Ehlersd

Eternity Labs

<h3>The Condenser Coaster - Hexagon</h3><h3>Features:</h3><ul><li>These engineered coasters have been made to collect the drops of condensation or other liquids that slide from your glass.</li><li>The Coaster Insert has special channels to allow liquids to flow easily between sections, collecting in the Drip tray.</li><li>The insert can then be removed and the tray can be emptied of any excess liquids and then reused.</li></ul>&nbsp;This works well for hot countries, icy cold drinks, beers out the cool box or even just cold drinks on a hot day!&nbsp;Each section of the bottom coaster insert can be coloured individually for a virtually infinite set of colour patterns if you are creative enough!&nbsp;Print Profiles added contain the coaster and drip tray separated and also A1 Mini Profiles.&nbsp;Stand for 4x coasters is in a separate print profile.&nbsp;Consider giving me a boost if this model was useful!&nbsp;Ways to support me &amp; access to commercial licences:&nbsp;<a target="_blank" href="https://www.patreon.com/Eternity3D" rel="nofollow noopener">https://www.patreon.com/Eternity3D</a>  - Free membership available for some .stl access, paid membership needed to resell prints of my designs.&nbsp;One Time Direct support - <a target="_blank" href="https://buymeacoffee.com/eternity3d" rel="nofollow noopener">https://buymeacoffee.com/eternity3d</a>

Condenser Coaster - Hexagon

Coasters

Fletch

This is one of my all time favorite games and locations. This map always reminds of the fun I had playing A Link to the Past with my siblings for hours when we were younger, hunting for the Master Sword or finding all of the chests in the dungeons throughout the world. Makes a great addition to any game room or just some wall art. I tried to make it as accurate as possible. With the size of model, I wasn&#39;t able to add some of the smaller details since they wouldn&#39;t print well. I hope you enjoy it!&nbsp;You can find the Dark World map here:<a target="_blank" href="https://makerworld.com/en/models/456194" rel="nofollow noopener">Zelda A Link to the Past - Dark World</a>&nbsp;A frame stand for displaying on a bookshelf or table can be found here:<a target="_blank" href="https://makerworld.com/en/models/456210" rel="nofollow noopener">Zelda A Link to the Past Map - Frame Stand</a>&nbsp;There is a separate profile for a frame with a hole in the back for hanging on the wall.&nbsp;ColorsGray - Overture PLA Plus Space GrayLight Brown - Overture PLA Plus BrownDark Brown - Hatchbox PLA BrownLight Green - Inland PLA Matte GreenDark Green - Elegoo PLA GreenBlue - Hatchbox PLA BlueRed - Hatchbox PLA RedBlack - Elegoo PLA Matte BlackYellow - Hatchbox PLA Yellow&nbsp;ProfilesThere are multiple profiles available to account for no AMS, one AMS, or two AMS. I have included mini profiles as well. It takes 9 colors to do the full color map and frame and I have provided a profile that will allow you to print all 9 colors using a single AMS.

