Eric

Meister Edel

Update 10.02.2023:I remixed the rotor with the toroidal design :) Feel free to test ist out!<a target="_blank" href="https://makerworld.com/de/models/54749#profileId-56494" rel="nofollow noopener">https://makerworld.com/de/models/54749#profileId-56494</a>In addition, there are now many other great remixed propellers from other users. You can find them connected to this print or my toroidal propeller.<figure class="image image_resized image-style-align-center" style="width:65.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_2d7kbimuo75c.jpg"></figure>&nbsp;HiRecently my son came home very sad because a friend had such a fancy flying propeller from the 1€ shop.Of course I had to sit down directly at the computer and after the first prototype was already well working I designed an improved version.This toy should be very stable and last a long time! Also, it's very easy to use and grab for the smaller ones among us!Put the pulling rod in the place marked by the arrows. Otherwise the propeller wants to fly downwards. Have fun! :) Note: The prop will fly long distances/ very high. So better use it in a place without trees and no obstacles. Hold the Toy away from the face! - otherwise the propeller will fly into it :D&nbsp;Print instructions/ tipps:<ul><li>Axis: Print the axis with at least 3-4 perimeters!</li><li>Propeller: Print the propeller with a not too brittle material! (I used tough PLA or even better: Nylon + Carbon Filament) - Low infill: The lighter the better ,-) I also tried TPU. It works but if you pull too hard it may deform too much and cause a malfunction. The lower you choose the layer hight the less friction the prop will cause. (I printed in 0,15mm)</li><li>Gear & Bearings: Use filament that can withstand kinda low tolerances. PLA will do the job. If you have a seam cut it off after printing. To avoid a bad surface dont "fill the gaps".</li><li>Pulling rod: Print the Classic+ Rod with 3 Perimeter.</li><li>It is possible to separate the file into parts with your slicer ,)</li><li>I also like to break the corners of all parts by scraping over these areas with a knife. That makes the action smooth and gives a good handfeel :)</li><li>Power of Scaling: If you have difficulties inserting the axis you may reprint it scaled down a little. If it is too loose scale it up a little so it fits tight enough.</li><li>It is not necessary but I lubricated all mechanical pieces with some paraffin wax. A drop of Oil will do the job too but may be messy.</li><li>You can print all parts without support and put the parts together very easy.</li></ul>Attention: Don't use damaged Propeller!! A disbalance in the Rotation might destroy the Propeller and parts could fly Off. Especially with brital Material Like PLA.  New Mechanics Update: This is the right way to assemble the toy!<figure class="media"><div data-oembed-url="https://youtu.be/0pYzTrsRqqw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/0pYzTrsRqqw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Since the design optimazion of the internal mechanics there is no glue needed at all!  &nbsp;I have also provided other beautiful designs for kids for free. For example, my latest is the ocarina to make music!<a target="_blank" href="https://makerworld.com/de/models/54693#profileId-58010" rel="nofollow noopener">https://makerworld.com/de/models/54693#profileId-58010</a>&nbsp;<figure class="image image_resized image-style-align-center" style="width:74.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_2xl9blerr9l5.jpg"></figure>&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=WfEfctJU70o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/WfEfctJU70o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;To get the most strength out of the pulling rods locate the seam to this location: (It is possible with the Prusa Slicer for example)<figure class="image image_resized" style="width:61.62%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_yj4redoaa581.png"></figure>&nbsp;Remix CultureI think this simple design is very open for you to bring in your designs too! So be invited to create even better propellers! (I uploaded the .step file of the core piece. [mm])&nbsp;<figure class="image image_resized image-style-align-center" style="width:66.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_sxifu6dn5if0.jpg"></figure>&nbsp;&nbsp;&nbsp;Update 06.07.2022Added a new (hopefully) more aerodynamik prop. This one flies even higher!(Added in standard download & single)Update 28.05.2023Increased the strength of the prop a little by adding a radius connecting the wings with the outer ring.Update 23.02.2023: NEW PULLING RODS! Some had proplems with a breaking pulling Rod. So I beefed up the old one (Classic+) and also designed 2 totaly new ones (Ergonomic & Hook). For the Ergonomic one you will need a M3 x 20+ Screw for assembling. I tested all with PLA in the local kindergarten and they withstand even rough abuse :PUpdate 27.09.2023: Due to different manufacturing tolerances the press fit does not always work directly (scaling the axle can work wonders) I have slightly reworked the inner mechanics. I'm happy about any short feedback on the new design!&nbsp;&nbsp;If you like my work I would be very happy if you share it with others and leave a like :)

Strong Flying Propeller / Pull Copter (No Supports)

