StaticSX

CarlThePumpkinMan

This is an automatic dice tower designed to roll dice for tabletop games. It contains seven plates on which to place dice (one for each of the dice in a standard set of 7 dice), but they are large enough to accomodate multiple at a time if necessary. Pressing one of the pumpkin buttons at the bottom raises the other side of the lever, which pushes up a rod that tips the plate holding the dice, dumping the dice into the cauldron where they spill out into a pumpkin shaped enclosure.I wanted to evoke a Halloween theme by presenting the dice as ingredients being cast into a witch&#39;s cauldron.Special printing intructions: I added a filament change on the basetop to make the fence the dice fall into orange compared to the rest of it, but if you have a single filament printer you can do this by adding a pause there and switching out the filament manually. Supports are advisable on the cauldron itself, as the exit hole and base have some steep angles that may be hard to print cleanly otherwise. I did not use supports and paid the price.Why I made it: <figure class="media"><oembed url="https://www.youtube.com/shorts/Ura4iaaKDws"></oembed></figure> How-to-construct:<figure class="media"><oembed url="https://www.youtube.com/watch?v=WPxvCco1hh4&amp;ab_channel=CarlThePumpkinMan"></oembed></figure>

Automatic Dice Tower Cauldron

Towers

ThreeD-Michael

Tiny Emergency WhistleAlthough very small (only 40 x 18 x 6 mm), this whistle is extremely loud and can be heard from far away. It is therefore ideal as a compact rescue and emergency whistle for your key ring or backpack.&nbsp;WARNING: This is an emergency whistle and not a toy! It&#39;s extremely loud which can harm the ears, so please protect your ears and don&#39;t use it near other people or animals!

Tiny Emergency Whistle - super loud

Useful

Type1Printing

A cool little articulated dragon!

Articulated Flexi Dragon

Dragons

3D design shop

high resolution batman bust

Batman bust

Comic Art

JC3DESIGN

Dragon ball box in multicolor (no multicolor option added as raw file), only 3 plates (number in raw files). Plates printed at 100% infill and multicolor pre-adjusted to the bambu labs printers (compatible with orca silicer). This is my tribute to Akira Toriyama.

DRAGON BALL BOX (multicolor and no-multicolor box)

Anime Art

Brite Minis

A hooded stranger, could be a cultist, monk, or just a cloaked traveler.Suitable for 28mm tabletop games.Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3.There are variants with square and round bases.NOTEA Lich with glowing LED eyes seen in the photo is <a href="https://www.patreon.com/posts/36987767/" rel="nofollow">available on my Patreon</a>.Let me know how it printed for you in the comments and makes!This and other uploads are possible thanks to my wonderful Patrons.If you enjoy it, buy me a drink once in a while and support more supportless models on Patreon!: <a href="https://www.patreon.com/BriteMinis" rel="nofollow">https://www.patreon.com/BriteMinis</a>Follow me on <a href="https://www.facebook.com/BriteMinis/" rel="nofollow">Facebook</a> and <a href="https://www.instagram.com/briteminis/" rel="nofollow">Instagram</a>!Category: Games

Hooded Stranger 28mm (No supports, FDM)

Minis

lucamoretti86

ModelDo NOT adjust the size in your slicer!! The layers will not come out right. Do not change the size, this will cause errors in color change compromising the entire print. Use my print profile or you will not get the desired results. It can be printed safely without AMS and on any printer. I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you!&nbsp;Nozzle: 0.4Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Jade White At layer #13 (1.12mm) swap to Gray At layer #14 (1.2mm) swap to Jade White At layer #16 (1.36mm) swap to Charcoal At layer #19 (1.6mm) swap to Mandarin Orange At layer #22 (1.84mm) swap to Jade White for the rest.

