Evil Clown 3DIY

Penguin_holic

<div><h1 class="thing-component-header summary summary">Summary</h1><div>(in English) This case integrates a 1.3&#34; OLED and rotary encoder into a Raspberry Pi 3B case.The connection with Raspberry Pi was referred from here. <a href="https://github.com/seya128/Voron0.1_skirt_OLEDandRotaryEncoder" rel="nofollow">https://github.com/seya128/Voron0.1_skirt_OLEDandRotaryEncoder</a>1.3 inch OLED <a href="https://vi.aliexpress.com/item/1005003484018034.html?channel=twinner" rel="nofollow">https://vi.aliexpress.com/item/1005003484018034.html?channel=twinner</a> Rotary encoder <a href="https://vi.aliexpress.com/item/33039321968.html?spm=a2g0o.order_list.order_list_main.64.39b81802mtDJRT&amp;gatewayAdapt=glo2vnm" rel="nofollow">https://vi.aliexpress.com/item/33039321968.html?spm=a2g0o.order_list.order_list_main.64.39b81802mtDJRT&amp;gatewayAdapt=glo2vnm</a>Caution. Individual OLEDs and encoders may have different hole positions, so please edit the STEP file to adjust. Please use at your own risk as the temperature of the Raspberry Pi may increase. (I will UPDATE so that the fan can be installed before summer arrives in my area)I also made a mount to attach the Raspberry Pi case to the Ender3V2/S1 LCD stand together <a href="/thing:5846683" rel="nofollow">https://www.thingiverse.com/thing:5846683</a>(in Japanease) ラズベリーパイ3Bのケースに１．３インチのOLEDとロータリーエンコーダーを一体化するケースです。ラズベリーパイとの接続はこちらを参考にしました。 <a href="https://github.com/seya128/Voron0.1_skirt_OLEDandRotaryEncoder" rel="nofollow">https://github.com/seya128/Voron0.1_skirt_OLEDandRotaryEncoder</a>1.3インチOLED <a href="https://vi.aliexpress.com/item/1005003484018034.html?channel=twinner" rel="nofollow">https://vi.aliexpress.com/item/1005003484018034.html?channel=twinner</a> ロータリーエンコーダー <a href="https://vi.aliexpress.com/item/33039321968.html?spm=a2g0o.order_list.order_list_main.64.39b81802mtDJRT&amp;gatewayAdapt=glo2vnm" rel="nofollow">https://vi.aliexpress.com/item/33039321968.html?spm=a2g0o.order_list.order_list_main.64.39b81802mtDJRT&amp;gatewayAdapt=glo2vnm</a>注意 OLEDやエンコーダーは個体差で穴の位置が違うことがあるのでSTEPファイルを編集して調整してください。ラズベリーパイの温度が上がる可能性があるので自己責任で使用してください。 OLEDやエンコーダーは個体差で穴の位置が違うことがあるのでSTEPファイルを編集して調整してください。 ラズベリーパイの温度が上がる可能性があるので自己責任で使用してください。 （私の地域の夏が来る前にファンを取り付けできるようにUPDATE予定です。）Ender3V2/S1のLCDスタンドにラズベリーパイケースを取り付けるマウントも一緒に作成しています <a href="/thing:5846683" rel="nofollow">https://www.thingiverse.com/thing:5846683</a></div><h1 class="thing-component-header settings print-settings">Print Settings</h1>Printer Brand: <div>Creality</div> Printer: <div>Ender 3</div> Rafts: <div>No</div> Supports: <div>No</div> Resolution: <div>0.2</div> Infill: <div>15%</div> Filament: eSun ABS Green</div>

Raspberry Pi case with 1.3" OLED and  encoder

RASPBERRY PI CASES & CO.

enricoRE

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmDon't scale Z heightSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #20 (1.68mm) swap to Yellow for the rest.

