EmbraceNext

Meister Edel

Heyho&nbsp;For a small project I did need some minimalistic brackets! Since I didn't particularly like most of the versions already available online, I quickly constructed a few myself and ended up installing this ones. After that Project I was asked to design a corner bracket in a similar way. So here it is!&nbsp;Design IdeasRound Corners  There are no hard edges to ensure a beautifully minimalist shape that no one can bump into unpleasantly :)HardwareOnly 3 wood screws (contersunk as standard or flathead) are required for assembly. Two 4 mm ( x 20 mm +) screw to attach the angle and one 3 mm ( x 8 mm +) screw to attach the bracket.  Cap  I Added 2 Cap versions. One that can be printed standing upright and one that can be printed lying down. The upright one  looks cleaner but eventually needs a brim. The lying one doesn't look that clean later on but is easier to print.ScalingYou can scale the model up/ down if you like! But keep in mind that the Screw sizes will also change!  Print Instructions:I printed the Brackets in 0,2 mm layer height, 30% Infill and 4 Perimeter with PETG. But PLA ore even more technical materials should work too :)  If you want to max out the stability then go for 100% infill. Seams:<figure class="image image_resized image-style-align-center" style="width:53.11%;"><img src="https://media.printables.com/media/prints/814841/rich_content/edc8d370-bb39-4d5a-9438-68c7e57cf0cb/image.png#%7B%22uuid%22%3A%226d9ead0a-0867-4d4a-83d8-43647a9e1441%22%2C%22w%22%3A958%2C%22h%22%3A628%7D"></figure><figure class="image image_resized image-style-align-center" style="width:52.73%;"><img src="https://media.printables.com/media/prints/814841/rich_content/be543ac9-1768-4d72-ada0-0ff95e87b474/image.png#%7B%22uuid%22%3A%22348b0e15-8cab-4ead-95bd-be68eee893be%22%2C%22w%22%3A428%2C%22h%22%3A410%7D"></figure> Have fun! And If you like my work share it and consider leaving a small donation so I can continue to publish my work!

Minimalistic & smooth Corner Bracket

Tools

andythilo

This is my Voronoi edition of the Bambu reusable spool. Retains the filament marker inserts from my Honeycomb spools along with filament retension holes for re-spooling and tab for use with bambu refills. The tab can be easily cut off if needed. &nbsp;I have also re-sized this slightly adding 1mm to each side. Using a 100% infill (only adds 15g of filament per side), this brings its weight to match the OEM bambu spool as seen in the photos. The spool runs perfectly in the AMS. &nbsp;Filament markers can be downloaded from my Honeycomb edition spool - https://makerworld.com/en/models/73599#profileId-105962

Bambu Spool - Voronoi Edition

Printer Upgrades

Nico91

<h2>Star Wars Logo Lithophane Lightbox.</h2><h2>New version with Color Litho under Raw model files.</h2><h2>Please use my print profile. Otherwise, the model does not have any holes for an LED cable to pass through.</h2><h2>Lightbox size is 240x106.</h2><h2>100% Infill and 0.1mm Layer for the Litho.</h2><h2>I used 1 meter of led wire fairy lights. It is a little more difficult to mount the LED strip. But with a little patience it works :)</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/826394/2024-01-31_131530559a15c8.jpg"></figure>

Star Wars inspired Lithophane Lightbox LED Lamp 

Decorations

vitaprint 3D

This is a perfect Box for your Bambu Lab Spare Parts. I made all Bambu Lab printer Models to a Lid Design.You need foloowing Screws to complete it:&nbsp;<ul><li>M3 x 30 = 4 pcs (for the Hinges)</li><li>M3 x 35/40 = 2 pcs (for the Handle)</li></ul>&nbsp;Big Box:230 x 210 x 70<a target="_blank" href="https://makerworld.com/en/models/105260" rel="nofollow noopener">https://makerworld.com/en/models/105260</a>230 x 210 x 140<a target="_blank" href="https://makerworld.com/en/models/92348" rel="nofollow noopener">https://makerworld.com/en/models/92348</a>&nbsp;Small Box:175 x 130 x 110:<a target="_blank" href="https://makerworld.com/de/models/97173" rel="nofollow noopener">https://makerworld.com/de/models/97173</a>175 x 130 x 70:<a target="_blank" href="https://makerworld.com/de/models/408354" rel="nofollow noopener">https://makerworld.com/de/models/408354</a>

Tools

Printer Upgrades

Decorations

Organization

Christmas