Harry Potter Hogwarts Castle - HueForge

Hueforge

Think3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #10 (0.88mm) swap to Gray At layer #13 (1.12mm) swap to Jade White At layer #21 (1.76mm) swap to Black At layer #23 (1.92mm) swap to Red for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

Hakuna ma Pokeball - HueForge

Pokémon Hueforge

Mephis

Zelda magnet&nbsp;Need 2 Magnets 10 x 2 mm

Magnet Zelda

Video Game Art

RJ Design

<h3>Description</h3>The Design&nbsp;Here we here a Vortex made from Suspended filament.&nbsp;This is the Thick Rim Version for better adhesion&nbsp;The Original can be found here: <a target="_blank" href="https://makerworld.com/en/models/472351#profileId-384944" rel="nofollow noopener">https://makerworld.com/en/models/472351#profileId-384944</a>&nbsp;The cylinder is approximately 100mm in diameter&nbsp;This looks great and shows off the capabilities of your Printer.&nbsp;&nbsp;Printing&nbsp;After a couple of people have had bed adhesion issues with the original, I&#39;ve added this thicker rim, this should increase the surface area on the bed and increase bed adhesion.&nbsp;Slice with the Arachne wall generator. ensure layer thickness is at 0.2mm&nbsp;Once printed let the build plate cool. The base is fragile - take extra care when remove from the build bed.&nbsp;Occasionally a filament line may fail. I recommend careful plucking it out - it won&#39;t affect the overall look.&nbsp;&nbsp;&nbsp;My WorkAfter many years in Engineering, I&#39;ve just decided to try and follow my childhood dream of becoming of a Creative Designer.A Creative Designer of what? No idea! Right now I really like puzzles, mechanisms and kinetic sculptures so that&#39;s where I&#39;m going to focus my efforts.

Suspended Filament Vortex - Thick Rim

2501exe

I present the Ultidex Cube: Spartan and Square Edition. Included within are: -Spartan Rectangular Modular Card Box with 2 Rows for 1000+ cards of capacity or 8 100 card commander hardshells and toploader. Holds 24+ draft shells. -Square Cube System for 540+ Card Cube with 3 Row for 1000+ cards of capacity or 9 100 card commander hardshells and toploaders. Holds 24+ draft shells. - 60 and 100 Card (Sleeved or Double) Commander Style 2 Piece Snapping Hard Shell Deck Box -20 Card (Sleeved or Double) Draft Shells for use in Cube or Jumpstart Packs -Modular Inserts for Tokens, Dice and Cards -100 Card (Sleeved or Double) Standing Insert -50 Card (Sleeved or Double) Standing Insert -2 Layer Card, Token or Dice Insert -3 Layer Card, Token or Dice Insert -Easy Flip Indexing Dividers -Jump Start Cut out Lid for Draft Shells -Dual Use Life Counters; One side Shows life from 0 to 99 for both players, the otherside has, creature token with counters, permanant token with counters or a +1/+1 -1/-1 counter. The system is highly modular and you're able to create your own organizational layout that would tailor fit your storage or cube needs. It is also highly compatible, able to take deck boxes such as the Ultimate Guard Boulder or Ultrapro Toploading Deck Boxes. Hopefully this system will be perfect for some TCG loving makers out there! Let me know if you have any requests to change, improve or add to the system!

The Ultidex Cube: Spartan and Square Edition: Modular Card System for MTG Cube Format and Other TCGs