Black Panther (HueForge)

HUEFORGE

Toto_W

Verbinder um 2 oder mehr IKEA Lack Tische übereinander zu bauen und fest zu verbinden

IKEA LACK -> Stack 2 tables

IKEA

LMaker

&nbsp;Adjustable led bar neopixel for KP3s Pro, in this case it is a 5v rgb bar but you could put a different type of led stripI share the link to the led strip used. Its control is done by klipperYou can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación <a href="https://www.paypal.com/paypalme/lozatapia1910" rel="nofollow">Click to danate</a><h4>Bill of materials:</h4><ul><li><a href="https://s.click.aliexpress.com/e/_DBDz3CP" rel="nofollow">LED RGB ws2812b IP30 60leds</a></li><li>2 units <a href="https://s.click.aliexpress.com/e/_AniBkt" rel="nofollow">T- Nuts 20 M3</a></li><li>3 units -- <a href="https://s.click.aliexpress.com/e/_AekMif" rel="nofollow">Self-Locking Cable Ties 2,5x100 mm</a> </li><li>2 units - <a href="https://s.click.aliexpress.com/e/_Dm71aOj" rel="nofollow">Screw ISO 7380 M3x8</a></li></ul><h4>Print parts</h4><ul><li>1 unit - Led_Pro.stl</li></ul><h3> </h3><h3>Assembly instructions</h3>&nbsp;<h4>1. Assembly the t-nut and screws</h4><ul><li>2 units - <a href="https://s.click.aliexpress.com/e/_Dm71aOj" rel="nofollow">Screw ISO 7380 M3x8</a></li><li>2 units <a href="https://s.click.aliexpress.com/e/_AniBkt" rel="nofollow">T- Nuts 20 M3</a></li><li>1 unit - Led_Pro.stl</li></ul>&nbsp;<figure class="image image-style-align-center image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/865326370/draft/2023-09-22_zsh7oznzmzqa.jpg"></figure><figure class="image image-style-align-center image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/865326370/draft/2023-09-22_fuv9oegrmg7i.jpg"></figure>&nbsp;<h4>2. Stick the led strip to the support</h4><ul><li><a href="https://s.click.aliexpress.com/e/_DBDz3CP" rel="nofollow">LED RGB ws2812b IP30 60leds</a> (10 leds - 160mm)</li></ul><figure class="image image-style-align-center image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/865326370/draft/2023-09-22_heco9q09rip8.jpg"></figure>&nbsp;<h4>3. Fit the self-locking cable ties</h4><ul><li>1 unit -- <a href="https://s.click.aliexpress.com/e/_AekMif" rel="nofollow">Self-Locking Cable Ties 2,5x100 mm</a> </li></ul><figure class="image image-style-align-center image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/865326370/draft/2023-09-22_ninbxvme4961.jpg"></figure>&nbsp;<h4>4. Fit the self-locking cable ties on led strip (optional)</h4><ul><li>2 units -- <a href="https://s.click.aliexpress.com/e/_AekMif" rel="nofollow">Self-Locking Cable Ties 2,5x100 mm</a> </li></ul><figure class="image image-style-align-center image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/865326370/draft/2023-09-22_bd736i4yv4jj.jpg"></figure>&nbsp;<h4>5. Place the wiring in the indicated position (under the t-nut)</h4><figure class="image image-style-align-center image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/865326370/draft/2023-09-22_pthxqxfl8xk5.jpg"></figure>&nbsp;<h4>6. Put the assembly on the printer profile and fix it with the screws</h4><figure class="image image-style-align-center image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/865326370/draft/2023-09-22_zp9eck6bxsxl.jpg"></figure>&nbsp;<h4>7. Pull the end of the cable to place it</h4><figure class="image image-style-align-center image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/865326370/draft/2023-09-22_4cykqe0qe2vr.jpg"></figure>&nbsp;<h4>8. Connect the led strip to the board, pin PB2</h4><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/865326370/draft/2023-09-22_kfpxdxk8zq06.jpg"></figure>&nbsp;<h4>9. Set up your klipper</h4>&nbsp;<pre><code>############### LEDS ########[neopixel Disco]pin: PB2# The pin connected to the neopixel. This parameter must be# provided.chain_count: 10# The number of Neopixel chips that are "daisy chained" to the# provided pin. The default is 1 (which indicates only a single# Neopixel is connected to the pin).##color_order: GRB# Set the pixel order required by the LED hardware. Options are GRB,# RGB, GRBW, or RGBW. The default is GRB. SET_LED LED=Disco RED=0.093 GREEN=0.051 BLUE=0.093initial_RED: 0.25initial_GREEN: 0.25initial_BLUE: 0.25# Sets the initial LED color of the Neopixel. Each value should be# between 0.0 and 1.0. The WHITE option is only available on RGBW# LEDs. The default for each color is 0</code></pre>&nbsp;<h4>10. Enjoy</h4>&nbsp;&nbsp;&nbsp;

