FSNmods

VK3DP

UPDATE check below.&nbsp;This is a remix from Billrobland's Chain links for logo's.&nbsp;I made the drawing new in Fusion and made a few changes.&nbsp;Put the last 2 links together then spin one link around and pull the 2 links attached to the center link past eachother this allows the chain links to not come apart.&nbsp;UPDATEI added 2 more different Chainlinks, that can be combined with my chainlink designs.Check out <a target="_blank" href="https://makerworld.com/en/models/219841#profileId-238468" rel="nofollow noopener">https://makerworld.com/en/models/219841#profileId-238468</a>  and <a target="_blank" href="https://makerworld.com/en/models/221926#profileId-240248" rel="nofollow noopener">https://makerworld.com/en/models/221926#profileId-240248</a> &nbsp;More variation of chainlinks = more fun

Logo Chain

Signs

Eminent3D

My take on a box to hold extra parts and nozzles for the A1/A1 mini. Inspired by my original Bambu Parts Box, it is also print in place and fits on the A1 mini bed. The print requires (8) 8mm x 4mm magnets. I have included an STL for a 1mm spacer for those who have or want to use 8mm x 3mm magnets. Just print 8 spacers and glue those in behind the magnets.&nbsp;The nozzles fit with or without the boots attached. the inner lid keeps the top closed as not to spill out anything you have within. &nbsp;Enjoy!

A1/A1 Mini Parts Box (Print in place)

Bambu Mods

DigitalBird

<figure class="media"><div data-oembed-url="https://youtu.be/-sKaSG1KhR0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/-sKaSG1KhR0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Digital Bird PTZ plus wifi controller for filmmakers. All the features you will find on the compact controller with the addition of live joystick camera control for up to four live camera systems while at the same time controlling unlimited automated camera systems set up using the A-B function or six key sequencer.A camera system can consist of any number of Digital Bird components, for example it may be a pan tilt head mounted on a slider or simply a camera mounted on a pan tilt head and a tripod.Whatever the configuration, the PTZ plus control can control up to 4 live systems.Up to 9 PTZ pre-set poses can be stored for each camera system. All recorded keys and positions are stored even when the system is powered down allowing you to setup your system long before the event power it all down to save on batteries. Power it up again when required with all your setups ready to go.<h4>The controller offers 5 input devices.</h4>⦿ The Nextion touch display to control system setup and all the other functions⦿ A three axis joystick which controls Pan, Tilt, Slid, and on/off function button⦿ A second two axis joystick to control zoom/focus⦿ An acceleration control knob which allows you to quickly adjust how smoothly your system performs its moves as it performs them.⦿ An LED play button for more tactile control of recording.The PTZ plus system uses the same NP style batteries used everywhere else on the system together with an external power jack for 7.5V supply.<h4>WIFI range</h4>In my admittedly not very scientific testing I would put the reliable unobstructed range of the system at between 50 and 100 Meters with no packet loss. In doors the system worked just fine between two rooms with a traditional plaster on brick wall between which is in keeping with the findings of others using the ESP_Now system without the use of external antennas. It is always wise to check how your equipment works at the filming location well before you find out there may be a problem. This is true for any WIFI dependent devices. I have personally used the system in a hall with an audience of more than 300 smart phones with no problems.The addition of the PTZ plus controller is just one more feature ensuring that the Digital Bird system remains the most affordable feature rich DIY camera motion control system anywhere on the internet.Note:In order for the controller to work all parts of your system must be running the same version of the digital bird firmware downloadable free from GitHub together with quick start manuals.&nbsp;System Links:<ul><li>Component Kits: <a target="_blank" href="https://digital-bird-motion-control.myshopify.com" rel="nofollow noopener">https://digital-bird-motion-control.myshopify.com</a></li><li>Software: <a target="_blank" href="https://github.com/digitalbird01/DigitalBird-Camera-Slider" rel="nofollow noopener">https://github.com/digitalbird01/DigitalBird-Camera-Slider</a></li></ul>&nbsp;Last Part Update 1st March 24<ul><li>Updated the parts to provide better seat for small joystick</li><li>The screen Bezel is no longer glued in place but slides in from the side</li></ul><h3>Print Settings</h3>&nbsp;Rafts:NoSupports:YesInfill:25- 100% depending partFilament: Matt PLANotes:I printed the base at 35% fill the screen bezel at 100% at the rest of the parts at 25% fillCategory: Camera