Zelda A Link To The Past Map

Arcade Game Scenes

MadMax3D

100mm earth lithophane mounted on a lighted base. The lithophane is printed in white and then painted with water colors. I&#39;m no artist. I used a cheap kid&#39;s set of water colors and just tinted the painted areas. You don&#39;t need much color to make it pop. The lighted base is included in a separate profile. Update 2024-05-07: My sincere apologies. A user discovered an error in the earth profile. I had inadvertently turned on “detect thin walls” which causes holes and marred areas in the globe.  If you have already printed it, please re-download the current profile or turn off “detect thin walls” in the slicer. Sorry for the inconvenience.&nbsp;<a target="_blank" href="https://makerworld.com/en/@MadMax3D/collections/1204492" rel="nofollow noopener">Check out my other spherical lithophanes</a>&nbsp;Purchased PartsI used <a target="_blank" href="https://www.amazon.com/gp/product/B0BBPHF58T/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1" rel="nofollow noopener">these</a> USB Light SticksAny <a target="_blank" href="https://www.amazon.com/dp/B08FM5JHH1/?coliid=IZ55K9HKA3GJ8&amp;colid=2P141A3WT8ECQ&amp;ref_=list_c_wl_lv_ov_lig_dp_it&amp;th=1" rel="nofollow noopener">USB extender</a> cables will work.<a target="_blank" href="https://www.amazon.com/dp/B08C7XF63J?ref=ppx_yo2ov_dt_b_product_details&amp;th=1" rel="nofollow noopener">Water color paint set</a>&nbsp;Printing InstructionsMy profile has all my preferred settings. If you prefer to plate your own (stl&#39;s in the raw files section), I suggest the following settings:<ul><li>If using my print profile, make sure to select your printer type, plate type and filament profile from the drop down menus in the slicer.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454410/design/2024-04-27_8bad4f8ca501b.png"></figure><ul><li>I printed the lithophanes at .2mm layer height with two height range modifiers (10-15mm and 98-120mm) set at .1mm layer height. This reduces the gaps in the flattest parts of the sphere.</li></ul><figure class="image image_resized" style="width:34.45%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454410/design/2024-04-27_0a6d030ad144.png"></figure><ul><li>You could set the layer height for the whole sphere lower (like .1mm), but it will take longer to print.</li><li>4 walls, 100% rectlinear infill, arachne wall generator. (arachne takes longer to slice, but generates a better print in my opinion)</li><li>I slowed down the outer wall speed to 50mm/s</li><li>The light base should be set to .2mm layer height and 15% infill of choice.</li></ul>Make Your Own Lithophanes Using My Light BaseYou can generate your own lithophanes using your own photos at <a target="_blank" href="https://lithophanemaker.com/Lithophane%20Sphere.html#processing" rel="nofollow noopener">Lithophanemaker.com</a>. The lithophane can be set for any diameter as long as the base is the correct size to fit in the lighted base. Your photograph should be approximately 3.3:1 width to height ratio to wrap all the way around the sphere.<figure class="image image_resized" style="width:51.63%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454410/design/2024-05-05_63446faefbb8.jpg"></figure>&nbsp;I used the following settings:Lithophane Resolution: 0.25 Sphere Diameter: 100 Picture Angular Height: 130 Picture Angular Width: 360.00 Maximum Thickness: 2.7 Minimum Thickness: .8 Cylinder Outer Diameter: 40 Cylinder Height: 10 Cylinder Thickness: 5 Cylinder Ledge Outer Diameter: 50 (make sure this is set to 50mm to fit into the light base) Top Hole Outer Diameter: 0  &nbsp;

Earth Lithophane 100mm

Globes

💡Idea Prints✔️

compared to the original I made 2 remixes 1 with the text and one with a small base for those who want to print it in less time<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439089/design/2024-04-22_829cc7f8e3416.jpg"><h4>👋 Hello😁 ★·.··.·★</h4>Before reading the description I recommend in the future to look at the collections created by me for better service for high projects is to distinguish them better💚MAKERWORLD→ <a target="_blank" href="https://makerworld.com/en/@Idea/collections" rel="nofollow noopener">COLLECTIONS</a><figure class="image image_resized" style="width:43.37%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439089/design/2024-04-17_48a44efd4053d.gif"><figcaption>try to give us a big boost each of you can give it every 7 days with your little help you will give a big hand always remember it🚀</figcaption></figure>&nbsp;remix→ https://www.thingiverse.com/thing:1541512

Mother's Day Sculpture

Mother’s Day

jdicerchio

With Memorial Day coming up I just wanted something to hang around the house and designed this along with a flag version. A little glue is required to put the two pieces together as it is slightly bigger than the 256mm print bed

Stars Holiday Door Corner Decor

Door Corner

ChainsawGraphics

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x155.6mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Brown Transmission Distance: 1.4 PLA PolyTerra Earth Brown Transmission Distance: 0.5 PLA Tpoimns Flesh Transmission Distance: 7.5 PLA BambuLab Matte Scarlett Red Transmission Distance: 1.9 PLA BambuLab Matte Desert Tan Transmission Distance: 0.4 PLA BambuLab Matte White Transmission Distance: 3.5 This print uses 7 unique filamentsSwap Instructions: Start with Charcoal Black At layer #10 (0.52mm) swap to Brown At layer #14 (0.68mm) swap to Earth Brown At layer #17 (0.8mm) swap to Flesh At layer #26 (1.16mm) swap to Scarlett Red At layer #29 (1.28mm) swap to Desert Tan At layer #40 (1.72mm) swap to White for the rest.