Kingroon KP3S Pro -- Adjustable led bar Neopixel

KINGROON 

Max629

Da mich die vielen Späne die beim Fräsen mit meiner neuen TTC450 entstehen genervt haben. Habe ich kurzerhand diese Absaugung realisiert. Benötigte Materialien:<a target="_blank" href="https://www.amazon.de/hz/wishlist/ls/2T0OX2MRF9LAV?ref_=wl_share" rel="nofollow noopener">https://www.amazon.de/hz/wishlist/ls/2T0OX2MRF9LAV?ref_=wl_share</a>Für den kurzen Schlauch der von Fräsmotor zur Seite geführt wurde habe ich etwa 1,2m verwendet.&nbsp;&nbsp;

Twotrees TTC450 Absaugung 

maegu_

Hummingbird Silhouette Wall Art&nbsp;The Flower to this can be downloaded here : <a target="_blank" href="https://makerworld.com/de/models/99403#profileId-105975" rel="nofollow noopener">https://makerworld.com/de/models/99403#profileId-105975</a>&nbsp;

Wall Art - Hummingbird Silhouette

LASER

MEAF designs

Say bye to boring afternoons with this amazing maze game! This will not only challenge your solving capabilities but also your collaboration and coordination skills with other people.&nbsp;It consists of a game for two people, where the objective is to take the marble from the initial point to out of the board but you must do it by pulling the corners through a rope to tilt the board and take it through the entire route. <figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_4crfxnliq8st.gif"></figure>&nbsp;&nbsp;Once you achieve it, you can increase the difficulty by changing one of the ropes and pulling in a cross, or trying to do it in the shortest possible time.&nbsp;<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_tcqmrkplsgno.png"></figure>&nbsp;I have designed this for a 6mm ball bearing, and the max build volume of an ender 3 or similar. so you will be able to print it in almost any printer&nbsp;I´ve made 2 levels: <ul><li>level 0 = easy to achieve, with little travel. to familiarize yourself and learn </li><li>level 1 = with more travel and possible paths. ideal to compete and improve </li></ul>&nbsp;and I'm working on an even more difficult one, let me know if you'd like it. &nbsp;every level starst at the circular wall (there is only one in each), and you have to take the marble to the path until it leaves the board.if you achieve both levels you can use them in other ways, for example starting at each of the corners and taking the marble to the official start or official exit. doing so they practically become 3 versions each&nbsp;you will need:Printed parts1 - game board4 - poles1 - maze of any level you want&nbsp;Not printed parts4 - rope sections of 30cm each (you can use whatever rope you have on hand, from a shoestring to paracord. just make sure you don't use fishing line and pretty much anything can work)&nbsp;1- hot glue gun, 3D gloop, or any glue of your choice for pla or printed material&nbsp;to assembly you just need to glue the poles to the board, and then pass the rope through them to tie the maze at the other end. you can check the pdf for more datailed instructions. &nbsp;&nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,28 mm for board and holders. 0.2 for mazeNozzle diameter: 0,4mm or 0,6mmInfill: 12-15%Perimeters: 2Support: noif you want a multi color maze just insert a filament change at: 1mm&nbsp;&nbsp;you can check all my other designs here<a target="_blank" href="https://www.printables.com/@dgoalva" rel="nofollow noopener">dgoalva | Printables.com</a>&nbsp;&nbsp;&nbsp;

Party Maze challenge

SPIELZEUG, PUZZLES, TOYS

laisch

Clamp Holder for pegboard with 50x50mm raster and 8x15mm holesTo tighten the pin, you need a 3x18mm woodscrew

Clamp Holder - Pegboard 50x50x8mm

ORGANISATION, PEGBOARD

motor-fuzzi

Christmas is coming sooner than you think… Advents calender for "Kinderüberraschungs Ei" (kids surprise). Space for 24 eggs. Connect the doors and the container with a piece of filament. Of course you can also glue it together in different shapes.