Collecticraft

<h2>Celestial Resonance: Meditation - Sculpture in Mid-Air</h2>Step into the ethereal realm of inner peace and cosmic harmony with "Celestial Resonance," a visionary sculpture project that transcends earthly constraints. Inspired by the serene practices of oriental religions, this project presents an abstract human form suspended in mid-air, inviting viewers to embark on a transformative journey of meditation and introspection.<h3>Key Features:</h3>Meditation Pose: The sculpture embodies the tranquility of meditation, with the figure depicted in a serene and contemplative pose. With eyes closed and hands delicately positioned, it exudes a sense of inner peace and spiritual elevation.&nbsp;Ethereal Beauty: Crafted with meticulous attention to detail, "Celestial Resonance" radiates ethereal beauty and grace. The fluid lines of the body and the subtle curvature of the hands convey a sense of transcendence and cosmic connection.&nbsp;Harmony with the Cosmos: Suspended in mid-air, the sculpture appears to float effortlessly, attuned to the celestial rhythms that resonate throughout the universe. It serves as a visual representation of the interconnectedness of all beings and the boundless expanse of the cosmos.&nbsp;Transformative Experience: More than just a sculpture, "Celestial Resonance" offers a transformative experience for viewers. It serves as a portal to a higher plane of existence, where the boundaries between the self and the universe dissolve into pure, resonant energy.&nbsp;Spiritual Exploration: By engaging with the sculpture, viewers are invited to pause, reflect, and explore the depths of their own consciousness. "Celestial Resonance" provides a space for spiritual exploration and self-discovery, fostering a deeper connection to the cosmos and the inner self.&nbsp;Commercial Licensing: <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patrons</a> also have the opportunity to use commercial licenses for their own creative projects, adding versatility and potential income streams.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517219/2024-02-07_88369b9dc8c24.png"></figure>

Celestial Resonance: Meditation - Sculpture in Mid-Air

摆件

UNDx Designs

<blockquote>THE STL FILES GIVEN ARE FOR 10mm AND 8mm WRENCH DESIGN FOR ILLUSTRATIVE PURPOSES. USE THE PARAMETRIC DESIGNER TO CUSTOMIZE YOUR WRENCH OR SPANNER AS NEEDED.  </blockquote> This parametric wrench model is designed in OpenSCAD and allows users to customize the wrench according to specific needs. The model supports five different types of wrenches:<ol><li>Single open-end wrench</li><li>Single ring-end wrench</li><li>Double open-end wrench</li><li>Double ring-end wrench</li><li>Combination wrench (one end open, one end ring)</li></ol>&nbsp;Users can specify key parameters such as the size of the wrench ends, the overall length, the thickness of the wrench, and for single-ended wrenches, the size of a hanging hole.&nbsp;&nbsp;<h3>User Instructions</h3><h4>Parameters</h4>1. Combination (combination):<ul><li>Values: 1 to 5</li><li>Description: Select the type of wrench:<ul><li>1: Single open-end wrench</li><li>2: Single ring-end wrench</li><li>3: Double open-end wrench</li><li>4: Double ring-end wrench</li><li>5: Combination wrench (one end open, one end ring)</li></ul></li></ul><figure class="image image_resized" style="width: 46.48%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482998/design/2024-06-03_0bbfb4b658ee.jpg"></figure>2. Width of Opening for 1st End (size1):<ul><li>Value: Positive number in millimeters</li><li>Description: Set the size of the opening for the first end of the wrench.</li></ul><figure class="image image_resized" style="width: 49.21%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482998/design/2024-06-03_dc5a566ddf8ec.jpg"></figure>3. Width of Opening for 2nd End (size2):<ul><li>Value: Positive number in millimeters</li><li>Description: Set the size of the opening for the second end of the wrench. This parameter is only applicable for combinations 3, 4, and 5.</li></ul>4.Thickness of Wrench (thickness):<ul><li>Value: Positive number in millimeters</li><li>Description: Set the thickness of the wrench.</li></ul>5.Length of Wrench (length):<ul><li>Value: Positive number in millimeters</li><li>Description: Set the length of the wrench. It is recommended to use a length at least twice the width of the largest opening.</li></ul><figure class="image image_resized" style="width: 46.19%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482998/design/2024-06-03_3ab225d495f7b.jpg"></figure>6.Segments in a Full Circle (segments):<ul><li>Value: Positive number</li><li>Description: Set the number of segments in a full circle for higher quality circular edges.</li></ul>7.Hanging Hole Diameter (hole):<ul><li>Value: Positive number in millimeters or 0</li><li>Description: Set the diameter of the hanging hole. Use 0 for no hole. Applicable only for single-ended wrenches (combinations 1 and 2).</li></ul><h4>Usage</h4><ol><li>Set the Combination Type: Choose the type of wrench by setting the combination parameter to a value between 1 and 5.</li><li>Specify Wrench Sizes: Define the sizes of the wrench openings using size1 and size2 parameters. For single-ended wrenches (combinations 1 and 2), only size1 is necessary.</li><li>Define Physical Dimensions: Set the thickness and length parameters according to your requirements.</li><li>Adjust Segment Quality: If you need smoother circular edges, increase the segments parameter value.</li><li>Hanging Hole Option: For single-ended wrenches (combinations 1 and 2), you can specify a hanging hole diameter using the hole parameter. Set it to a value lower than size1, or use 0 for no hole.</li><li>Generate the Model: After setting the parameters, render the model in OpenSCAD. Ensure that all parameters are set to valid, non-zero values to avoid errors.</li></ol>

