Fords Fabrications

MikeProch

Download the "raw model files" where you can find the temp tower with temperature adjustment !!! Only 38 min + time for calibrating. Makerworld does not support uploading M3F files with editing so for this reason I gave the file to the raw model files.. Enjoy ! ☺️🤌

PLA temp tower 195 up to 220

calibration files

xiaojin84

This is a Fully 3D Printed version of the popular “Eclipse” vent mod. Finding the correct vents for sale can be troublesome in some regions, and they are not exactly cheap. The flaps are strong enough and can stay shut by themselves even under vibrations. The linkages are strong enough, and don't experience lateral loads so they probably won't break under normal use. The vent body rotates inside the dash opening as well. My model has the added benefit of not requiring any tools to take the vents out for maintenance. They come out with a stronger pull.&nbsp;Instructions:&nbsp;Use PETG or ABS or ASA or stronger material with better heat resistance.Print the flaps solid, but you can leave the body hollow with infill.Hinge holes are modeled 1.9mm. I had to use a 1.75mm drill bit to clear them out. If you are confident with your machine's tolerances, you can try not doing that.Use pieces of 1.75mm filaments as shafts for hinges. Insert them in place, leave 1-2mm poking out, and use a heated piece of metal to deform the head and fix the shaft in place.Use brims for the vent body, since it has too small of a contact surface to stay stuck to the plate.

MX-5 Miata Alternate AC Vent

tools

Stamatis Sarlis

A spacious desk organizer for your office.Note if you have bed adhesion issues please add a brim to the print profile.Note 2: You can adjust how tight will the parts by slighting unscrew the cylinder<ul><li>Print all plates</li><li>Screw the cylinder on the base</li><li>Put the two storage layers on top of the base through the cylinder</li><li>Press fit the top part on the cylinder</li><li>Ready!</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/410594/2024-01-16_4b509fcf8d888.gif"></figure>

Rotating spacious Desktop Organizer

household tools and trinkets 

HpInvent

After many requests I designed this round version of the popular Inflated soft Cloth Planter Plant Pot Vase Series6 .&nbsp;Due to many requests for commercial licenses for my 3D models I created a patreon page. You can become a member to get permission for commercial use or just want to support my work : <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener">https://www.patreon.com/user?u=79128277</a>  There you can also find exclusive Models for Patreon Subscribers only ;)&nbsp;If you Just want to give a one time Support you can buy me a coffe here ;)  <a target="_blank" href="https://buymeacoffee.com/hpinvent" rel="nofollow noopener">https://buymeacoffee.com/hpinvent</a>&nbsp;Here is a small Sneak Peak of a coming Bathroom Set  More Information about the launch date and early acces can be found on my Patreon. <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-06-14_835436fae26ee.png"></a>&nbsp;Also check out my other Designs!I have a bunch more stuff in my profile!! <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a><a target="_blank" href="https://makerworld.com/en/models/428498" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-04-18_7588ba5642a27.png"></a><a target="_blank" href="https://makerworld.com/en/models/452212" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-05-18_5ba103201c91e.png"></a><a target="_blank" href="https://makerworld.com/en/models/426994" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-04-15_b0f8912a15393.png"></a><a target="_blank" href="https://makerworld.com/en/models/427979" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-04-15_b1e75bac7bd51.png"></a><a target="_blank" href="https://makerworld.com/en/models/416941" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-04-08_ebe2de8bae1b3.png"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-03-06_ea517b7dbe741.png"></a><a target="_blank" href="https://makerworld.com/en/models/394559" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-03-27_3b061a50c97b7.png"></a> <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-03-08_a8a626fc04c78.png"></a>  &nbsp;&nbsp;&nbsp;Happy printing!

Inflated Plant Pot Nr.6 Round Version

planter/pots/containers

gary.sinkowitz

A Japanese Hex Toro style hexagon lantern&nbsp;215 mm height x 155 Width&nbsp;200 mm Height Shade&nbsp;Supports are required to print lantern base frame and top, see 3mf files&nbsp;The fassung-lamp socket ( e14-28 mm): <a target="_blank" href="https://www.amazon.de/dp/B097K4YNL9" rel="nofollow noopener">https://www.amazon.de/dp/B097K4YNL9</a>The electrical cable and switch: <a target="_blank" href="https://www.amazon.de/dp/B002DAOX58" rel="nofollow noopener">https://www.amazon.de/dp/B002DAOX58</a>The E14 Bulb used here:<a target="_blank" href="https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-250-lm-kerzenfoermig-opalweiss-30498748/" rel="nofollow noopener">https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-250-lm-kerzenfoermig-opalweiss-30498748/</a>  &nbsp;The slicer settings for the Base frame and Top:&nbsp;.20 mm Standard(All standard settings and speeds, Aligned seam settings)Filament: Eryone Matte BlackSupport Settings&nbsp;Manual Tree Supports on Base and Top from Base Plate OnlyNormal Supports from Base Plate Only&nbsp;The slicer settings for The Shade:&nbsp;Filament: Sunlu PLA+ WhiteNo Supports, Seams - Aligned .20 mm Strength and Generic PLA Infill % - 100, Rectangular Wall Loops - 8 Top Shell - 8 Bottom Shell - 6  Seam Position- Aligned

calibration files

tools

household tools and trinkets

planter/pots/containers

decorations