The model prints without supports, requires no hardware, and assembles easily after printing. The tray is fully customizable: you can generate it to match your faucet diameter, tray width, tray length, and the internal left-to-right tray inclination. The base design also includes a fixed 10° back-to-front incline to help water drain away from the sponge.

The models has different objects for each part ( body, belly, eyes, pupil ) There are several profiles to choose from: tiny 12mm height, normal - no assembly, normal - separated parts.

These two 3D models are artistic pots designed for painting tools and desk organization. The first model is a brush cleaning pot with three vertical slots to hold brushes upright and one horizontal slot to rest a brush across the top, making it practical while you paint. The second model is a simpler pot without slots, which can be used either as an organizer or as a painting cleaning pot. Both designs combine functionality with a sculptural, decorative look.

Customizable cards box: - easy to print. - no assembly ( Print-In-Place ). - no tools or accessories needed. - tested closing locking pin for over 600 open/close repeats without any signs of wear. ( tests done with Bambu PLA )

Phone and/or tablet stand for the stock market fans and not only. Tested with a 10" iPad to be stable. Bigger than that I'm not sure if it holds it, as I don't have a bigger one. The bull and bear are printed separately and you can decorate your desk, or print also the stand which has a front place to hold them. The stand can also hold writing tools inside, as a tray.

Apple phone/watch stand which can be filled with coins or other weights in order to have a heavy and reliable charging stand.

This is my final station for holding all my main tools for painting: airbrush, brushes, different tools, markers, water pots, cleaning pot for airbrush. All that i need usually when painting. (beside paints)

Skull is showing partially and I had fun painting this, as he is bleeding. There are 2 profiles available, to print it as an ornament or organizer.

Echoes of the Damned “They say the vessel was once pure, meant to hold sacred waters that could cleanse sin itself. But the desperate and the damned came to it seeking forgiveness too often. Their cries, unanswered, sank into the clay — their anguish absorbed, not absolved. Now, when the pot is filled, the water trembles as if remembering. Listen closely, and you might hear the voices clawing to escape, each drop an echo of the souls it could not save.”

* simple to print, with no supports. * 3d hexa pattern that reflects the light at different angles. Glossy materials enhances this effect. * 102mm x 102mm x 84mm external size of the pot in my profile, but can be resized bigger. The bigger the better. 👌

This is a simple and easy print, designed to look great, especially with glossy filaments. (basic, galaxy, metal etc) The printed model will look great and does NOT need any support.

#Crowdfunding Feature Do you think it's strong enough ? (bambu matte pla with 2 walls only) This is my new storage/transport case built for painters but ready for anything. Really satisfied with the latch system on this big storage box. All the parts are 3d printed and no supports were used. https://makerworld.com/en/crowdfunding/91-stashup-storage-transport-system

* Simple to print without supports. * Hexa pattern which creates beautiful shadows.

* strong build and simple print with NO Supports. * strong and reliable locking mechanism using only 3d printed parts. This has a very satisfying click. * print-in-place hinges. * no hardware needed (all parts printed).

I wanted to design a case that is uses only 3d printed parts. No metallic screws, magnets etc. At, the same time, I didn't wanted to make any compromises for this one. ( still strong, reliable locking mechanism and customizable )

After using for some time of my previously designed paint brush rack, I tried to make a new version which will fit more tools and still has the same functionality of the previous model. Even if this one is a bit less wider (fits A1 mini print bed also), there is more space to store tools.

Adjustable Vertical stand for Laptops / tablets. *Simple to print with great quality. *Single color print. You can add whatever color accents you want (using filament line) and even change it whenever you want or change it until you find the best color combination.

This is a set of 2 models, simple to print, yet useful for storing the airbrushes that are not in use, or to display them, like a piece of art as they are (at least some of them) 😁

This is my complete airbrush cleaning pot. I designed it after years of using my initial model, which was simple and easy to use, but still had some things I could improve. So this one is based on my initial airbrush cleaning pot, but everything is a bit changed, to be perfect, at least for my needs. These accessories just slide over the pot. You can interchange them. There is no need to glue anything.