Nuka Cola Rusted Sign from Fallout

Fallout

CH682

Badezimmer Accessoires - Bathroom accesoires kein AMS notwendig - no AMS necessaryTeile ineinanderstecken unf ggf. verkleben - assemble the parts together, maybe use a little bit glueSet besteht aus - set contains<ul><li>Haken rund zum kleben - round hook for gluing</li><li>Haken rund zum verschrauben - round hook for screwing</li><li>Haken eckig zum kleben - hook for gluing</li><li>Haken eckig zum verschrauben - hook for screwing</li><li>Duschhaken 6mm Glas - shower hook for 6mm glass</li><li>Duschhaken 8mm Glas - shower hook for 8mm glass</li><li>Duschhaken 10mm Glas - shower hook for 10mm glass</li><li>Duschhaken 28mm Glas - shower hook for 28mm glass</li><li>Toilettenpapierhalter Buegel links Klebevariante - holder for toiletpaper arm left gluing version</li><li>Toilettenpapierhalter Buegel links Schraubvariante - holder for toiletpaper arm left screwing version</li><li>Toilettenpapierhalter Buegel rechts Klebevariante - holder for toiletpaper arm right gluing version</li><li>Toilettenpapierhalter Buegel rechts Schraubvariante - holder for toiletpaper arm right screwing version</li><li>Seifenhalter - soap box</li><li>Q-Tip Spender - Q-Tip dispenser</li><li>runde Box - round box</li><li>Zahnbuerstenhalter manuell 1-fach - storage for manual toothbrush single</li><li>Zahnbuerstenhalter manuell 2-fach - storage for manual toothbrush double</li><li>Zahnbuerstenhalter manuell 4-fach - storage for manual toothbrush quattro</li><li>Zahnbuerstenhalter elektrisch 1-fach - storage for electric toothbrush single</li><li>Zahnbuerstenhalter elektrisch 2-fach - storage for electric toothbrush double</li><li>Zahnbuerstenhalter elektrisch 4-fach - storage for electric toothbrush quattro</li><li>Halter fuer Rasierer - shave holder</li></ul>

Bicolor Bathroom Accesoires Mix - no AMS 

Bathroom

EDDIEB3D_

.2 layer height needed for best resultsColors usedElegoo BlackSunlu Yellow

Suspended Batman Logo 

Suspended 

Mike_N

Made this for a friend, figured others may like it. Just watch out for wisps and stray bits

Five Nights At Freddy's Lightbox

fnaf

Reuter_Corp.

<h2>Shadowbox - USA</h2>6 layers.instruction pictures will follow very soon. Thanks Hope you enjoy!Happy printing!see you next one.

ShadowBox - USA

Shadowboxes

Galactic Armory

Make your own Galactic Armory themed Spartan helmet!&nbsp;Based off concept art from GC_ConceptArt, this is an envisioning of the classic Galactic Armory logo with a Halo Spartan helmet!&nbsp;The faceplate is able to be removed with the help of 10mm x 3mm circular magnets!&nbsp;Includes both assembled and pre-separated versions for easy printing.&nbsp;Use the visor cutout template to trace an outline on your visor material. Then slot the cut out shape into the pre-modeled ridges on the inside of the helmet!&nbsp;You'll also find the large parts have been pre-cut for smaller printers.&nbsp;If you would like to use these files for commercial use, please subscribe to the "Specialist" tier of my Patreon here: https://patreon.com/galacticarmory

Galactic Armory Spartan Helmet

cosplay

scoutnerd2717

Nerf Silencer

nerf

Slowpoke's Workshop

cute little rabit for eater decoration&nbsp;

Easter Bunny

Easter

k2thestank

Easy to print and even more fun to play!&nbsp;Suggested Print settings:<ul><li>White and Blue PLA</li><li>45-75mm/s outside walls</li><li>4 or 5 Top/Bottom layers</li><li>3 walls</li><li>10% infill</li><li>No supports Required (we built them in for you)</li></ul>print everything face down or use your pre setup file for easier printing!&nbsp;I added a simple 8 Sided Die to the print files i recommend printing it at 0.1mm if you dont already have one&nbsp;