cards stuff

kriswillcode

After seeing many people&#39;s problems with my <a target="_blank" href="https://makerworld.com/en/models/66672" rel="nofollow noopener">previous fidget switch&#39;</a>s spring, I decided to create a new variant that allows you to adjust the spring&#39;s tension whenever you want. Some days you may want a soft, tactile click; other days you may want a loud, snappy click - this fidget does both! And it even has a more ergonomic form factor!&nbsp;This little switch consists of just eight parts! And, just like my previous switch, you&#39;ll need to print two of some parts. The body of the switch also has two options, because who doesn&#39;t like choices?&nbsp;If you&#39;re looking for a fidget switch that has fewer parts, prints quicker, and uses less filament, check out my <a target="_blank" href="https://makerworld.com/en/models/467451" rel="nofollow noopener">Print-in-Place Fidget Toggle Switch</a>.&nbsp;<blockquote>⚠ Heads up, hot shot!This is a tricky print. This print has a few small pieces that don&#39;t work with brims. These have limited bed contact, so you&#39;ll need nearly perfect bed adhesion. Because of the small tolerances in this print, your flow rate must also be perfect. Finally, if your printer has any noticeable elephant&#39;s foot, then forget about printing this.</blockquote><h4> </h4><h4>Settings</h4><ul><li>Designed for a 0.4mm nozzle</li><li>0.16mm or 0.2mm layer height</li><li>3 walls</li><li>≥5 top/bottom layers</li><li>20% infill (but more feels better)</li><li>Slice with Arachne if available</li></ul>All files should be in the correct orientation to print. Supports are not required, but a brim will help when printing the pegs. I do not recommend using a brim on the springs as it&#39;s difficult to remove and any brim remnants will interfere with the action of the switch.&nbsp;<h4>What to Print</h4><figure class="table"><table><thead><tr><th>Part</th><th>Qty</th><th>Notes</th></tr></thead><tbody><tr><td>Body</td><td>2</td><td>There&#39;s two options: smooth or grip; print two of the same option</td></tr><tr><td>Peg</td><td>2</td><td>A brim helps here!</td></tr><tr><td>Spring</td><td>2</td><td>Don&#39;t use a brim on these!</td></tr><tr><td>Toggle</td><td>1</td><td> </td></tr><tr><td>Slider</td><td>1</td><td>A lower layer height is preferred here: 0.16mm or 0.12mm</td></tr></tbody></table></figure>&nbsp;<h4>Assembly</h4>The last 7 photos demonstrate the assembly process.<ol><li>Test your prints: Place the slider between the two body halves and verify the slider can slide freely. Then, place a peg in the toggle and verify the toggle can rotate freely.</li><li>Insert both pegs into one side of the body. These will be extremely tight (that&#39;s intentional!!!). If the pegs absolutely won&#39;t fit, you might need to reprint them with the X and Y scale reduced by 0.2 to 0.4% (99.8 to 99.6%).</li><li>Place the springs into the slider and check the orientation: the &#34;arms&#34; of the springs should point towards each other, and the &#34;bump&#34; on the slider should point towards the arms.</li><li>Move the slider towards the rounded ends of the springs and carefully press the springs into the body half from step 2. The springs should be parallel with the bottom of the body.</li><li>Move the slider away from the rounded ends and slip the toggle on the peg. Use a finger to separate the springs for easy placement.</li><li>Check the motion of the slider and the toggle. If everything looks good, place the other half of the body on top and press the two body halves together. Be sure the springs are properly aligned into their respective slots.</li><li>You&#39;re done! Flick away!</li></ol><h4> </h4><h4>Protips</h4><ul><li>This switch is not designed to be disassembled, so good luck with that.</li><li>A drop of lube between the toggle and the peg works great depending on your filament(s).</li><li>A small amount of beeswax applied to the outside of the springs helps if you find the slider difficult to move. But, the slider may shift during some intense switch flipping.</li><li>The pegs require some force to properly insert, but they have to hold the switch together. No other part (e.g. the springs) should require any significant force.</li><li>If you&#39;re rocking an AMS, use &#34;Others &gt; Print sequence &gt; By object&#34; to quickly print all parts on one build plate while using different filaments!</li></ul>&nbsp;If you print one of these switches, please post a make: I love seeing all of your creative color combinations!