Customizable Wrench/Spanner

工具

Hugo

<h3>The reason behind this project</h3>I absolutely love 3D-printed storage systems, but there&#39;s one thing I don&#39;t like about them: how the bins connect to each other. With most systems out there, you need to print a base grid or tiny connecting pieces, which is a bit of a hassle. And the attempts at interconnecting storage systems are not aestheticly pleasing. That&#39;s why I came up with this new design! I wanted interlocking bins of various sizes that can connect on each side but with a sleek and simple design.I&#39;ve also added small bumps on the inside, which means you can add accessories and customise each bin to a dedicated task.And to create custom storage boxes, I&#39;ve adapted my <a href="https://www.printables.com/model/761101-snaplock-storage-boxes" rel="nofollow">SnapLock </a>model to accommodate the bins.&nbsp;<h3>How to choose the size</h3>The standard bin, Bin_1x1x1, is 60x60x50mm outer dimensions.All the dimensions in the STL names are based on those dimensions*Every bin is named as follow : Bin_length x width x heightThe other flat components such as lids are named : Lid_length x width&nbsp;*The other bins are not exact multiples of the standard bin as I take into account the interconnecting part&nbsp;<h3>Test print</h3>I encourage you to test the fit by printing 2 Bin_1x1x0.5It should be a nice, snug fit, but not so tight that it&#39;s impossible to split.&nbsp;<h3>Printing</h3>All the STLs are oriented to be printed directly No support neededYou can use any materialThe sweet spot between material use and rigidity for me is 2 walls ans 5% infill with a 0.4mm nozzle (bigger nozzle should work as well)&nbsp;<h3>Accessories </h3>You can even put the bins on their side to act as drawers.For the moment I have designed several accessories that fit inside or outside the bins :<ul><li>Drawers (I used the plastic&#39;s elasticity to lock them in place while closed)<ul><li>Assembled drawer</li><li>Screw drawer</li></ul></li><li>Lid (to close any bin</li><li>Screw organizer</li><li>Tray</li><li>Battery holder</li><li>Pen holder</li><li>SnapLock storage box</li></ul>&nbsp;Feel free to give me some feedback if you give this project a try :)

BinLink

收纳

HpInvent

After many requests I designed this round version of the popular Inflated soft Cloth Planter Plant Pot Vase Series6 .&nbsp;Due to many requests for commercial licenses for my 3D models I created a patreon page. You can become a member to get permission for commercial use or just want to support my work : <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener">https://www.patreon.com/user?u=79128277</a>  There you can also find exclusive Models for Patreon Subscribers only ;)&nbsp;If you Just want to give a one time Support you can buy me a coffe here ;)  <a target="_blank" href="https://buymeacoffee.com/hpinvent" rel="nofollow noopener">https://buymeacoffee.com/hpinvent</a>&nbsp;Here is a small Sneak Peak of a coming Bathroom Set  More Information about the launch date and early acces can be found on my Patreon. <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-06-14_835436fae26ee.png"></a>&nbsp;Also check out my other Designs!I have a bunch more stuff in my profile!! <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a><a target="_blank" href="https://makerworld.com/en/models/428498" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-04-18_7588ba5642a27.png"></a><a target="_blank" href="https://makerworld.com/en/models/452212" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-05-18_5ba103201c91e.png"></a><a target="_blank" href="https://makerworld.com/en/models/426994" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-04-15_b0f8912a15393.png"></a><a target="_blank" href="https://makerworld.com/en/models/427979" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-04-15_b1e75bac7bd51.png"></a><a target="_blank" href="https://makerworld.com/en/models/416941" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-04-08_ebe2de8bae1b3.png"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-03-06_ea517b7dbe741.png"></a><a target="_blank" href="https://makerworld.com/en/models/394559" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-03-27_3b061a50c97b7.png"></a> <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468094/design/2024-03-08_a8a626fc04c78.png"></a>  &nbsp;&nbsp;&nbsp;Happy printing!

