Foundrylabstx

djhesepe

Kabel Klammer für Stativ, Objekt wird Stetig angepasst und aktuellste Version hochgeladen.Bilder sind noch von V1, Datei ist schon V2

Cable Clamp / Kabel Stativ Klammer

Computer Stuff

BT3D printing

World of warcraft logo wall art made with Hueforge. 3mf is precolored, for manual color change use:0.4 nozzle 0.08 layer height 0.16 first layer height 100% infill Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #9 (0.8mm) swap to Orange At layer #16 (1.36mm) swap to Pure Yellow for the rest.

World of Warcraft logo wall art

Gaming

Many24

Hooks which I designed from scratch, inspired by “Pavel”. The original hooks didn't work as planned, they were too tight and the “one hook, one pin” design is not good, I also damaged the board in several places when removing the original ones.This design works with 2 hooks, which is much easier to install and also remove, but holds very well thanks to the small bumps on the hooks:<figure class="image image_resized" style="width:32.21%;"><img src="https://makerworld.bblmw.com/makerworld/user/2415104395/draft/2023-09-27_2m5xyx0sbbny.png"></figure>I made all the sizes from 10mm to 100mm with 5mm increments, so it should be enought for all the use cases.<h4>Print instructions</h4><ul><li>I used PLA, but any material should do</li><li>No supports needed</li><li>4+ perimeters for added stiffness</li><li>3MF file with all the sizes + 4 perimeters</li></ul><h5>Update 01/01/2022</h5>I just found out that one of my boards has thickness of 5mm, but the other one has just 4,9mm, meaning the fit is not tight as it should be, so I uploaded new files with hook clearance 4,8mm and for even more tight fit - 4,6mm.Depending on your board thickness you want to use files:<ul><li>5mm board - 4,9mm hook clearance</li><li>4,9mm board - 4,8mm hook clearance</li><li><4,9mm board - 4,6mm hook clearance</li></ul>

IKEA Skadis - Hook (10mm - 100mm)

Ikea

fpgchicken

A simple holder for a gas burner, flambé burner, for the Ikea Skadis perforated wall.<ul><li>I Use Simple PLA</li><li>Infill 10 &</li><li>Needs Supports</li></ul>

Ikea Skadis / SKÅDIS/ kitchen burner / gas burner / flambé burner Holder

Utility Stuff

mail.iou

Print Filament:PETG, ABS, and ASA are the best, and PLA+ is also acceptable. If it is PLA, it may be deformed or sticky due to the heat of the filament.&nbsp;This is a redesigned Poop Baffle, version 2 improved: 1. One-piece printing. 2. The hole and groove design is canceled on the poop impact surface, and it is changed to a solid one with raised groove lines to reduce poop rebound. 3. Added two new sizes of poop storage boxes (90x150mm, 110x150mm).&nbsp;Print Filament:PETG, ABS, ASA are the best, PLA+ is acceptable but may be deformed due to the heat of the filament.&nbsp;Notice: If you use a 90x150mm box, do not intersect the wall position of the box with the baffle to avoid collision when the Z-axis is lowered, as shown below:<img src="https://makerworld.bblmw.com/makerworld/draft/303179/2023-12-16_c0b3978e7beb7.png">

Computer Stuff

Gaming

Ikea

Utility Stuff

A1 Printer

Stands