Filamently

Ken Mills

The normal size has a 160mm internal (max roll size) and 32mm post diameter (max hole size). The medium and small sizes are 140mm and 114mm respectively. The jumbo version has a 180mm internal and 38mm post diameter to accommodate larger rolls.&nbsp;After adding the towel roll with the end free, spinning the roll clockwise should automatically feed the end out of the side slot. Tear a sheet off by pulling from the bottom upward and towards the right edge of the slot.&nbsp;Feel free to increase the holder's height. I chose 180mm high to fit my bed, and I don't think I would go much shorted, but I think taller wouldn't hurt.&nbsp;Add three rubber pads or feet to help prevent sliding. I have a spot on my workbench paper towels live, so I just may attach it with some double-sided tape to create a semi-permanent home for a roll.

Spiral Vertical Paper Towel Holder

Functional

mikolaj.mazik

I'm a student. If you like my work, please consider leaving a small donation, it will help me create more and more interesting models!<a target="_blank" href="https://ko-fi.com/mikolajmazik" rel="nofollow noopener">https://ko-fi.com/mikolajmazik</a>&nbsp;I present to you the result of 3 weeks of work, the Liebherr T284 mining dump truck, which is designed in a way that allows it to be printed entirely in 3D.This is the first prototype, prepared for gluing with plastic glue, subsequent versions will have versions with screw holes and movable front wheels. A remote-controlled version will appear in the future. Not all tolerances may be correct.Assembly instructions will appear within 2 days.Feel free to scale it up or down, if so, you may need to use toothpicks or something like that as an axis.

Liebherr T284 mining Dump Truck- Fully 3D printable V2 VERSION 

Toys

riccardolisci

<h2>Version 2 of HEPA and activate carbon filter (refillable)</h2>Filter for closed Bambu Lab printers that combined HEPA and activated carbon (EAC- Extruded activated carbon). I have remix my <a target="_blank" href="https://makerworld.com/en/models/49753#profileId-51576" rel="nofollow noopener">old version</a> improving:<ol><li>increased capacity of carbon pellets (more than 30%).</li><li>improving slide fitting of parts</li><li>removed all print supports</li><li>ad a new “two finger remove” (better with two hands)</li><li>moved infill direction of grid for increase mechanical resistance.</li></ol>&nbsp;Use a temperature resistant filament like ASA or ABS (maybe PETG), PLA only for first stage of testing (keep chamber temperature of printer under 40°C).&nbsp;IMPORTANT: remember to adjust the shrinkage according to your ASA/ABS filament!!<h3>bill of Material (amazon.it)</h3><ul><li><a target="_blank" href="https://www.amazon.it/dp/B07HHQKJ4G?ref=ppx_yo2ov_dt_b_product_details&th=1&_encoding=UTF8&tag=errelle-21&linkCode=ur2&linkId=aed3f900a91119a53db7886f9d788013&camp=3414&creative=21718" rel="nofollow noopener">HEPA filter</a> (same filter of <a target="_blank" href="https://makerworld.com/en/models/12786#profileId-24358" rel="nofollow noopener">bentobox</a>, you can search hepa filter for robot iLife, V3, V3S, V3S Pro, V5, V5S, V5S Pro).</li><li><a target="_blank" href="https://amzn.to/3M9IBCL" rel="nofollow noopener">activated carbon pellets</a> - (use only ACID-FREE activated carbon pellets), or use pellets of original Bambu Lab carbon filter.</li><li>cutter</li><li>if you prefer, strip for pull it out</li></ul><h3>assembling</h3><ol><li>cut the side excess of HEPA filter with a cutter</li><li>glue the strip (not necessary)</li><li>insert HEPA filter</li><li>insert activate carbon pellets (EAC)</li><li>insert slide cover on EAC</li><li>slide box EAC onto HEPA filter box</li><li>put filter inside printer</li><li>enjoy</li></ol>&nbsp;<h3>considerations</h3>New capacity of my design box for activate carbon is about 38g. Original Bambu Lab filter is 80g and it is guaranteed for 1440 hours (60 days).So probably it will be necessary to change the activated carbon within 680 printing hours (28days).&nbsp;<h3>tips</h3>Set chamber fan at 50% of power in filament ASA/ABS start gcode with "M106 P3 S130" command.&nbsp;

hepa and carbon air filter for bambu lab

Printer Accessories

Mister.D

&nbsp;A Decorative 3D Panel (2 sizes) to be placed on any planar surface with double side tape. A modular structure can be created with this panel with any combination of colors and positions (vertical, horizontal, diagonal), so place them the way you like the best. This Model is for personal use only (non-commercial). DO NOT redistribute the files to anyone else.&nbsp;Those who are interested in product design, prototyping, product presentation and much more could contact me; my bio contains the contact details. Also, those who want to support my work, there is a link to do it:&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/iammister.d" rel="nofollow noopener">https://www.buymeacoffee.com/iammister.d</a>&nbsp;Have a good day, MR.D