Advent calendar Kinder Überraschung (Kids surprise)

WEIHNACHTEN, CHRISTMAS

RestoreDoctor

Update 15.10.2023New Top - less support requiredNew Lid - bigger hole for the screw and more weight that it closes itself (should be printed with 100% infill) - 2 Versions available one has a recess for an M10 nut with a wrench size of 17mm&nbsp;Size: diameter 100mm height about 170mmOrientation of the parts see below!Settings:<ul><li>0.20mm Standard</li><li>support needed</li><li>PLA / PETG</li><li>(Drill out the holes in the lid with a 3mm / 3.5mm drill no longer necessary with the new lid)</li></ul>Hardware:2x M3 x 16mm&nbsp;Orientation for assembling<figure class="image image_resized" style="width:41.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/459392/2024-01-27_f8ee382ab6fae.png"></figure>&nbsp;&nbsp;Orientation new Lid with auto tree support<figure class="image image_resized image-style-align-center" style="width:357px;"><img src="https://media.printables.com/media/prints/561643/rich_content/b4050278-d3ce-4072-a017-8c2cc6f998de/thumbs/cover/800x666/png/lid.webp"></figure>&nbsp;I used a support blocker for the holes<figure class="image image_resized image-style-align-center" style="width:357px;"><img src="https://media.printables.com/media/prints/561643/rich_content/e1aebad0-5ed6-4458-ab45-2fcf73ab32fa/thumbs/cover/800x713/png/support-blocke.webp"></figure>&nbsp;support only necessary under the holes<figure class="image image_resized" style="width:357px;"><img src="https://media.printables.com/media/prints/561643/rich_content/1e8f177f-68ca-4c4b-aea7-4576dad39908/thumbs/cover/800x734/png/support.webp"></figure>&nbsp;&nbsp;&nbsp;

Mini Desktop Trash Can

Tools Werkzeuge Werkstatt Shop

Update: 26.07.2023 - added feets without support to use your own settings in the slicer. Settings:<ul><li>0.20mm Standard </li><li>support needed </li><li>PLA / PETG </li></ul>Hardware:<ul><li>2pcs. M3 x 10mm Cylinder Head (hands)</li><li>2pcs. M6 x 10mm Cylinder Head (arms)</li><li>2pcs. M6 x 35 mm Cylinder Head (hinge)</li></ul>The supports for the drawer must be removed from the FEETS after printing - see below <figure class="image"><img src="https://media.printables.com/media/prints/504936/rich_content/33828916-0289-4448-94cc-3efca0f998cf/f39fe2f4-eceb-4f29-aab0-e56c3afd4f1f.webp"></figure>

Robot Desk Organizer

NÜTZLICHES - USEFUL

JDJDJD

<h2>Meet the Smoothy!</h2>The Smoothy is a PTFE Bowden Tube Y Connector designed for smooth filament transport without catching or binding. This allows you to use an external spool with your Bambu Lab machine without disconnecting your PTFE Bowden Tubes.&nbsp;PTFE tubes are inserted deep into the connector for less wear on the FDM material. This allows for silky smooth operation.&nbsp;As the filament progresses towards the output, it passes through a precisely-designed taper that mates perfectly with the output bowden tube.&nbsp;All PTFE tubes must be inserted until each “stop” is reached (see cutaway diagram).&nbsp;Connectors must be the black type (not blue). The black connectors allow the PTFE tube to “pass thru” which is required for the design to work smoothly: <a target="_blank" href="https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1</a>&nbsp;<h2>BENEFITS:</h2><ul><li>No Supports</li><li>No Overhangs</li><li>No Brims</li><li>Optimized Geometry</li><li>Designed for FDM Printing</li><li>Smooth Operation</li><li>Supports both PC4-M6 and PC4-M10 “pass thru“ connectors</li><li>Free to Download!</li></ul><h2>UPDATES:</h2><ul><li>The Smoothy Mount is now available! Download here: <a target="_blank" href="https://makerworld.com/en/models/18190" rel="nofollow noopener">https://makerworld.com/en/models/18190</a> The mount is not required, but available to those who prefer to attach the Smoothy to their machines. Without the mount, it can simply rest in-line.</li><li>Both PC4-M6 and PC4-M10 connectors are now supported.</li></ul><h2>TIPS:</h2><ul><li>Make sure ALL bowden tubes are FULLY inserted until each one reaches its stop point. See cutaway diagram for an illustration.</li><li>The output tube does not insert as deep as the input tubes.</li><li>After inserting each tube, you can rotate the tubes back and forth while pressing inward slightly to make sure they&#39;re seated squarely and fully.</li><li>Glue Stick is recommended.</li><li>PTFE tubes must be cut squarely at the tip (no angled tips).</li><li>All PC4 connectors must be installed for a completed design with smooth operation.</li><li>Tested with a 0.4mm Nozzle and 0.2mm Layer Height.</li><li>Print vertically with wide dual-port side on the bed.</li><li>PC4 connectors typically have tapered threads. As such, make sure you don&#39;t over-tighten them as they can create a “wedge effect” and can cause damage.</li></ul><h2>NOTES:</h2><ul><li>These work well printed in PLA. More durable materials can be used, but it may require clearance adjustments.</li><li>I’m currently using this for my Bambu Lab X1C with an AMS, which utilizes an external spool.</li><li>This is the first model that I&#39;m sharing, I hope you enjoy it!</li><li>The Smoothy can be used commercially, but can&#39;t be resold.</li></ul>

