FlexPrint4D

<ul><li>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</li><li>The Model is 150.17x179.62mm in size</li><li>You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.3mm&nbsp;</li><li>Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 3 unique filaments&nbsp;</li><li>Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #10 (0.88mm) swap to Jade White for the rest.</li></ul>

Our designs