Penquin Peril

Games

thingspatprinted

These are STL files used to create the 3D printed Autobots Transformer Neon LED sign. Entire model is around 19 inches tall and 19 inches wide. Other materials used to build are listed below. I print in multiple pieces and use a soldering iron to weld the pieces together. I haven't had the time to build this one yet, if I do I will add some photos of the completed project.Neon LED strips: There are several brands available. Some are cuttable every 1 cm (Lamomo brand), others are cuttable every 2.5 cm (Meijiajia brand). I've linked the 2 types below. Use any color combination you'd like and I would love to see how it turns out.Lamomo:<a target="_blank" href="https://www.amazon.com/dp/B08SJ6DSZR?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B08SJ6DSZR?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>Meijiajia:<a target="_blank" href="https://www.amazon.com/dp/B096FF6FSB?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B096FF6FSB?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>12 volt Power supply:<a target="_blank" href="https://www.amazon.com/dp/B00FEOB4EI?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B00FEOB4EI?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>Cable to attach end of Neon LED strip to on/off switch:<a target="_blank" href="https://www.amazon.com/dp/B01GPQZ4EE?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B01GPQZ4EE?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>On/Off Switch:<a target="_blank" href="https://www.amazon.com/dp/B0895NVJLF?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B0895NVJLF?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>Optional, instead of on/off a dimmable switch can be used:<a target="_blank" href="https://www.amazon.com/gp/product/B07KW4NCCJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B07KW4NCCJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1</a>

Autobots Neon Sign

Neon Signs

Jakob1508

I love technic bricks and 3d printing. why not both in one.i have used filament from aurapol for best L-ego colors.if some parts are to loos i used a lighter and softend the part and for example on an axle you can make some dents with the fingernail to make it a tiny bit stiffer fit.

200% brick class tractor xxl

Legos

SH Designs

This Easter Morning scene consists of 3 flat panels and a base which holds each panel slightly curved. No glue needed. Use an LED candle or fairy lights to light the scene for a dramatic effect. Each panel is setup to print face down on the bed to produce a nice texture.&nbsp;There are two base options: With spaces to hold LED tea lights, or without. UPDATE: I changed the bases to print facedown on the bed - they look much better with the texture on the top. The LED light version will have supports that are to be removed after printing.&nbsp;UPDATE #2: Added a smaller size to fit the A1mini or for those wanting a smaller scene.  Thank you to @moneyman89 for the suggestion&nbsp;If you like this model, check out the <a target="_blank" href="https://makerworld.com/en/models/64103#profileId-67178" rel="nofollow noopener">3 piece nativity set</a> next Christmas!

Easter Morning Scene

OJum

The grau 5.56 from Warzone in is best versions in my opinion.With barrel tempus 26.4" Archangel and 50 round mags.You can find some upgrade on my account.Size: 90cm Look carefully at the pictures for assembly, especially at the 3 parts of the barrel.Connector hard: They hold well but are difficult to fit in.Connector light: They hold little but are easy to fit in. Practical if you want to align the parts to stick them.