Decorative 3D Panel 

Decor

&nbsp;A set of dual color boxes for your workspace. 3 different sizes, all of them with lid. The print profiles are ready for AMS users but you can change the colors easy as you like. I personally like PLA marble in combination with dark filament on the base. This Model is for personal use only (non-commercial). DO NOT redistribute the files to anyone else.&nbsp;Those who are interested in product design, prototyping, product presentation and much more could contact me; my bio contains the contact details. Also, those who want to support my work, there is a link to do it:&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/iammister.d" rel="nofollow noopener">https://www.buymeacoffee.com/iammister.d</a>&nbsp;Have a good day, MR.D

Organizer Box (set) / v2

Storage & Organization

N33 Designs

A recreation of the iconic 1960/1970s perpetual flip calendar. Includes rotating day, weekday and month cards.&nbsp;My grandad used to have this calendar and when I visited as a kid I would enjoy playing with it so decided it would be a good first project to model and print on my new A1. I only have one photo of it to go by, but I've tried to keep the design faithful to the original and used similar fonts.<figure class="image image_resized" style="width:37.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/439094/2024-01-03_4c8526b693ce2.png"><figcaption>The original</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/439094/2024-01-04_ba6707f865fd3.jpg"><figcaption>Printed in Bambu Lab PLA Matte Bambu Green, eSun Fire Engine Red and Bambu Lab PLA Matte Lemon Yellow</figcaption></figure> PRINTINGThere are various orientations to print the base part, all requiring supports of some kind. I found laying it on it's back with normal grid support works well and is easy to remove. This orientation gives the best appearance to the arch and the only support interface/overhangs are not visible. But of course feel free to try a different orientation.&nbsp;ASSEMBLYLoosen the supports by running a thin blade or business card along the support interfaces. I used the stock Bambu scraper for this.Then cut away the top part that is supporting the female part of the spindle. You than twist this part to release and remove it. Once that's removed you should be able to remove the entire support block in one piece. Sort the cards as follows:<ol><li>January - December</li><li>Monday - Sunday</li><li>blank card (note: the images show a 0 instead of the blank card)</li><li>1-3 (smaller cards)</li><li>1-9 & 0 (larger cards)</li></ol>Place the cards in this orientation and all the holes in the cards should align themselves.Then insert the pin/spindle at the back, it should sit flush.<figure class="image image_resized" style="width:38.42%;"><img src="https://makerworld.bblmw.com/makerworld/draft/439094/2024-01-03_9909799be854.jpg"><figcaption> </figcaption></figure><figure class="image image_resized" style="width:37.85%;"><img src="https://makerworld.bblmw.com/makerworld/draft/439094/2024-01-03_5fdb830077ccf.jpg"><figcaption> </figcaption></figure>&nbsp;The tolerances should be just right and allow the cards to easily rotate, but depending on your print/material/finish there may be more/less friction. You could remove the blank card to loosen up or print an additional blank card. (the existing cards are 1mm thick)&nbsp;CHANGE LANGUAGE OR FONT I've added blank cards as STLs to the raw files so you can customise as needed. The day of week and month cards are also available on Tinkercad with the font I used. <a target="_blank" href="https://www.tinkercad.com/things/jKML1yXcX3k-calendar-months-shared?sharecode=zPkh2sWzQFHyuoKVBuv8KL-MEBhJnHw0ouG7-u27ocE" rel="nofollow noopener">https://www.tinkercad.com/things/jKML1yXcX3k-calendar-months-shared?sharecode=zPkh2sWzQFHyuoKVBuv8KL-MEBhJnHw0ouG7-u27ocE</a><a target="_blank" href="https://www.tinkercad.com/things/cRIbsGOO8v3-calendar-days-of-week-shared?sharecode=rnRlOzMf0U4aOt9rg5PMCxd4_cR9YvcqTAQtfEI3aFE" rel="nofollow noopener">https://www.tinkercad.com/things/cRIbsGOO8v3-calendar-days-of-week-shared?sharecode=rnRlOzMf0U4aOt9rg5PMCxd4_cR9YvcqTAQtfEI3aFE</a>

Functional

Toys

Printer Accessories

Decor

Storage & Organization

Cool Prints