Enno

Marc Elbichon

<p><strong>➡️ Checkout the entire </strong><a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/477489" rel="nofollow noopener"><strong>Ikea Skadis Collection</strong></a><strong> !</strong></p><p>&nbsp;</p><p>Hi there! Here is some hooks for Ikea Skadis Panels!</p><p>&nbsp;</p><p>Enjoy!</p>

Ikea Skadis Hooks

skadis

fractalnoise

<h2>16x16 LED Matrix Frame</h2><ul><li>No glue, tape or screws needed</li><li>Accessible USB port</li><li>Wall- or desk-mounted</li><li>Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation</li><li>Optional socket-less version</li></ul><p>&nbsp;</p><h3>Instructions</h3><h4>Print:</h4><p>Print the Diffuser Screen with these settings to give the screen a horizontal “scanline” texture:</p><ul><li>Top/Bottom surface pattern: ALIGNED RECTILINEAR</li><li>Internal solid infill pattern: ALIGNED RECTILINEAR</li><li>Sparse infill pattern: ALIGNED RECTILINEAR</li><li>Infill direction: 0</li></ul><p>If using white filament for the Diffuser Screen, printing it on a textured plate will make it scatter more light and be dimmer. Use a smooth plate for best results. A textured plate will work great for clear filament though :)</p><p>&nbsp;</p><h4>For the LED matrix, you'll need:</h4><ul><li>16x16 LED Matrix - e.g. <a target="_blank" href="https://aliexpress.com/item/4000544411175.html" rel="nofollow noopener">https://aliexpress.com/item/4000544411175.html</a></li><li>ESP-Wroom-32 - e.g. <a target="_blank" href="https://aliexpress.com/item/1005005972312714.html" rel="nofollow noopener">https://aliexpress.com/item/1005005972312714.html</a></li><li>MAX4466 microphone - e.g. <a target="_blank" href="https://aliexpress.com/item/3256803608057399.html" rel="nofollow noopener">https://aliexpress.com/item/3256803608057399.html</a><br>or<br>MAX9814 microphone - e.g. <a target="_blank" href="https://aliexpress.com/item/3256805923391884.html" rel="nofollow noopener">https://aliexpress.com/item/3256805923391884.html</a></li><li>Power Supply 5V 1.5A-15A (~2-5A will do for most uses) - e.g. <a target="_blank" href="https://aliexpress.com/item/32844702891.html" rel="nofollow noopener">https://aliexpress.com/item/32844702891.html</a> or <a target="_blank" href="https://aliexpress.com/item/1005006126703620.html" rel="nofollow noopener">https://aliexpress.com/item/1005006126703620.html</a><br>or an old USB cable (cut one end and connect the + and - to the LED matrix)</li></ul><p>&nbsp;</p><h4>LED Matrix/ESP32/WLED Assembly Guide:</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/669002/2024-02-09_116fdd372d0ea8.png"></figure><p>&nbsp;</p><h4>WLED Microphone settings (WLED/Config/Usermods):</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/669002/2024-03-04_04fb85a0840808.png"></figure><p>&nbsp;</p><h4><strong>Some</strong> useful resources:</h4><ul><li>WLED Project: <a target="_blank" href="https://kno.wled.ge/" rel="nofollow noopener">https://kno.wled.ge/</a></li><li>Chris Maher WLED tutorials playlist: <a target="_blank" href="https://www.youtube.com/playlist?list=PLur8dX5PE-4pk838s_gZAdm-98-sf0f0Z" rel="nofollow noopener">https://www.youtube.com/playlist?list=PLur8dX5PE-4pk838s_gZAdm-98-sf0f0Z</a></li><li>Make It Work WLED tutorials playlist: <a target="_blank" href="https://www.youtube.com/playlist?list=PLUTKOGJvdIQ8WYfG6TDJ_c8_WlPovWbL9" rel="nofollow noopener">https://www.youtube.com/playlist?list=PLUTKOGJvdIQ8WYfG6TDJ_c8_WlPovWbL9</a></li></ul><h4> </h4><h4>My other LED projects:</h4><p><a target="_blank" href="https://makerworld.com/en/u/3965042544/collections/101475" rel="nofollow noopener">https://makerworld.com/en/u/3965042544/collections/101475</a></p>

