG for high temperatures)<h4>2. Open the .3mf file using Bambu studio, click on “Slice Plate” and then “Print Plate”.</h4>&nbsp;IMPORTANT: You cannot run this directly via the mobile app (the mobile app does not support custom gcode).&nbsp;<h3>All my BambuLab Temperature Tower models:</h3><ul><li><a target="_blank" href="https://makerworld.com/en/models/112623" rel="nofollow noopener">BambuLab A1 mini Temperature tower</a></li><li><a target="_blank" href="https://makerworld.com/en/models/24974" rel="nofollow noopener">BambuLab A1 Temperature tower</a></li><li><a target="_blank" href="https://makerworld.com/en/models/18675" rel="nofollow noopener">BambuLab P1P Temperature tower</a></li><li><a target="_blank" href="https://makerworld.com/en/models/18683" rel="nofollow noopener">BambuLab P1S Temperature tower</a></li><li><a target="_blank" href="https://makerworld.com/en/models/24970" rel="nofollow noopener">BambuLab X1C Temperature tower</a></li><li><a target="_blank" href="https://makerworld.com/en/models/112624" rel="nofollow noopener">BambuLab X1E Temperature tower</a></li></ul>

BambuLab X1C Temperature tower

J3DPS

Hueforge Butterfly. Normally Hueforge prints need specific filaments to get the desired effect. I designed this one a little differently so that it will work with a wider range. Most any black pla will work and the magenta can be substituted with a wide selection of your favorite colors. I advise using Bambu Jade white to be sure that blending works well, but you may be able to get away with other whites as well. This is a tiny bit thicker than standard settings so it can be easily handled. If you need to resize, please be sure to NOT resize on the Z axis as that will change the layering. Please don&#39;t be alarmed if the stl looks strange, it will slice and print just fine. Depending on your computer, slicing may take some extra time. Please be patient.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA BambuLab Basic Magenta Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #17 (1.44mm) swap to Magenta At layer #25 (2.08mm) swap to Jade White for the rest.

Hueforge Butterfly

DesignCraft

This adapter system wraps the edges of a ERYONE 250g 149x38mm cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Features:<ul><li>Reusable</li><li>ERYONE nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Measure your spool first to ensure it matches the specified dimensions</li><li>Print this model twice for a single spool</li><li>Affix one spool ring adapter on each side of the ERYONE spool</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

ERYONE 250g Bambu Lab AMS Cardboard Spool Adapter Ring

spool

reddadsteve

Sylvester James Pussycat, Sr. is a fictional character, an anthropomorphic tuxedo cat in the Looney Tunes and Merrie Melodies series of cartoons.Sylvester appeared in 103 cartoons and most of his appearances have him often chasing Tweety, Speedy Gonzales, or Hippety Hopper. Three of his cartoons won Academy Awards, the most for any starring Looney Tunes character. Sylvester's trademark exclamation is "Sufferin' succotash!"No supports are required. One piece contains built-in supports, an optional part without the built-in supports is also supplied if you want to use your slicer supports. If you have the proper filament colors, no painting is needed.The assembled model is 200mm tall.Enjoy! ...........................................................................................................**Print Instructions:** Supports: No Resolution: .2mm Infill: 10%Notes:**Refer to the notes below for a few helpful printing and assembly instructions............................................................................................................**Building the model**ColorsBlack: (Paramount3D PLA - Black) body_black body_black_without_supports (optional piece without built-in supports) eye_blacks (contains two identical pieces) whiskers_right (contains two identical pieces) whiskers_left (contains two identical pieces) foot_pad_left foot_pad_right ..Red: (Hachbox PLA - True Red) mouth nose ..White: (Overture PLA - White) eye_white_left eye_white_right tail_white body_white hand_left hand_right foot_left foot_right ear_left ear_right hair_back_left hair_back_right ..Pearl: (Protoparadigm PLA, out of business - White Pearl) claws_hands (contains eight identical pieces) claws_feet (contains six identical pieces) ..Pink: (Paramount3D PLA - Harajuku Pink) tongue...........................................................................................................**Printing and assembly tips**Printing tips 1 - No supports are required. 2 - There are some pieces that may need brims or rafts, use your discretion. When setting up my prints I prefer to be conservative, especially since the base of many parts are hidden when inserted into another part. For the smaller parts, a good first layer is helpful.*I used brims on: claws_hands claws_feet hand_left hand_right3 - I used a pearl white color for the claws to hightlight them. A clear transparent with a higher infill may work well, or a silky white.4 - The body_black piece is taller than any of my other models. It fits on my Prusa MK3 but not on the Prusa mini. Be sure to check this part first to ensure your printer can handle the height. The model can be resized down, but be careful to check that the small parts can still be printed... Assembly tips:1 - Take your time gluing the model together and enjoy the process.2 - I used E6000 sticky craft glue to put this model together. The sticky glue allows more time to position the parts than a fast drying superglue. I have 'fat fingers' and a shaky hand, so the sticky glue works out best for me, especially with small pieces. Just remember to leave enough time for the glue to set before combining too many parts.3 - Be sure to insert the body_white (with completed mouth/tongue) into the body_black before attaching the hands.4 - All the claws have round bases. Be sure to rotate the nail in the correct direction when inserting and gluing them in.5 - The whiskers fit perfectly, but need to be positioned correctly to insert them. The flat side from the printer bed faces back. The holes are notched and the whiskers only fit one way. Personally, I had to keep poking around to fit them in but once positioned correctly they slid right in.6 - Refer to the assembly diagrams in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.Do not hesitate to ask questions, feedback is essential to making better models.&nbsp;

Sylvester the Cat

Figur

deigge

I wanted a bottle holder for my big 1L bottle and on printables I only found small bottle holders. The innner diameter is 9cm.Printed mine with 0.3mm layer height and 20% infill.

Maus

Pool

Neu

hue

spool

Figur

Skadis