Adjustable Fidget Toggle Switch

Fidgets

Whopper Printing

Introducing my most complex model yet—the Print-in-Place Scissor Lift! This model is expertly designed to print entirely without support or assembly, showcasing the latest advancements in 3D printing.Features:<ul><li>Threaded Screw Mechanism: Effortlessly raises and lowers the lift,</li><li>Functional Wheels: The wheels work, enabling the model to roll smoothly,</li><li>Easy Snap Base: Simply rotate the base as indicated by the arrow on the bottom, align it with the top piece, and snap it into place to complete the setup.</li></ul>IMPORTANT: Gently free up the joints before using the screw by gently pushing down on the top and then lightly pulling.<a target="_blank" href="https://www.instagram.com/whopperprinting/reel/C7J_oilLv2e/" rel="nofollow noopener">Video Example</a>&nbsp;Support Me:<ul><li>If you enjoy this model, please explore <a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">more innovative designs on my website</a> or <a target="_blank" href="https://www.patreon.com/whopperprinting" rel="nofollow noopener">consider supporting my work on Patreon</a>. Your support helps fuel further creativity! These models are difficult and time consuming to create, so any help is greatly appreciated!</li><li>Follow me on social media @whopperprinting for updates and more.</li><li>I&#39;d love to see your prints! Share your photos; it’s always exciting to see my designs come to life in your hands.</li></ul>Thank you for your support and happy printing!

Print-in-Place Scissor Lift (No Support Needed!)

Toys

KYZ Design

This model was originally uploaded <a target="_blank" href="https://www.printables.com/model/460255-hsw-single-walls-with-integrated-frame-and-fasteni" rel="nofollow noopener">here</a>, check it out for past makes and comments.&nbsp;Update 30/04/2023<ul><li>"HSW Single Wall - 11x7 HD" added</li><li>“HSW Test Wall HD” added</li><li>All files renamed</li></ul>----------------My new Honeycomb Coffee Wall just needs one section of the Honeycomb Storage Wall, and I found the regular wall pieces to be too flexible and asymmetrical for my liking, so I made one with:<ul><li>Integrated borders, making the piece much more rigid and have higher weight capacity</li><li>Mounting holes on the rigid frame for secure attachment, and so you don't have to use any of the hexes,</li><li>Mountable with double sided tape,</li><li>And most importantly… Symmetry.</li></ul>SizesI just needed the big one but I made a few extra sizes for you guys to print on smaller printers as well as smaller work spaces. The first size number denotes number of cells horizontally and the second size number denotes number of cells vertically so size 11x9 means 11 cells wide, 9 cells high.Thicknesses<ul><li>Standard Duty (SD) 8mm thick</li><li>Heavy Duty (HD) 10mm thick - warning, all inserts will fit very snug as the cell walls are more rigid</li></ul>MountingScrew on with "Gauge 6" or 4mm countersunk head screws. The piece is 8mm thick so 16mm or 20mm screw will be suitable to mount to timber.Mounting is also possible with double sided tape (such as 3M VHB tape) - particularly good if you want to mount to bathroom/kitchen tiles. If you plan to tape this on and want to remove any of the screw holes, make an 8mm thick cylindrical “add part” modifier and place on top of the hole. (I would leave the holes there in case you change your mind or move it)Enjoy!&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my Gridfinity models.&nbsp;&nbsp;

HSW Single Walls - With Integrated Frame and Fastening Points (Honeycomb Storage Wall)

Tools

MakerJoe

PTFE Tube Protector&nbsp;Here is my PTFE tube protector for your bambu printers. It´s protecting against wearing out your ptfe tube rubbing on the top glas. The difference to others is it´s circular design protects the tube from every angle, even when the protector is turned upside down.&nbsp;Advantages:<ul><li>Protects your ptfe tubes from wearing out rubbing at the top glas</li><li>Easy to install and fits tight around the ptfe tube</li><li>Even if it rotates it still protects from any angle</li><li>Printed in under 10 mins</li></ul>Assembly:<ul><li>Just snap on the ptfe tube. My reccomendation is to install 2 or 3 of them like on the photo, so you got ptfe protection wherever the printhead is located.</li><li>Please take care that you don´t puncture your ptfe tube on installation</li></ul>Notes:<ul><li>Due to different print filaments or ptfe tube thicknesses there might be a need for resizing. My model is designed for the bambu stock ptfe tubes and bambu pla basic filament.</li><li>I don´t reccomend TPU as this causes to much friction on the glas</li></ul>&nbsp;Check also out my EZ AMS Helper: <a target="_blank" href="https://makerworld.com/en/models/99682" rel="nofollow noopener">https://makerworld.com/en/models/99682</a>

PTFE Tube Protector

Upgrades

Kryator

Me and my kid love Pokemon and were looking for something fun and easy to print that we could collect. I came upon the Pokemon coin models by @joeythatoneguy , which reminded me of the TCG coins and loved it, but only a few Pokemon were available. So I decided to create my own expanded collection and model other fan favorite Pokemons.Recommendation: print base in Matte black and the upper ring use Silk in the color you desire, to get the best look.

