Eric_tank

maximdivirgilio

North American XB-70 Valkyrie 1:80 Scale Model&nbsp;38 Pieces2 Optional Display StandsAssembled with CA Glue0.2mm nozzle is suggested for most parts&nbsp;&nbsp;VERSION TWO UPDATE&nbsp;From the beginning I was aware this was a difficult model. While buildable, it was far from optimized. Since seeing the reception of the model, I have committed the time towards optimizing it a bit further, making it easier to print by itself as well as in multiple colors. Please refer to the Version 2 folder for these updated models. &nbsp;As well, I highly suggest opting for the 3MF print profiles over the raw STLs. &nbsp;PLEASE NOTE STAND 2 WILL ONLY WORK IF PRINTED IN A STIFFER MATERIAL THAN PLA&nbsp;&nbsp; Please feel free to comment of PM with any questions or concerns. Enjoy!

XB-70 Valkyrie

Aircraft

martin.taichl

This is 3D printable model of the Constitution Class NCC-1701 Enterprise from the Star Trek. It is a kit and does not require any glue. The different colored parts are separated for easier printing. The ship is a hybrid of TOS and SNW versions. Pieces of the necelles need to be separated into separate model in the slicer ;) For the assembly, please have a look at the following video. <figure class="media"><div data-oembed-url="https://youtu.be/HmZTOx1XaaA?si=SRYyh12Jd1WL4Nwe"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/HmZTOx1XaaA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Enterprise Constitution Class

Star Trek

DavidsGotWood

<figure class="table" style="width:100%;"><table style="background-color:#F1FAE7;border-style:solid;"><tbody><tr><td style="border-color:#16C344;border-style:solid;">This model still works great, but I there is an <a target="_blank" href="https://makerworld.com/en/models/150357#profileId-164033" rel="nofollow noopener">improved model</a> that's quicker to print and is more compatible with the AMS Lite.</td></tr></tbody></table></figure><h3>About</h3>A ground-up rebuild of the excellent Polymaker spool adapter with the following changes:<ul><li>Edge clips removed (These tend to damage spools and are also not needed since the adapter uses the locator pin to lock into place)</li><li>The Center design has been updated for a more generic spool look (More visually compatible with both Polymaker and Overture brands)</li><li>The fitting has been slightly adjusted to allow easier swapping between spools without compromising its hold on the spool (less likely to break when being removed)</li></ul><h3>Printing</h3>Prints well in PLA and PETG. PETG is less brittle and has better layer adhesion, which is beneficial with the very thin edges (to help avoid layer splitting).<h3>Remixing</h3>This model can be remixed using the provided Onshape link or via your own tools using the provided Step file. <a target="_blank" href="https://cad.onshape.com/documents/dbaebacda5b3cb0106ef3785/v/3bd545f2309a6f1639bc2dfa/e/b3a36ea65d7d2dbba3dd98f7?renderMode=0&uiState=65ac3d935b651058e8f0c7cd" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/444098/2024-01-20_862d67e6026cc.png"></a><figure class="table" style="float:left;"><table style="background-color:rgba(64, 200, 232, 0.094);border:1px solid rgb(64, 200, 232);"><tbody><tr><td style="border:1px solid rgb(64, 200, 232);padding:0.4em;">Note for Open Sourcing 3D Printed models:If providing 3D models under an Open licence, please be genuinely #OpenSource, release your source files with your STLs and make it easier for others to collaborate.</td></tr></tbody></table></figure>

Polymaker / PolyTerra / Overture Cardboard Spool Adapter

Filament Reels

Justin Yu

This is a remix of the original HSW located here: <a target="_blank" href="https://makerworld.com/en/models/16011#profileId-15092" rel="nofollow noopener">https://makerworld.com/en/models/16011#profileId-15092</a>&nbsp;This includes all the parts needed to make a fully functional honeycomb storage wall&nbsp;I also included paint holders that should fit anywhere between 20mm bottles up to 35 mm bottles&nbsp;A fun yet functional print

Honeycomb Storage Wall The Complete Edition

sfr1at

A small stackable desk shelf to organize a network switch or various other small devices on a desk.&nbsp;Overall Sizes: Width: 245mm Depth: 150mm Height: 175mm&nbsp;Compartments inside dimensions: Width: 230mm Depth: 150mm Height: 60mm&nbsp;Foot height: 30mm&nbsp;Update: 30.12.2023There is now a second version with the middle level missing so that higher devices can be stored.

Stackable desk shelf

Desk items

Marc Elbichon

Thanks to original design, reworked for multicolor print&nbsp;Imperial version available here : <a target="_blank" href="https://makerworld.com/en/models/55039" rel="nofollow noopener">https://makerworld.com/en/models/55039</a>&nbsp;Enjoy!

Metric Screw Gauge

Tools

SPEKERDUDE

<div><h1>Summary</h1><div>Replacement foot for the Logitech MK320 wireless Keyboardprint flat side down with 100% infill (supports required) </div></div>

Logitech MK320 Keyboard Foot

Computer items

bomas_ulz

Simply print 2x Bottom and 2x Top and insert rods. Diameter of the holes is 28.1mm. You need rods with a diameter of 28mm. I used old curtain rods made of wood with 27,76 mm diameter and I bought some wood rods in the hardware store with 28 mm diameter.&nbsp;Preparation:<ul><li>4 rods of 30 cm for the height</li><li>4 rods of desired length</li></ul>I first used 95 cm length, but siwtched to 120 cm length. &nbsp;Everything is plugged in, no glue required.&nbsp;Easily holds over 30 spools of filament. &nbsp;Printed with 3 walls/top/bottom and 15% gyroid infill in Prusament ASA. Maybe print just one part first and check if it fits your rods. Should work with other filaments, too.

Filament Spool Rack

Filament Storage

Janne.

The picture shows a typo, CR2033 corrected CR2032.Changed V13GA to LR44. V13GA battery is a same as LR44. LR44 is the more widely used name.

Battery Organizer

battery holders

ghostgirl

When I was little, I had a ceramic Christmas tree that was lit from the inside that we'd set out every year. I wanted to make my own modern version of that little vintage tree. It fits an LED tea light perfectly and is a great size to set in a window or just use as a decoration wherever you'd like. (Please do not use a traditional tea light, fire and 3D prints are not friends!) I wanted one you could use for any type of filament, not just transparent, although if you're putting it in a window, the translucent filament gives off a brighter glow.I've uploaded three print profiles - one with a single color, and two for dual colors, one with a print tower, and one without. Happy Holidays, and Merry Printing!

Vintage style Christmas Tree Luminary (Transparent PLA NOT required!) for LED Tea Lights

Christmas

Maker Tom

My Version of a stable Side Spool Holder.The Holder an the Filament Guide can be printed support free.Printing the Role upright.The PC4-M10 thread should fit wellBest printed: Infill 100%Apart from printed parts you will also need:<ul><li>4x M3x20 screws</li><li>2x 608 ZZ ball bearings (8mm x 22mm x 7mm)</li><li>1 x PC4-M10 </li></ul> Have fun printing