The Smoothy - Y Splitter Connector

BAMBU LAB ZUBEHÖR / BAMBU PARTS

nikola

<h3>Pixel Board</h3><figure class="image image_resized image-style-align-center" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_lon3dtlzddwb.jpg"></figure>&nbsp;Changes:&nbsp;2023-10-15: Fixed the case which had incosistent edge.&nbsp;___&nbsp;&nbsp;PixelBoard is, as the name implies, a board that you can put 3D printed small squares aka “pixels” in and use it as a decorative piece, the board is 24 pixels wide and 12 pixels tall. The compact overall design fits on pretty much every printer, including Prusa Mini. If you're wondering what kind of designs can be made with pixels and a board of this size, scroll down to the bottom for some design examples.I recently found a similar model to this, and I noticed it had a few design flaws - but due to its licensing which didn't allow any modifications (remixes), I couldn't make any improvements to it - so I made an entirely new project from scratch over the weekend, and you can remix, share, and adapt it in any way you want - STEP files are included as well!&nbsp;Since it's literally designed over the weekend and not used over a longer period, if you have any improvement suggestions, feel free to make a remix or to comment.&nbsp;It's designed from the ground up for FDM printing, no supports, or anything similar required. It makes (optional, but recommended) use of 6x3mm magnets to hold the board firmly in the case, and the case itself doubles as a storage - and can hold more than 4 times the number of pixels required to fill the entire board, all in 4 different compartments, so you don't have to search through piles of different pixels to find the color you want.&nbsp;I have printed all the files on my X1C using generic 0.2mm settings with different filaments I had lying around, but please before you print everything at once, see below for print instructions and fit test models.&nbsp;<h3>Required materials:</h3>&nbsp;<ul><li>Optional: four 6x3mm magnets. These will hold the board extremely well in place, so much so that I had to design a push pin to push the board from the back, this is ideal since the box doubles as storage, and you don't want to have 1000+ pins accidentally drop on the floor.</li><li>3D Printer with at least 165mm bed size width - Prusa Mini can fit and print this.</li></ul><h4> </h4><h4> </h4><h4>Parts and print settings</h4><h4> </h4><h4>Board</h4><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_79e71rpcqru4.jpg"></figure><h4> </h4>The board is printed using default settings of 0.2mm or lower, but there is no significant benefit of printing lower than 0.2. It requires no additional settings or anything else. Just make sure you're printing this with a dry filament to avoid any stringing which may lead to pixels not fitting quite well afterward.<h4>Pins</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_fx9bx521pug5.jpg"></figure>&nbsp;The Pins are all 5x5mm for the cube part, as the tolerances for this are built into the board directly, but the diameter of the cylinder part may vary from printer to printer, and based on what kind of fit you want. I've included the pins with the cylinder at the following diameters: 5.00mm, 4.98mm, 4.96mm, 4.94mm, 4.92mm, and 4.90mm. They all have the size in their name Pin500 is Pin with a diameter of 5.00mm, Pin492 with diameter of 4.92mm, and so on.You need 288 pins to fill the whole board, I've included files with 298 pins to have some spare. If your printer bed adhesion isn't that reliable, I'd recommend printing in smaller batches instead of everything at once.&nbsp;You can print these in 0.2mm layer heights as well. No brim is required, and if you use it then it might be difficult to remove afterward.So, how do you know which pin size to print?&nbsp;<h4>Fit Test Files</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_jjvpqn24uwh2.jpg"></figure>&nbsp;I've included a small 3x3 test board, print this, and all different pins and see which one fits best. If none of the pins fit, then you can, of course, use the scale feature of the slicer to adjust it, or modify the step files, but it means that your printer isn't quite accurate enough and this may lead to other issues as well. Use the same filament and same settings that you will use later on.For me personally, Pin498 fits the best.<h4>Case</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_qendaq3orl0u.jpg"></figure>&nbsp;The case requires no supports and is designed to be printed this way. You can use any layer height that you want. 0.2 layer height produces nice results, and especially with some sanding, can be pretty. There are no major structural demands here, other than the magnets that are held in place. &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_fwumhu5dey4w.png"></figure>Magnets/PushPin&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_7tw888ogds6s.jpg"></figure>If you decide to use magnets, you can put them in the side of the case, as well as the board, so they hold when the board is in place. There should be enough clearance to do a simple press fit for the magnets, bit if they keep falling out just add a drop of superglue.&nbsp;However, these magnets can be pretty strong, and getting the board out - when it's full of pins, can be very difficult, so I've designed a pin that goes from the front of the case to the back - make sure to put this in BEFORE you put the board in. The pins are pretty small, only 5 mm and barely noticeable, due to the small size, you'll need something to push them in from the back. If you don't want to deal with that, and you don't mind compromising on the design, there's also a long push pin version, this will stick out on the back 20mm and allow you to push it with your finger easily. Print both and try it out.The pins can be printed either way, and you don't need infill for them - 2 or 3 walls should do the trick.I printed mine in this orientation, so I get a smoother back-side finish. But this is up to you and how well your bed adhesion is. You can use brim on this to ensure it prints properly.<figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_wfahmznx9v0y.png"></figure>&nbsp;<h3>Assembly</h3>&nbsp;The assembly is pretty straightforward:&nbsp;<ul><li>Put the push pin in the case so you don't forget it.</li><li>Add magnets to the case and the board - make sure to orient them correctly</li><li>Done</li></ul>&nbsp;<h3>Design examples</h3>Besides the example image above, there are numerous designs that fit on a 24x12 board, here are some examples - and often you can even fit two of these on the board, or scale them down/up as you wish, as they don't use the entire space by themselves&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_kfdej6cryrvf.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_skdiiybul83w.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_pmm1qbz5sn0m.png"></figure>These screenshots come from <a target="_blank" href="https://www.brik.co/pages/gallery-search?q.size.height.min&q.size.height.max=12&q.size.width.max=24&q.size.width.min" rel="nofollow noopener">https://www.brik.co/pages/gallery-search?q.size.height.min&q.size.height.max=12&q.size.width.max=24&q.size.width.min</a>&nbsp;

