Pakman

Zurlingo-3D

Christmas Puzzle Gift Box *Extreme Edition*&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/sp7ZSfbfw7A?si=MVZSIp2eIlWSBcrE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/sp7ZSfbfw7A" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Features:<ul><li>A locked lid</li><li>A hidden key and bolt locking system with an additional 20 hidden screws to securely hold the lid in place</li><li>3 Different screw types</li><li>3 Different screw drivers</li><li>Secret compartments to hide the screw drivers</li><li>Super strong lock (Box will not open without removing the bolt and all screws)</li><li>Print in multiple colours without AMS</li><li>Fun for kids</li><li>Secret storage</li><li>Reusable</li><li>Tolerance test included. This is to ensure all parts will fit before committing to a long print.</li></ul>This Christmas puzzle box is a great addition to anyone's Christmas day!&nbsp;Fill it with sweets or gifts and give your kids the challenge of figuring out how to open the lid!&nbsp;You need to print the following parts for a full puzzle box:<ol><li>Box</li><li>Lid</li><li>Side ribbon strip x 4</li><li>Hidden ribbon strips x 3</li><li>Top ribbon strips</li><li>Key</li><li>Bolt</li><li>Bolt Cap</li><li>Key Cap</li><li>20 Screws</li><li>3 Screw Drivers</li></ol>All parts are easy to print and fit together easily with generous tolerances.&nbsp;Assembly:&nbsp;<ul><li>Tilt the box on its side</li><li>Put the lid on</li><li>Insert all 20 screws on all 4 sides of the box</li><li>Gently slide a side ribbon strip into the track.</li><li>Keep sliding until it meets the stop.</li><li>Repeat this on all 4 sides.</li><li>Insert the drivers into the recessed holes at the 3 corners</li><li>Slide the hidden ribbon strips in place to cover the holes/drivers</li><li>Locate the bolt through the hole in the box and into the threads in the lid. (Start by hand)</li><li>Turn the bolt all the way in with the key</li><li>Cover the bolt with the bolt cap</li><li>Put the key into it's secret compartment</li><li>Cover the key with the key cap.</li></ul>&nbsp;Usage:&nbsp;<ol><li>Take off the caps (Key cap is deliberately tricky - Bolt cap can be popped out by squeezing the box)</li><li>Tap the box on your hand or a hard surface to release the key (if it hasn't already fallen out)</li><li>Use the key to unscrew the bolt enough to get a grip with your fingers.</li><li>Remove the bolt entirely and place to one side.</li><li>Remove the hidden ribbon strips</li><li>Remove the 3 screw drivers</li><li>Remove all 20 screws on all 4 sides of the box</li><li>Open the lid!</li></ol>I have included a tolerance test in the model files and pre sliced profile. This is purely if you are trying to scale up or down and want to check tolerances of all parts. It can also be used to check that you printer is dialled in properly before committing to the full box print.&nbsp;Print Settings:&nbsp;Nozzle: 0.4mmInfill: 12% GyroidLayer Height: 0.2mmSupport: NonePerimeters: 5Top/bottom Layers: 5&nbsp;This will make everything pretty solid with minimal infill being used.&nbsp;Tip: If you find that the side ribbon strips and/or the screws are tight, then print them at 0.12 layer height. This should give a little more tolerance between the sliding and interlocking parts.&nbsp;Thanks for looking!&nbsp;Please don't forget to post pictures of your makes :)&nbsp;EDIT:Check out my latest gift box LIVE on my profile now! :P(Tap The Picture)<a target="_blank" href="https://makerworld.com/en/models/102875#profileId-109543" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/295270/2023-12-22_b9dc197ca3d78.png"></a>

Puzzle Gift Box *Extreme Edition*

gift

Sketchy

<h2>Gravity Phone Holder V2</h2>Introducing the Gravity Phone Holder V2, the next evolution in smartphone mounting technology. Building upon the success of its predecessor, the Gravity Phone Holder V2 offers enhanced features and improved functionality to elevate your mobile experience to new heights!&nbsp;With an upgraded design, the Gravity Phone Holder V2 boasts even smoother operation and greater stability. The gravity-activated mechanism has been fine-tuned for seamless one-handed usage, allowing you to effortlessly mount and dismount your device with precision and ease!&nbsp;<h3>What do I need to assemble it?</h3>You need:<ul><li>1 x rubber band</li><li>4 x M3 bolts ( around 8mm )</li><li>2 x M3 nuts</li></ul>&nbsp;<h3>How do I assemble it?</h3>It is relatively easy to assemble the Gravity Phone Holder V2! Just follow the steps below:&nbsp;Step 1: Insert the bolts into the back of the body.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425349/design/2024-04-12_37d177278529a.jpg">Step 2: Following step 1, you screw on the mount onto the back of the body (I&#39;ve updated the mount and the vent clip).In the updated version, there is only the ventclip. The clip just needs to be bolted onto the body with 2 M3 bolts and nuts.&nbsp;Step 3: Insert the rubber band and the gears (the rubber band is optional).<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425349/design/2024-04-12_8b047f7e5a864.jpg">Step 4: Screw on the lid, and you&#39;re done! Now this is optional, but you can lube it up by spraying the middle hole on the lid with some lubricant.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425349/design/2024-04-12_10d66b1b5f40d.jpg">&nbsp;<h3>Tips and tricks</h3>No support needed for any of it!Maybe put a brim around the gears if you have bad bed adhesion.If using a rubber band, find a size that isn&#39;t too large (loose) or too small (tight).