PTZ plus Camera motion Control

Camera Stuff

Carman3D

Functional 3D Printed Mill&nbsp;Purchased components are listed below, these are McMaster-Carr part numbers with the exception of the router which I purchased on Amazon. You could definitely source cheaper hardware, but the bolts that are labeled (Fully Threaded) need to be. The router is just a cheap one so you may want a better router, or already have one. I included a step file of that part so that you can modify to fit another router.&nbsp;When assembling I would recommend tapping the ½-13 holes if you have a tap, I was able to assemble without it, but it took some working back and forth to make it smooth, and WD-40 can help as well. The second one I built I tapped the holes after printing and it made it a lot easier.&nbsp;½-13 Hex Head Bolts&nbsp;(2) 92800A407 - 10” Long (Fully Threaded)(10) 92240A715 - 1-1/2” Long (Comes in 10 pack)(1) 92800A408 - 12” Long (Fully Threaded)(1) 92240A740 - 8” Long (Fully Threaded)(1) 92240A728 - 4” Long (Fully Threaded)(4) 92240A710 – ¾” Long (Comes in 10 pack)&nbsp;3/8-16 Hex Head Bolts&nbsp;(4) 92240A622 – ¾” Long (Comes in 25 pack)&nbsp;1/2-13 Socket Head Cap Screw&nbsp;(1) 91251A722 - 2-1/2” Long (Comes in 10 pack)&nbsp;Set Screw Shaft Collar&nbsp;(3) 9414T11&nbsp;Routerhttps://www.amazon.com/dp/B094VSC1GT?ref=ppx_yo2ov_dt_b_product_details&th=1

Functional Vertical Milling Machine

Tools

Jonas_H

If you like plants, lights and 3D printing then this could be a nice project for you.This print is a plant pot that combines all these things together in one thing - a glowing plant pot.&nbsp;The special thing is that you can change the inner look from the plant pot when you cahnge the type and density of the infill pattern. You can review these changes in the slicer when you temprarely set the wall loops to zero. In the uploaded print profile you can find the variants that are pictured in the photo section.&nbsp;As a light strip I have used these 10m long ones from Amazon: <a target="_blank" href="https://amzn.to/42NRtFl" rel="nofollow noopener">https://amzn.to/42NRtFl</a> (this is an Affiliate Link. When you order with this Link I get a small provision and that helps to support my work)&nbsp;As filament I have used a transparent PETG Filament for the part A and matte black PLA Filament for part B and C.&nbsp;The assembly is pretty straight forward.The first step is to insert the whole LED strip through the hole onto the plant pot.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/585393/2024-02-18_e94e7cce8eb11.png">&nbsp;In the next step you can fix the end of the LED strip with some tape to the inner plant pot (part B). Now simply roll on the whole LED Strip to the inner plant pot.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/585393/2024-02-18_f7d992e3c29dd8.png">&nbsp;When this is done fix the other end to the inner plant pot with some tape. Now you can insert the inner plant pot into the outer part. If you want you can glue the two parts together.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/585393/2024-02-18_6193c0b3c5fff8.png">&nbsp;Now you are finished. If you have any questions or improvemnt sugestions please leave them in the comments. I would be more then happy to answer them.&nbsp;Happy printing :)

The glowing PlantPot

Planters

Balazs

A thread test block for normal Metric threads. You can see if your printer is capable of printing threads. If the threads are good, you can use it later as bolt measuring tool too.The v2 version uses a thicker marking to be more printable.

Metric thread testblock

Screws & Bolts

DutchWorkX3D

This is the Chromance led wall design designed by Zack Freeman, as it is only on Thangs (free) and I added parts I designed myself I am posting it here.<figure class="media"><div data-oembed-url="https://youtube.com/shorts/35vRHPVXdcA?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=35vRHPVXdcA"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/35vRHPVXdcA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure><img src="https://makerworld.bblmw.com/makerworld/draft/470998/2024-01-30_81ceb1e280a238.jpg"> The design for the main connectors (top center, left and right) is original, the junctionbox at the bottom and the led channels and diffusers are my own design.<img src="https://makerworld.bblmw.com/makerworld/draft/470998/2024-01-30_27dcea0a3ff94.jpg"> If you follow the <a target="_blank" href="https://voidstar.dozuki.com/Guide/Chromance+Assembly+Instructions/6#s46" rel="nofollow noopener">manual</a> according to what Zack Freeman made from step 1 to 7 and continue with step 8 below. 8. Program the ESP32 with <a href="install.wled.me" rel="nofollow">WLED</a>9. Connect power supply to ESP32 and Ledstrips 10. Hang it onto the wall and have fun playing with it :-)&nbsp;If you have any questions, please let me know. Materials needed (note that you can print the led channels and diffusers so you don't have to buy those):This is what I used.<ul><li><a target="_blank" href="https://www.amazon.nl/dp/B074RG86SR?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">ESP32</a></li><li><a target="_blank" href="https://www.amazon.nl/dp/B0C5R4MFTC?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">WS2812B Ledstrip 5m</a></li><li><a target="_blank" href="https://www.amazon.nl/dp/B093FTFZ8Q?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">DC Power Jack</a></li><li><a target="_blank" href="https://www.amazon.nl/-/en/CARLITS-Conductor-Extend-Tinned-WS2812b/dp/B08J7WKV6W/ref=sr_1_10?crid=SPAPJHU5GHA5&keywords=awg+20+wire+3+pin&qid=1706601647&sprefix=awg20+wire+3pin%2Caps%2C71&sr=8-10" rel="nofollow noopener">3pin AWG20 wire</a> </li></ul>

Signs

Bambu Mods

Camera Stuff

Tools

Planters

Screws & Bolts

LED Stuff