Pixel Board

Lampen, Lamps

wuguigui

Updated 20230928I found the first version bent after standing on the table for 1 night, so I enhanced the back structure, I suggest using PLA tough or PLA+ to print the connection parts, the 4 boards using PLA basic are fine. Also when you print the 4 boards part, they have a probability of deformation after cooling from the hotbed, so you'd better to press them with a heavy object after printing.Recommended Filament: Bambu Lab <a target="_blank" href="https://shrsl.com/4duvx" rel="nofollow noopener">PLA Basic</a> or <a target="_blank" href="https://shrsl.com/4duvd" rel="nofollow noopener">PLA Tough</a>____________________________________________________________________________&nbsp;As the new A1 mini has been released, the “Bambu Filment Swatches” in the package of A1 mini Combo look so nice, but I don't like the way they stay together, so I designed a new frame to display them.&nbsp;To make all parts printable in small A1, I spent a whole night figuring out an idea to make it possible, all the parts can be printed without support. The swatch can be taken down easily because of the Inclined base design. You can also choose to mount it on the wall or put it on the table.&nbsp;See the images to get more information. If you like it, please give my design a like, and follow me, I will keep on designing more things.&nbsp;Have fun!<figure class="media"><div data-oembed-url="https://youtu.be/9_ne1zI8iBw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/9_ne1zI8iBw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-28_c0cfdeb595f03.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-28_4366a6bcc9301.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-28_ec15465091c93.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-29_e73e5f8ef218f.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-27_cd6b6f84e9f1b.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-27_e09c53cd22683.png"></figure>

