EdaBee

10-inch rack mount for AVM Fritz!Box 7583 – 2U

0.28mm layer, 2 walls, 15% infill

10 inch rack for AVM Fritz!box 7583 - 2U

5 cards ABS or PETG

8 cards PLA wood 

7 cards ABS or PETG

stronger - different plate setup

6 cards ABS or PETG

Credit Card holder

REMIX inc.cover 0.4 nozzle, 0.2mm layer, 6 walls, 25% infill

0.8mm nozzle, 0.4mm layer, 6 walls, 50% infill

Tom_X1Carbon&A1Mini

0.4mm nozzle, 0.2mm layer, 6 walls, fits to X1C and P1S

Eibos dessicant dryer plate

0.2mm layer, 2 walls, 15% infill

[BaBo] wiper cutter 1x2

0.08mm layer, 4 walls, 15% infill

0.20mm layer, 3 walls, 50% infill

Plant irrigation & microdrip set

iMAC 27 keyboard & mouse holder - rear

Foldable solar panel frames (88x142mm)

0.12mm layer, 2 walls, 15% infill

Keyboard foot (Skiller Pro)

0.2mm layer, 6 walls, 25% infill

HDD to SSD bracket for iMac

Inserts for Ikea Kallax

0.28mm layer, 3 walls, 15% infill

user_528627135

120% size, 0.2mm layer, 6 walls, 75% infill

Kids bike basket

Champagne keeper bottle cap

VanMoof No. 3  bicycle light replacement

0.12mm layer, 7 walls, 15% infill

MacBook  Pro charger cable protector

0.08mm layer, 2 walls, 15% infill

0.2mm layer, 5 walls, 25% infill

Dryer connector 7,5mm to 20mm

Ikea Skadis - needle storage

0.16mm layer, 2 walls, 15% infill & 0.08mm

UslsMastr3D

PLA, 0.16mm layer, A1 Mini

Elsa tiara - Frozen

0.16mm layer, 4 walls, 20% infill

BaBo foldable spool holder, guide and Y-splitter

0.2mm layer, 3 walls, 10% infill

Modular Riser 1cm, LED, hygrometer, temp sensors

Scraper holder for replaceable blades

Portal

铲刀刀片

Spatula Blade

0.1mm layer, 3 walls, 15% infill

Worked well for me! test print in transparent ABS.

c4444

Gridfinity Basic Bin 1x1 4U

0.2mm layer, 3 walls, 15% infill

holes for the magnets are 4mm or so, which is suboptimal for use with 2mm magnets

Willi 3D

[BaBo] modul feets

feets

Printed excellent using 95A TPU. I printed 6 of these to also support the middle of the Babo system

LAYERED

BaBo Organizer Drawer Handle

0.2mm layer, 4 walls, 15% infill

I really like the descriptions on drawer handles! And it uses the full capabilities of the printer.

the Raz

M3-M8 nuts and bolts printable with 0.4 nozzle

0.08mm layer, 2 walls, 15% gyroid infill, Arachne at 15/10%

Excellent, and they match well. M6 head broke off, so I recommend using a different wall thickness, other infill or 100% infill.

[BaBo duo] AMS adapter module

[Bambu duo] AMS adapter module

[Updated 18.07.24] BaBo duo AMS adapter

RestoreDoctor

50mm Tape Dispenser Cutter

0.2mm layer, 2 walls, 100% infill

apex3D

BambuLab Poop Chute - Low version

0.24mm layer, 2 walls, 0% infill

dakin80

Gridfinity soldering tip bin

0.2mm layer, 1 walls, 0% infill

[BaBo duo] drawer module 30 organizer

[Updated 06.02.24] BaBo duo drawer modul

ToolsByDenis

microSD and SD Card Organizer