Foxlanda

squinn

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_fd01d80e216de.gif"></figure>This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size.&nbsp;After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), wind up the cord clockwise using the handle, and then extend by simply grabbing the cable by both ends.&nbsp;Update 2023-09-13:&nbsp;Alternative smooth-sided versions of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance. Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_e75ea621224d08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_68f2b35a6774b8.jpg"></figure>&nbsp;

Portable Cable Organizer / Winder

To try

jocin_

Addition 14.06.2024I found  the G-Code adaption which <a target="_blank" href="https://makerworld.com/en/@AdamL" rel="nofollow noopener">AdamL</a> introduced with his model: <a target="_blank" href="https://makerworld.com/en/models/467118#profileId-378814" rel="nofollow noopener">The Scrubbler: Enhanced X1/P1 Nozzle Wiper</a> very cool and a awesome idea, thanks for sharing this idea. I took inspiration from this and implemented my own version in the Change filament G-Code. Also I adapted AdamL ´s code for the Machine start G-Code so that the travel path is lower and fits my design better. During testing I mentioned that lower acceleration of about 15000 had a better cleaning effect. But could be that this is specific for my X1C.If you want to implement this i uploaded a instruction “240614_nozzle_rub_G-Code_adaption.pdf”, you find it under: “Documentation”.&nbsp;This is what it looks like:<ul><li>Machine start G-Code <img class="image_resized" style="width: 43.78%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_5952291fb477b.gif">  </li><li>Change filament G-Code <img class="image_resized" style="width: 43.85%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_4d3b92720c696.gif"></li></ul>&nbsp;Have fun!_________________________________________________________________________________________________________________________________________Update 08.01.2024Quick update on the tray for both brushes. Added a small plug to the bottom of the tray to prevent it from rotating because there where some issues reported with that.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_90b8ac2f999d08.jpg">New raw model files:<ul><li>A1-Brush:<ul><li>Nozzle_wiper_x1c_with_a1_brush v3.step</li><li>tray_A1_v3.stl</li></ul></li><li>A1-mini-Brush:<ul><li>Nozzle_wiper_x1c_with_a1-mini_brush_v2.step</li><li>tray_A1-mini_v2.stl</li></ul></li></ul>Updated all my print profiles with a second plate which contains the new version.&nbsp;If want to use your own print profiles, use arachne wall generator and orientate the Tray like this:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_a51cb51bab44c8.jpg">&nbsp;This compromises the print ability of the tray and supports are needed, use paint on supports like this:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_595ac1760a20b8.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_8c081c3a42f8f.jpg">Support setting:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_f5ff07781ab9.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_be0bf17e5065d.jpg">!Be care full to not hurt yourself when removing the supports in the tray, use pliers or a small slotted screwdriver!&nbsp;Thank´s to all for the feedback____________________________________________________________________________________________________________________________________________________Update 04.01.2024New A1 brush version, with following changes:<ul><li>Chamfer on the tray  </li><li>Lowered height of the block 0,5 mm</li></ul>Thanks <a target="_blank" href="https://www.printables.com/@coreyward" rel="nofollow noopener">@coreyward</a> for the suggestions&nbsp;Addition for print settings:If want to use your own print profiles use the arachne wall generator to get a support for the overhang on the block.<img class="image_resized" style="width: 30.29%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/163521ea-447a-44a5-a9cb-dd1d5dfe496e.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_3a22e0a17d5b7.png">&nbsp;________________________________________________________________________________________________________________&nbsp;Update 26.12.2023On request I adapted the design to fit the A1 brush. Under “Raw model files” there are now two folders, use the parts in the “A1-Brush” folder if you want to use the A1 brush. Both parts are needed to use the A1 brush.Just import the parts in one of the existing print profiles, orientate them the same way and print;-)!Attention! with the A1 brush there is very little clearance between the tray and the build plate, so make sure to align the build plate properly.<img class="image_resized" style="width: 38.16%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_ccf6556620e57.jpg">&nbsp;Thanks @<a target="_blank" href="https://makerworld.com/de/u/2924277124" rel="nofollow noopener">GE_AMX</a> and @<a target="_blank" href="https://makerworld.com/de/u/2038862755" rel="nofollow noopener">kevman</a> for testing_____________________________________________________________________________________________________________Update 20.12.2023I used the A1-Mini brush, as it is different to the A1 i:<ul><li>corrected the link</li><li>corrected the description</li></ul>Thanks <a target="_blank" href="https://www.printables.com/@schiko" rel="nofollow noopener">@schiko</a> for pointing that out on printables.com_______________________________________________________________________________________________________________I liked the nozzle brush of the A1-Mini, so i designed two parts to use it on my X1C along with the original wiper.Needed parts:<ul><li>for mounting use the original screw for the nozzle wiper, 3 of them are needed</li><li>A1-Mini nozzle brush <a target="_blank" href="https://store.bambulab.com/products/heatbed-nozzle-wiper-a1-mini?skr=yes" rel="nofollow noopener">https://store.bambulab.com/products/heatbed-nozzle-wiper-a1-mini?skr=yes</a>  </li><li>some double-sided adhesive tape <img class="image_resized" style="width: 52.08%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_1a14497a8d7958.jpg"></li></ul>Mounting:<ol><li>Mount the original nozzle wiper on the block <img class="image_resized" style="width: 40.83%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_72222ec740b41.jpg"></li><li>Mount the block to the poop chute <img class="image_resized" style="width: 44.99%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_aa9d2448f7399.jpg"></li><li>Cute the A1-Mini nozzle brush to 10 mm length put some double-sided adhesive tape to the bottom and put it in the tray <img class="image_resized" style="width: 19.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_06cde2db1acfe.jpg"><img class="image_resized" style="width: 22.2%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_1d57b502adf3a.jpg"><img class="image_resized" style="width: 28.98%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_8eab04be6eec8.jpg"></li><li>Mount the tray on top of the block <img class="image_resized" style="width: 47.42%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_dd9145e102d4b.jpg"></li></ol>Filament: extrudr greentec pro (or ABS, ASA, PETG etc.)Print settings:<ul><li>orientation: see picture and attached 3mf</li><li>layer height: 0.12</li><li>wall generator: arachne (edit 04.01.2024)</li><li>wall loops: 3</li><li>Top/bottom layers: 6</li><li>infill: 10% gyorid</li><li>support: no</li><li>brim: no</li></ul>

Bambu Lab X1/P1 nozzle wiper with A1 Brush

Bambu & 3D printer stuff

laisch

Router Radius Jig / Templatewith mountable holderR5, R10, R15, R20, R25, R30<h3> </h3>

Router Radius Jig (R5,10,15,20,25,30)

Woodworking

TotalChaos

My own attempt at making a fast printing speed glider!Multiple adjustments, wing tip, tail flaps to try create the fastest or longest flying glider.&nbsp;Mix colours or print in one colour. Printed in petg&nbsp;NEW FIGHTER JET GLIDER - DOWNLOAD NOW FOR SOME EXTREME FAST PACE FUNhttps://makerworld.com/en/models/55493#profileId-57047 ALL NEW V2 HAS BEEN RELEASED WITH LAUNCHER, FOLLOW THE LINK BELOW https://makerworld.com/en/models/50183#profileId-52000&nbsp;Have Fun :)

Speed Glider - Easy & Fast Print!

Planes

BEAMink

Got tired of always running to the store so thought I would model my own. They work surprisingly well.

To try

Bambu & 3D printer stuff

Woodworking

Planes

Music