Vulpix Pokemon Coin

Pokemon

Kubikossi

<h2>New Universal Spool v2 released! <a target="_blank" href="https://makerworld.com/de/models/125311#profileId-135347" rel="nofollow noopener">Click here</a>!</h2>&nbsp;Universal spool for using filament on cardboard spools or Refill Packs (like eSun Refill Filament) in the Bambu AMS. No rewinding necessary, simply transfer the cardboard or refill core to the universal spools. Suitable for core diameters (inside) from 75 to 100mm. With Jayo spools, it is a little tricky to remove the rather thick ring at the core. You need a sharp cutter and patience.<a target="_blank" href="https://youtu.be/YNShKH9P1Qs?si=-JpmYJoZzH9Go-eM" rel="nofollow noopener">Check out my new video with a steb by step tutorial.</a><ol><li>Measure the width of the cardboard spool (inside between the reels). </li><li>Carefully remove one side of the cardboard spool. </li><li>Screw the corresponding core (50, 55 or 60mm width) onto a reel and insert it into the cardboard core.</li><li>Then turn over and remove 2nd side of cardboard reel.</li><li>If desired, then insert Silicatube (with silica gel or ballast).</li><li>Then screw on second roll, done.</li></ol>Now the filament can be used in the AMS without any problems. I made 2 designs of the reels, design nr. 2 needs less printing time. I use PLA (it is flexible enough for the core) with these settings: 3 walls 3 top and bottom layer 12% Gyroid Infill 0,16mm layerhigh (with variable layerhigh for the reels if you want)&nbsp;22.11.2023&nbsp;added the new v2 Cores (as Print Profile)<figure class="image image_resized image-style-side" style="width:37.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/797328/2023-11-22_2f2f7f0bccecd.jpg"></figure> The number of spiral arms was reduced from 4 to 3, while the diameter was increased from 110 to 117 mm. This means that the spools sit even better and less material is used, which also reduces the printing time slightly.&nbsp;The v2 Core with 60mm was tested by me with various filament and is therefore compatible with the following cardboard spools:<ul><li>Creality</li><li>eSun</li><li>GratKit</li><li>Kexcelled</li><li>Overture</li><li>Sunlu</li></ul><figure class="image image_resized image-style-side" style="width:37.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/797328/2023-11-22_61966bfd41a5d.jpg"></figure>&nbsp;Not yet tested, but should fit:<ul><li>Eryone</li><li>Bambu Lab Refill</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;17.10.2023 <ol><li><a target="_blank" href="https://makerworld.com/en/models/43852#profileId-45166" rel="nofollow noopener">new rewind core</a>. With this new core it is now possible to rewind filament with my universal spool, e.g. from a cardboard spool or a 3kg spool.</li></ol>&nbsp;02.10.2023<ol><li>added a &#34;Core Jayo 85-55&#34; especially for Jayo Spools. It&#39;s slightly smaller than the normal 100-55 Core.</li><li>reworked the silica-top, the thread now runs more easily.</li><li>updated the 3mf-File</li></ol>