Gravity Phone Holder V3!!!

jaspauls

Introducing our Pegboard storage Box:<ul><li>External dimensions: 70 × 45 mm.</li><li>Tailored for seamless attachment to pegboards.</li><li>Equipped with hooks on the back for easy pegboard mounting.</li><li>Compatible with pegboards featuring 4.5 mm holes spaced at 15 mm intervals.</li></ul>

Pegboard storage Box

garage

make 3D

This riser adds 18.5mm to the top glass height. This does help some with the “filament pull out error” as the PTFE tubes is not bend by the glass.&nbsp;This riser design allows for a LED strip to be installed with 3D printed diffusers for a softer light.&nbsp;Benefits of this design:<ul><li>Soft inner corners allows the LE strip to follow along without any sharp bends. And no soldering is needed.</li><li>The riser is designed so you can install 4 diffusers so the LED strip does not shine too hard.</li><li>The design of the riser does not need any support for printing. (no additional clean-up is needed)</li><li>All parts snap perfectly together and does not require screws or glue.</li><li>All 4 main parts are labeled with numbers to ensure an easy assembly.</li><li>No Support material is needed - the riser only needs assembly.</li></ul>&nbsp;My riser are printed in:SUNLU PLA+ BlackGEEETECH Matte PLA White&nbsp;For P1S users: you can just use a regular USB LED strip with the USB port next the the screen. (inside the printer)&nbsp;When installing the diffusers, make sure you assemble them in the correct orientation.The two long cutouts on the diffusers should be on the front of the riser:<figure class="image image_resized" style="width: 42.03%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000099746/design/2023-12-19_6fa5cbffef518.png"></figure>LicensingAll my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.For some designs it is possible to buy a individual license for a fixed fee. Please contact me for any details regarding this.&nbsp;How to Support MeIf you like my designs, please give them a ‘like’ as this helps the model being more visible to other users.Also please consider donating via <a target="_blank" href="https://www.buymeacoffee.com/make3d" rel="nofollow noopener">https://www.buymeacoffee.com/make3d</a>  All support is highly appreciated!&nbsp;UPDATE 21-12-2023:I have changed the design of the front panels for it to fit the P1P model - I was informed the P1P was a tiny bit smaller and the original riser would not fit.I have not tested this myself, but got the dimensions from another user.&nbsp;UPDATE 24-12-2023:I have added a hole on the back left side for wiring to external power supply. This is mostly for all X1C users.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000099746/design/2023-12-24_66023a61afd7d8.png"></figure>UPDATE 26-12-2023 (Version 4):I have changed the hole shape so you are able to wire a USB plug or power supply without having to solder any wires.<figure class="image image_resized" style="width: 61.51%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000099746/design/2023-12-26_a3eb603bd25768.png"></figure>

Low Profile P1S/X1C/P1P Riser with Diffused LED

printer

Llλmbda

Another Mario themed piggy bank this time in the shape of the beloved Bullet Bill! &nbsp;SUPPORTS AND NOTES! Bullet Body:The inside of the bullet shouldnt really need supports depending on how perfect you need it, see mine and user printed photo. If you want it to be perfect use the 2nd print profile named body supports. This part is BIG, make sure to have only around 5% infill to save on material&nbsp;Bullet Back: This part should be printed flat without any supports, again keep infill low. The original had a threaded back but it was too annoying to unscrew everytime so this one is just a push fit Arm Connectors: print upright for best quality while supporting the bottom and coming up the sides Arms: I found the best way is to print in the orientation provided with around 15% infill and using tree supports on the arms

Mario Bullet Bill Piggy Bank

kool

3DPrintable.art

This piece captures the iconic F-16 as it appears to burst through the wall.&nbsp;The model is not an exact replica, but it makes an easy print without supports.&nbsp;Individual files for the plane and the wall are also included.&nbsp;COMMERCIAL LICENSE AVAILABLE: <a target="_blank" href="https://patreon.com/3DPA" rel="nofollow noopener">https://patreon.com/3DPA</a>&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/943536974" rel="nofollow noopener">our other models</a>. Your likes and downloads support more content.&nbsp;Happy printing!&nbsp;

Wall-Breaking F-16 Plane

basement

cartyski

Struggling to open jars of all shapes and sizes? Say goodbye to stubborn lids with this jar opener designed to fit them all!

gift

car

garage

printer

kool

basement

Kitchen

Desk