grau 5.56

SavageLau

<h2>If you want a commercial license, check out my bio and get it from Patreon.</h2><h2>Personal use only.</h2>&nbsp;This model is design for MakerWorld light contest (2/5). Complete free version is only available on here Makerworld. <h3>Many people have contacted me said they willing to pay for the model. Other platform product manager reach and out said I could use their platform and selling this design for some money, but I have decided to keep it here for free for now. So there will be more people could enjoying it :) So show me your finshed print, I would like to see it. </h3><h3> Anywhere else you see this model upload is Unauthorized (please notify me and report them), beside my own account (SavageLau). </h3>&nbsp;<h2>If you would like purchase LED light needed for this design and filament from Bambu Lab Offical website: Affiliate link is below, so I can get some commission to support my future work. </h2><h2><a target="_blank" href="https://shrsl.com/4h4np" rel="nofollow noopener">https://shrsl.com/4h4np</a> </h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-03-23_4ad27b7082fe3.png"></figure><h2>Filaments that I use for this project: (Bambu Lab Offical website:)</h2><h2><a target="_blank" href="https://shrsl.com/4h4ns" rel="nofollow noopener">https://shrsl.com/4h4ns</a> </h2>&nbsp;&nbsp;&nbsp;<h2>You may also like this design:</h2>PeaShooter Lamp Kit 001. <a target="_blank" href="https://makerworld.com/en/models/174475#profileId-191833" rel="nofollow noopener">https://makerworld.com/en/models/174475#profileId-191833</a> &nbsp;&nbsp;&nbsp;My boss saw some Bellsprout light the other day and she want me to design one. I have one LED Lamp kit come with my a1mini and sitting for a while. So why not turning it into what she want. So the design started adpot the lamp kit into Bellsprout.I found this pic on Google, based on the posture and proportion started deisng.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_bc131748fd272.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_33679f29d502a.png"></figure><h2>Update: </h2><h3>2/2/2024. A new profile was made for a1mini. Increased infill/walls on base and body part. </h3>Model main body have been reduced in size inorder to meet the build plate size for a1mini with muti-color prints. &nbsp;<a target="_blank" href="https://makerworld.com/en/u/2010665163" rel="nofollow noopener">@Sascha2202</a> feedback it is a bit hard to keep banlance. Weight increased on printing profile by adding more infill and walls. Weight for that part from 160g to 202g, lowered center of gravity. Consider head is around 40g + led weight, it should do well now. <h3>2/1/2024. Joints redesigned. </h3>Improved joints firction load, strength, tolerancing. New turning angle sets around 13.5 degrees max for each joints. <figure class="image image_resized" style="width:36.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_d00693a8b7acb.png"></figure>“Head” part fit and finish improving. <h3>Revisions and Tests today:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_ffe7e41994dec.png"></figure>&nbsp;<h2>Before you print(Important!):</h2>Run the joint test print first with the filament you are going to use for joints and body, before you doing the full print! This is important. Depend on filaments you use for the joint parts, there will be sinkage rate difference, and firction load on joint will be different.&nbsp;I put very tight tolerancing on design, but it may not work as intended when you printing with your filaments, so run the test and confirm joints is very tight to each other. Other wise You will not get the desired result.&nbsp;&nbsp;Joints with other parts are standard size. There is one “Tight” profile for joints. There are two types of joint, regular and with wire clip one. You will need to print total of 12 or above (maybe less than 15) to get good proportion. &nbsp;Joints designed best work with 4 wall layers, and 10% to 20% infill, adding more infill will not improve the strength, will only leading part failure during assembly. &nbsp;<h2>Hard ware:</h2>This design require Lamp LED Kit 001 from Bambu Lab. All other parts are printable. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_bca061fd80f1d.png"></figure>&nbsp;<h2>Post work:</h2>Removing brims from all parts, when you remove brim from joints part, confirm it is fully removed. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_dec1b2c670225.gif"></figure><h2>Assembly:</h2>Refer these gif image. Joints is a bit hard to push in, refer how I do it, holding the bottom part with you fingure, it will reduce the change of failure. &nbsp;Joints:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_5c978e23e8634.gif"></figure><figure class="image image_resized" style="width:51.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9f2e463b2d8a6.gif"></figure>Fully assembly:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9a975d341b61f.gif"></figure>&nbsp;&nbsp;&nbsp;<h2>Design:</h2>Lamp kit is 60mm dia, 8mm thickness. based on that dims and make rough draft to evaluate the overall size.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_34bf66e6b20e5.png"></figure>&nbsp;Working on some parts, and integrate them in the end.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_4880a9ab2336a.png"></figure>&nbsp;I started with wanting ball joint on the head, so it will able to turn angles. End up why not to have more ball joints on the body.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_b08f0ea2e5ee9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ec7f991cbaa.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ed16d7dd498.png"></figure>&nbsp;Ball joints is pain in the axx to work with. I want it to have a lot of friction load in normal condition. so the outter shell shall have very small tolerance to the ball or even smaller. Ended spending a lot of time try in truth to testing out different tolerances and make design revisions.Still not perfect, but it work for this application. You gain a lot of DOF, but it is a bit brittle, depends on your materials.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_153933e0ba5bb.png"></figure><h2>Revisions and tests:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_641c974fd0d58.png"></figure>

BellSprout Lamp LED Kit 001

Lamps

Mark Dra

This is my Ghostbusters logo coaster!An easy win for all Ghostbusters fan!&nbsp;This is a fast and easy print, measure 90x90x3 mm.Use my print profile for a perfect first layer!&nbsp;If you like my model please consider to gime me a BOOST or two! This really help me to create new models! ;)Enjoy!