Universal Spool for Bambu AMS

Spool Upgrades

blecheimer

Describtion: There are a lot of AMS risers on makerworld and I looked at all of them. Most of them have the same issue: They are large, beefy and need supports to be printed - that means lots of filament are necessary. I wanted a riser, that uses less than one spool of filament, is very robust, lets me open the top cover so that it stays open for ventilation, has a sufficent opening at the top to work on the printhead and of course has enough room for the AMS. So I designed my own AMS riser. It is so robust that I can stand on it. With my print settings (see below) it uses 840gr filament and can be printed in about 24 hours. All my settings and the part arrangement on five plates is included in the 3MF file. A step file for your own modifications or remixes can also be downloaded.&nbsp;Dimensions: 409 x 369 x 87 mm 840 gr&nbsp;Material: I recommend a sturdy filament like PLA, PLA+ or PLA-CF. Maybe PETG will work but the stationary tensile strength of PLA is just higher. I have chosen PLA-CF from Eryone because I always wanted to try it.&nbsp;Print settings: You can find my settings in the 3MF file together with the part arrangement on five plates. With my settings the print time is about 24 hours and you will need 840gr filament. for the parts: 4 walls 5 tops 5 bottoms 25% adaptive cuboid infill 0.2mm layer height no support for PLA-CF (Eryone) Nozzle: 0.4 mm Nozzle-Temp: 225°C Bed-Temp: 60°C Cooling: 100% @ second layer onwards Volumetric Speed: 12 mm³/s Outer Wall: 150mm/s Inner Wall: 250mm/s Infill: 200 mm/s Top Surface: 150 mm/s Bridge: 50 mm/s&nbsp;Assembly: Put the parts of the lower half together using the provided connectors. I highly recommend that you use superglue or 2K expoy on the part interfaces for extra stability. Do the same with the top. Then slide the top half on the lower half and secure it with glue. The designed gap between the parts is 0.15mm - that should be no problem for a Bambu printer.&nbsp;&nbsp;Disclaimer: This work by blecheimer is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by-nc-sa/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY-NC-SA 4.0</a> You are not allowed to copy this model to other 3D printing websites without my permission.

Robust AMS Riser - printable without support

AMS Upgrades

Kakeru Cobo

<div><h1>Summary</h1><div>For the support test section, use the paint support function to set up the support as shown in the image and check the removability of the support and the cleanliness of the support surface.サポートテストの部分のみペイントサポート機能などで画像のようにサポートを立て、サポートの剥離性やサポート面の綺麗さを確認してください。</div></div>

*Next-gen* Mini 3D Printer Test

tests

Michael Rechtin

&nbsp;Full Build Detailed in Youtube Video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=h6chNEaXb-o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/h6chNEaXb-o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Hardware List: (Affiliate Links) Motors: <a target="_blank" href="https://amzn.to/4c5N0SW" rel="nofollow noopener">https://amzn.to/4c5N0SW</a> Flight Controller: <a target="_blank" href="https://amzn.to/43eu3ZS" rel="nofollow noopener">https://amzn.to/43eu3ZS</a> DJI O3: <a target="_blank" href="https://amzn.to/431EGiR" rel="nofollow noopener">https://amzn.to/431EGiR</a> 2mm Bullet Connector: <a target="_blank" href="https://amzn.to/3In6B3l" rel="nofollow noopener">https://amzn.to/3In6B3l</a> LEDs: <a target="_blank" href="https://amzn.to/3uV63hX" rel="nofollow noopener">https://amzn.to/3uV63hX</a> Props: <a target="_blank" href="https://amzn.to/3IpEkc9" rel="nofollow noopener">https://amzn.to/3IpEkc9</a> 4s 1300mah Batteries: <a target="_blank" href="https://amzn.to/436hHmL" rel="nofollow noopener">https://amzn.to/436hHmL</a> M4x12 Bolt: <a target="_blank" href="https://amzn.to/3T6co23" rel="nofollow noopener">https://amzn.to/3T6co23</a>&nbsp;FPV Equipment (Other products may be able to be substituted): RC Controller: <a target="_blank" href="https://amzn.to/3VbpZYy" rel="nofollow noopener">https://amzn.to/3VbpZYy</a> FPV Goggles: DJI FPV Goggles V2

100MPH FPV Race Quad

Probably Never going to Print

ItzzJulpra

Battery holder in shape of beer crates, AA and AAA optionAA holds up to 12 batteriesAAA holds up to 20 batteries