Bambu Filament Swatches Frame

Drucker, Zubehör, Printer, Parts

FunkyArt

A few years ago I made this as a rendering for my kitchen backsplash. At some point I thought, why not print it out and put it on a shelf?It's a tribute to the legendary photo from the New York Times "Lunch atop a skyscraper" and of course Star Wars. Now what has always belonged together comes together ...&nbsp;If you don't want to waste so much material or have problems while printing, try cutting the model exactly in the middle of the support surface, like here (or use the halfcut profile):<figure class="image image_resized" style="width:100%;"><img src="https://media.printables.com/media/prints/474202/rich_content/745475e4-d756-4984-b39e-6e8470fef94b/thumbs/cover/800x477/png/unbenannt.webp"></figure><figure class="image image_resized image-style-align-center" style="width:99.69%;"><img src="https://media.printables.com/media/prints/474202/rich_content/ba54fb57-f598-4b31-9bf8-5d75aba81fbe/thumbs/cover/800x600/jpeg/image3.webp"></figure>This makes it an pretty easy print (use tree support!) I glued the legs and the surface with plastic glue, it holds perfect and the result looks quite good.<figure class="image image_resized image-style-align-center" style="width:99.15%;"><img src="https://media.printables.com/media/prints/474202/rich_content/60e8a19b-5c21-493e-8e4c-e9037d5b321b/thumbs/cover/800x600/jpeg/image0.webp"></figure><figure class="image image-style-align-center image_resized" style="width:98.8%;"><img src="https://media.printables.com/media/prints/474202/rich_content/5468c86b-fb99-4dea-9c33-e2af387fe6d8/thumbs/cover/800x600/jpeg/image0.webp"></figure>&nbsp;

Lunch atop a shelf (StarWars Troopers)

Figuren Roboter

Fixumdude

Introducing the FDM (Fixum Dude Motors) print in place Jeep.&nbsp;Prints without supports. Samples are printed in PLA with 0.2 layer height, at least 3 perimeters, and 10%-15% gyroid infill. Examples printed in PolyMaker Silk Chrome PLA, Eryone Dual Color Blue/Green Silk PLA and an unknown gold silk PLA.

Fixum Dude Motors PIP Jeep 

Autos, Schiffe, Flugzeuge

Whopper Printing

This fun model is print-in-place and prints entirely without support and folds together right off the build plate. No assembly!&nbsp;This model is designed to fit small LED tealights inside (but you can change the source of light to anything you want)! Optionally, I've designed an insert that when lit from the back, takes the design to another level!&nbsp;The wheels are locked to the body of the model during printing in order to ensure nothing comes off the print bed during printing, but can be broken free and rotated after printing.&nbsp;If you would like to support me, consider these options:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>

Haunted Hearse - Print-in-Place Foldable Model

Besonderes

Berliner

Product Description: Skull Candle Holder for HalloweenAre you in search of a unique decoration for your Halloween celebration? Our Skull Candle Holder is the perfect choice! This captivating piece of art has been meticulously modeled from a real skull scan, providing a spooky yet highly appealing atmosphere for your Halloween experience.Key Features:Realistic Design: The Skull Candle Holder has been carefully crafted to capture the finest details of a real skull, giving it an authentic and eerie appearance.Fits LED Candles: The candle holder accommodates LED candles with a diameter of up to 7 cm. These LED candles can be safely placed inside the skull without the risk of open flames.Glowing Eyes: The skull's eyes glow in the dark, creating an additional creepy effect that complements the ambiance perfectly.Single-Color 3D Printing: This impressive model can be 3D printed in just 8 hours to meet your Halloween or other event needs. Please note that the printing time may vary depending on individual settings. In our case, it took 19 hours to create this masterpiece.Versatile Use: The Skull Candle Holder not only serves as a candle holder but can also function as a unique storage container for candies or other small items. It's a versatile decorative piece that can be used year-round.Perfect for Halloween: The Skull Candle Holder is the ideal addition to your Halloween decor. Place it on your table, porch, or fireplace mantel to create a spooky atmosphere that will impress your guests. This work of art will undoubtedly be a conversation starter at your Halloween party.Get our Skull Candle Holder today and add a one-of-a-kind, eerie touch to your Halloween festivities!