Ghostbusters Coasters

Ghostbusters

Elessar3141

This are simple coasters with the Star Trek Badge and colored for the AMS :) I hope you will enjoy them :)

Star Trek Coaster

Star Trek

The Crafty Maker

In the climactic duel on the Death Star II in "Star Wars: Episode VI - Return of the Jedi," Luke Skywalker confronts Darth Vader amidst the Emperor's throne room. The intense lightsaber clash symbolizes Vader's internal conflict between the dark side and his familial ties. As the battle unfolds, Vader's humanity resurfaces, leading to his ultimate redemption. He saves Luke from the Emperor's grasp, fulfilling the prophecy of the Chosen One and restoring balance to the Force in a pivotal moment of the saga.&nbsp;I've used the following colors:<ul><li>Plate 1:   - Geeetech PLA White - at layer #3 - 0.6mm swap to Fillamentum ExtraFill PLA Electric Grey - at layer #7 - 1.4mm swap to Fillamentum ExtraFill PLA Iron Grey</li><li>Plate 2:   - Geeetech PLA Black - at layer #4 - 0.8mm swap to Geeetech PLA White - at layer #6 - 1.2mm swap to Fillamentum ExtraFill PLA Traffic Red - at layer #8 - 1.6mm swap to Fillamentum ExtraFill PLA Luminous Green</li><li>Plate 3:   - Fillamentum ExtraFill PLA Electric Grey - at layer #3 - 0.6mm swap to Fillamentum ExtraFill PLA Iron Grey - at layer #6 - 1.2mm swap to Geeetech PLA Black</li><li>Plate 4:     - Prusament PLA Gravity Grey   - at layer #4 - 0.8mm swap to Fillamentum ExtraFill PLA Iron Grey - at layer #6 - 1.2mm swap to Fillamentum ExtraFill PLA Electric Grey</li><li>Logo: Geeetech PLA Black + Geeetech PLA White </li></ul>The colors are just guidelines, you can get creative with the color scheme for a personal touch.&nbsp;It consists of 4 numbered plates.&nbsp;I've also added a Star Wars logo that you can attach to the shadow box.&nbsp;You can find the box to display this set here: <a target="_blank" href="https://makerworld.com/en/models/13471" rel="nofollow noopener">https://makerworld.com/en/models/13471</a>&nbsp;The box with lid and the wall mountable box are both Patreon/Printables/Thangs subscriber exclusives. (Box with lid also available for individual purchase on <a target="_blank" href="https://cults3d.com/en/3d-model/art/shadow-box-with-lid-thecraftymaker" rel="nofollow noopener">Cults3D</a>)&nbsp;Print settings&nbsp;Plates<ul><li>No supports</li><li>100% infill</li><li>Arachne wall generator recommended</li></ul>Logo<ul><li>Basic supports with top Z distance of 0.24</li><li>100% infill</li><li>Arachne wall generator recommended</li></ul>ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Star Wars Duel on Death Star II Shadow Box

Star Wars

3D Prints This Week

If you size it down, keep the “z” at 100 or it will be too think.&nbsp;Load black and white into AMS.&nbsp;If you don't have ams, see below&nbsp;Swap Instructions:Start with BlackAt layer #14 (1.2mm) swap to White for the rest.

Calvin and Hobbes Genius / Wall Art / Funny / Deco

Janet

3DPrintCess

I designed this mural for big and small Disney or Frozen fans, I hope you like it!

Elsa - Frozen - Wallart

Granddaughters

Wall Art - Mountain sea update 23.1.24 → modified the sun !! Edit 17.01.24 : puzzle pieces were not tight enough, i improved them !! In total about 1.2m long by 33cm wide I splited the file in 10 parts, 7 plates to print + the connector puzzelsFor assembling, take some Uhu hard plastic glue and put the thiny connectors in place.done.<figure class="image image_resized" style="width:42.82%;"><img src="https://makerworld.bblmw.com/makerworld/draft/449623/2024-01-17_1513099af86e1.jpg"><figcaption> </figcaption></figure>&nbsp;hope you enjoy. let me know for improvements

