Ezidarap

LayerCake

Based on the excellent Gridfinity system by Zach Freedman Wiki: <a target="_blank" href="https://gridfinity.xyz/" rel="nofollow noopener">https://gridfinity.xyz/</a>&nbsp;Differeces from the standard design:<ul><li>The interface has an added 0.4 mm flat section on top.</li><li>The bottom chamfer has been extended for improved print bed adhesion.</li><li>The base units can be overwritten which breaks compatibility but can use all space available.</li></ul>Please do not share print profiles here that break compatibility. Label print profiles well according to their settings.<h3>Customization Options</h3>The basic customization starts at the width and depth of the base plate in gridfinity units. Additionaly margins can be added on all sides and the rounded outside corners can be configured or completely removed.On top of that the base units for the grid can be redefined. This will break compatibility with the standard gridfinity containers etc. but will allow for much more flexibility when filling a drawer completely with containers.An equally modifiable container can be found in my other models <a target="_blank" href="https://makerworld.com/en/models/25376" rel="nofollow noopener">here</a>.<h3>Notes</h3>The OpenSCAD file is licensed as MIT.Source files included.

Gridfinity Parametric Base Plate

GlennovitS 3D

<h3>Updates</h3>9. Nov 2023 - Added multiple new versions. Both with higher and lower angle (to fit more doors) AND all versions with a normal and a pointy version (where the tip is not rounded, to fit under doors with less space below)<h3>Description</h3>Want a minimalistic doorstop, that is easy to print and uses the material flexibility to lock the door in place - then look no further!<figure class="image image_resized image-style-align-right" style="width:357px;"><img src="https://media.printables.com/media/prints/623185/rich_content/aed7792d-4669-4877-908f-29c34302e360/thumbs/cover/800x600/jpeg/img_7500.webp"></figure><h3>Overview</h3>This doorstop comes in multiple sizes, and can be scaled to your liking. So give it a go, try it out, and if you want, print another one that is smaller/bigger, stronger or more flexible - to be the perfect fit for your door!<h3>Sizes</h3>The model comes in 24 versions now.It comes in 4 sizes: <ul><li>Small</li><li>Medium</li><li>Large</li><li>X-Large</li></ul>There are also 3 angles to fit different space below different doors:<ul><li>Low angle</li><li>Default</li><li>High angle</li></ul>And there are 2 styles of the tip<ul><li>Default (rounded at the tip)</li><li>Pointy (to fit under very tight spaces)</li></ul>All of the versions are 40 mm in width as standard, but can be scaled up and down in the slicer (just scale the Z direction)<figure class="image image_resized image-style-align-right" style="width:357px;"><img src="https://media.printables.com/media/prints/623185/rich_content/651b871f-7bc6-4796-b668-67954adf6f8b/thumbs/cover/800x489/png/skaermbillede-2023-10-22-kl-232657.webp"></figure><h3>Print instructions</h3><ul><li>Speed on first layer: 50% (To ensure good bed adhesion)</li><li>Infill: 0% (to make the model 'springy’)</li><li>Top/bottom layers: 0</li><li>Perimeters: 2-3 (try out different combinations - the ‘springyness’ is very depending on this parameter AND the material of your choice!)</li></ul>You can also to a stylised version with exposed infill if you like that look. Makes the model less flexible, but more stylised - your choice.<ul><li>Infill: 5-15%</li><li>Infill pattern: Honeycomb (or gyroid or whatever you like the best!)</li></ul>Happy printing!&nbsp;<h3>Want to show your support?</h3>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D</a>

Box

Utilitaire