16x16 LED Matrix Frame with Diffuser Grid

nice

chiz_m

<h3>The most <span style="background-color:rgb(255,255,255);color:rgb(5,5,5);">effective, ergonomic and easy-to-use PTFE release tool for the A1 – the EZ A1 PTFE Release Tool!</span></h3><p><strong>*** For best results, please see Tips for Success section ***</strong></p><h3>If you find that this tools works great for you, pls hit that BOOST button!</h3><h3>PROBLEM</h3><p>PTFE tubes on the A1 AMS Lite hub is difficult to remove. Per the Bambu wiki, one has to press down the locking ring with a tweezer in order to remove the PTFE tube. I find it too fiddly and I&#39;m afraid that constantly doing so will eventually cause the gantry to sag and affect alignment.</p><h3>SOLUTION</h3><p>Design an ergonomic tool that will allow easy release of the tube without pressing the entire hub down using only one hand while allowing the other hand free to pull the PTFE tube.</p><h3>FEATURES</h3><ul><li><strong>Stable and efficient </strong>- less prone to errors as tool attaches to the hub preventing accidental sliding</li><li><strong>Easy to use</strong> - Designed with the best user experience in mind! Operate the tool comfortably and naturally by squeezing the thumb and index fingers together</li><li><strong>Less damaging to the printer</strong> - during operation of the tool, stress is limited to the filament hub only and not to the entire gantry</li></ul><h3>PRINTING DIRECTIONS</h3><ul><li>Choose between the <strong>default profile</strong> (better print quality) or the <strong>vertically-oriented profile</strong> (recommended for smoother operation) which makes the layers on the thumb press perpendicular to the layers of the clamp part which allows for smoother sliding action.</li><li>Use <strong>rigid filaments</strong> such as regular PLA, PLA+, ASA, ABS, etc. <strong>DO NOT USE matte or silk PLA</strong> as these filaments are soft and do not provide strong layer adhesion.</li><li>Print as oriented.</li><li>Comes with built-in supports. No need to turn on supports.</li></ul><h3>TIPS FOR SUCCESS</h3><ol><li>If you find the tubes still very hard to pull out, <strong>try pressing the tube down slightly</strong> to allow the metal locking teeth to release before pulling the tube out.</li><li>Make sure that you have the thumb press <strong>aligned in the corner and that it&#39;s pressing only one ring at a time</strong>. Otherwise, if it&#39;s hitting other rings, you might not be pressing the ring down enough.</li></ol><h3>HOW TO USE</h3><p><strong>IMPORTANT: Tool is not meant to be permanently attached to the printhead</strong> as it will prevent filament tangle detection to work. Remove the tool after use.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000392785/design/2024-04-27_283930b7afd63.png"></figure><h3> </h3>

EZ A1 PTFE Release/Remover Tool

KYZ Design

<p>After watching standard 1x1 bins print infill layer after infill layer that could have been used for storage, this is one of the first 3D print models I've designed. I've since refined it, with the following features:</p><ul><li>0.84mm thick walls - a 0.4mm nozzle will do this in 2 passes</li><li>0.75mm thick base - designed for 3 layers of 0.25mm (but prints fine with 0.20mm layers)</li><li>Label shelf versions have 7mm wide label areas designed for 6mm wide labels</li><li>No magnet holes</li><li>Changes to fillets and chamfers</li><li>Other minor changes</li></ul><p>It is highly recommended to print 2 more at a time for a more consistent outer wall surface gloss. With just one bin, you might see that some sections are more glossy than others due to your filament profile's layer time limitations.</p><p>&nbsp;</p><p>Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my other Gridfinity models and</p><p>check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models.</p>

Gridfinity Deep 1x1 Divider Bins

gridfinity

cosimol79

<p>Mattoncino costruzioni 2x1 di grande formato (31.6 di larghezza e 19 altezza)</p><p>Large format 2x1 construction brick (31.6 wide and 19 high)</p><p><br><br> </p>

Mattoncino costruzioni 2x1 -construction brick 2x1

bricks

B-Engineer

<p style="text-align:center;"><i><strong>----------if you like my work please, follow me and spread some love giving some like, ill do the same❤️---------</strong></i></p><p style="text-align:center;"> </p><p><a target="_blank" href="https://buymeacoffee.com/b.engineer" rel="nofollow noopener"><span style="color:rgb(225,71,71);"><strong>Buy me a coffee</strong></span></a></p><p>&nbsp;</p><p>&nbsp;</p><p>This fidget spinner is meticulously crafted with dual-spiral teeth featuring an optimized angle for smooth and enduring motion.</p><p>This version incorporates the use of buttons on the central wheel for enhanced comfort and an external profile optimized for maximize finger gripping.</p><p>&nbsp;</p><p>→In order to assemble buttons it is necessary to pay attention and apply adequate pressure as the tolerance is narrow to prevent them from coming off during use.</p><p>→Before obtaining a fluid and lasting movement it is necessary to rotate the spinner for some time in order to smooth out the sharp edges</p><p>&nbsp;</p><p style="text-align:center;"><strong>❤️If you appreciate mine work please, give a look at mine new Valentine&#39;s Version❤️</strong></p><figure class="image image_resized" style="width:69.69%;"><a href="https://makerworld.com/en/models/177292#profileId-194977" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144741/design/2024-02-09_ab4c3a99953b1.webp"></a><figcaption> </figcaption></figure><p>&nbsp;</p><p>If you want any modifications or variations, feel free to ask.</p><p>Additionally, if you have specific requests for a spinner you would like to have, write to me privately, and I will do my best to fulfill your desires</p>

Planetary Gear Fidget spinner - Racing version

toys

Kevbot.

<p>Watch out! This little guy is very spiky and can bite! 🐊</p><p>&nbsp;</p><p>The goal of this design was to make an aesthetically pleasing crocodile clip that was print in place and also functional, which I believe was achieved 😎. The clip is mainly just for amusement but may have some practical applications.</p><p>&nbsp;</p><p>This model is for PERSONAL USE ONLY, if you want a commercial license and access to more awesome models you can get it on my patreon <a target="_blank" href="https://www.patreon.com/kevbot_3d" rel="nofollow noopener">https://www.patreon.com/kevbot_3d</a></p><p>&nbsp;</p><p>Like with all my models, I went through many iterations to make sure it was strong, and easy to print without supports.</p><p>&nbsp;</p><p>Please feel free to share images of your prints on this page, I would love to see them.</p><p>&nbsp;</p><p>Thank you for the support, and I hope you love the Croc! Let me know if you would like to see any other animal clips! Happy Printing!</p><p>&nbsp;</p><p>Sincerely,</p><p>Kevin</p><p>&nbsp;</p><p>ALL KevBot. designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.</p>

skadis

nice

a1

gridfinity

bricks

toys

tools