Inflated Plant Pot Nr.6 Round Version

Sarmy🍓

ngprint

Metric M12 Screws/Bolts/Nuts/Washers&nbsp;These models are optimized for FDM 3D printing and should fit without the need for rescaling.No supports needed if you print them standing.They are still compatible with standard metal bolts/nuts.For better strength, try printing them with a few more wall lines.Smaller layer heights result in better threads.&nbsp;DIN 933 Hexagon head screwsDIN 934 NutDIN 1587 Cap NutDIN 315 Wing NutDIN 125 WasherDIN 9021 Washer&nbsp;Other sizes:<a target="_blank" href="https://makerworld.com/en/models/378318" rel="nofollow noopener">M6</a><a target="_blank" href="https://makerworld.com/en/models/378392" rel="nofollow noopener">M8</a><a target="_blank" href="https://makerworld.com/en/models/378447" rel="nofollow noopener">M10</a>&nbsp;Recommended Print settings:-PLA/PETG/ABS/PA/PC depending on the use case-0,16mm layer height or smaller-minimum 4 wall lines-4 top an bottom layers-30% Infill

Ultimate Bolts, Screws, Nuts, and Washer Set M12

五金配件

ThreeD-Michael

<figure class="table" style="width:50%;"><table><tbody><tr><td>News 2024-04-10:Please also check out my new <a target="_blank" href="https://makerworld.com/en/models/422861" rel="nofollow noopener">Blade Dispenser</a> for this Bed Scraper:<figure class="image"><a href="https://makerworld.com/en/models/422861" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/843986/2024-04-10_3fff13c94089c.png"></a></figure></td></tr></tbody></table></figure>This is the XL version of my popular <a target="_blank" href="https://makerworld.com/en/models/231936" rel="nofollow noopener">Optimized Bed Scraper</a> with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer!&nbsp;Each blade weighs just 1.8 grams - and since each blade has two cutting edges, only 0.9 grams of filament is required per cutting edge. It couldn&#39;t be more economical, and you can now replace the blades more often without feeling guilty.&nbsp;Print Settings:This design has been optimized for printing with a layer height of 0.2 mm, so please do not use a different value. The first layer should have a line width of at least 0.5 mm. In order to get the sharpest possible blade, you should choose a smooth printing surface if possible.The locking mechanism has been optimized for PLA, so I recommend this filament for the handle. You can also print the blades with PLA - as long as you don&#39;t scratch on a bed that&#39;s too hot for PLA. In this case, I would recommend a more heat-resistant filament, for example PETG.&nbsp;Assembly:That is very easy. Simply slide the blade into the handle. But be careful - the blades are sharp, so don&#39;t push them in with your finger, but insert them loosely and then push them all the way by pressing the blade on a solid surface.

Optimized Bed Scraper XL

打印机配件

Eleazar 3DinPlastic

Maker World does not allow you to upload a 3mf with custom Gcode, in the fifth image you can see the command that you must use for temperature changes, it is added in the right bar as custom G-code: “M104 S[Target temperature]”&nbsp;Customised layered G-Code: - layer 44: M104 S225 - layer 84: M104 S220 - layer 124: M104 S215 - layer 164: M104 S210 - layer 204: M104 S205 - layer 244: M104 S200 - layer 284: M104 S195 - layer 324: M104 S190&nbsp;In this image you can see how to enter the custom Gcodes to set the printing temperature manually, you must also choose the maximum temperature as the printing temperature in the profile of your filament.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/862671/2024-03-11_88f8890a06961.webp"></figure>&nbsp;&nbsp;Towe Temp for PLA 230-190ºCTower Temp for ABS 270-230ºCTower Temp for PETG 250-220ºC&nbsp;<a target="_blank" href="https://makerworld.com/en/models/56371#profileId-57990" rel="nofollow noopener">If your tower has a lot of threads between the cones, you can try printing this design and calibrate your retractions, I hope it helps!</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/862671/2024-03-11_f215cb148d647.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/240794#profileId-256732" rel="nofollow noopener">NEW MODEL AVAILABLE</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/862671/2024-03-11_c42e9c53b8b2a.png"></figure>&nbsp;&nbsp;&nbsp;

玩

摆件

工具

收纳

Sarmy🍓

五金配件

打印机配件

测试模型