Wall Art - Mountain sea

Wall Art

technerd

I&#39;ve made a cute shadow box from Basic PLA for valentine&#39;s day with various designs for the couples. Choose which couple you like most and put a total of 6 inserts (textured side facing down) into &#34;case_front&#34;. They have numbers from 001-006 on the build plates, and should easily slide down into the casing.&nbsp;Depending on which lights you want to use, Bambulab USB or Amazon battery powered you can put fairy lights through the hole of &#34;case_back&#34; and fix them with some tape or use the pegs that are around the hole to form a circle. Check the photos for details. Fix the battery box with double sided tape into it&#39;s place. I bought a 3 meter fairy light (warmwhite) that uses 3x AA batteries so they last way longer than the version with the button cells. For the Amazon link to the warmwhite or RGB fairy lights - scroll all the way down.&nbsp;UPDATE 2024-03-27: created a collection with all my available inserts for the shadowbox. They can be combined with each other <a target="_blank" href="https://makerworld.com/en/@technerd/collections/962148" rel="nofollow noopener">https://makerworld.com/en/@technerd/collections/962148</a>&nbsp;UPDATE 2024-02-12: included STEP files for “007_diy_empty_insert” and &#34;case_back_003_RGB_fairy_lights&#34; if you want to create your own inserts in Fusion360 or change the backplate to fit your own lights.&nbsp;UPDATE 2024-02-02: new “case_back_003_RGB_fairy_lights.stl” now compatible with both models 3m/10ft &amp; 5m/16ft RGB fairy lights - I made the pegs longer &amp; bigger circle diameter to fit the bigger battery box from RGB lights.&nbsp;UPDATE: Btw. you can also use RGB fairy lights - here is what they look like in different colors:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-26_002518b3be6b18.jpg"></figure>&nbsp;Print the &#34;case_cap&#34; 2x and slide them over the front and back of the heart. They&#39;re press fit and should stay in place, if not use some drops of glue or double sided tape. The overall size of the box is 215mm x 215mm.&nbsp;For perfect results make sure to use the golden textured PEI plate and calibrate your filament.Check out the Youtube Video below on how to assemble it.&nbsp; Copyright:All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds. If you want to sell my prints commercially and legally, you can join my Patreon: <a target="_blank" href="https://www.patreon.com/technerd863" rel="nofollow noopener">https://www.patreon.com/technerd863</a> The digital files (STL and other formats) may never be resold, shared, remixed or given away.&nbsp;&nbsp;I will try to add new inserts for the box from time to time. Just check my profile or my collections for new uploads like the new castle Neuschwanstein inserts. Until now these are the included designs here. Happy printing!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-25_167328f55390e.jpg"></figure>&nbsp;Btw. these are the fairy lights (warmwhite and RGB) that I got from amazon. Size of the battery box is 74mm x 51mm x 19mm. It has an integrated timer and stays on for 8 hours, so the 3x AA batteries should last 1-2 months. &nbsp;3M warmwhite <a target="_blank" href="https://amzn.to/3V6ZIdr" rel="nofollow noopener">https://amzn.to/3V6ZIdr</a>5M RGB with remote control <a target="_blank" href="https://amzn.to/44UPHDw" rel="nofollow noopener">https://amzn.to/44UPHDw</a>(I may earn a commission if you use the above Amazon Affiliate links. This will help me to upload the designs for private use for free)&nbsp;The new “case_back_003_RGB_fairy_lights” is compatible with both models RGB and warmwhite!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_87cee228f36e2.jpeg"></figure>&nbsp;New Inserts! Castle Neuschwanstein. Download them here: <a target="_blank" href="https://makerworld.com/en/models/167285" rel="nofollow noopener">https://makerworld.com/en/models/167285</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_736a10798e406.jpg"></figure>&nbsp;

Lovers Valentine Day Shadowbox

Valentines 

Printednest

CAR-A-MEL | FULLY 3D PRINTABLE TOY CAR KIT&nbsp;All about this project - <a target="_blank" href="https://www.printednest.com/caramel-r1" rel="nofollow noopener">Caramel R1</a>Assembly guide - <a target="_blank" href="https://www.youtube.com/watch?v=2QrN8Uxs8ac" rel="nofollow noopener">on YouTube</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_71d09720569fd.jpg"></figure>&nbsp;What is CARAMEL&nbsp;CARAMEL is fully 3D printable (FDM) toy car consisting of 40+ parts, printed without supports. All you need is our data and your 3D printer and you can easily manufacture your own toy in the comfort of your home. In case some part get lost or broken, no worries – just re-print the missing or broken element and the toy is fully functional again.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_122084988a50a.jpg"></figure>&nbsp;CUSTOMISABLE - You can make your toy in any scale and any colour combination you can think of – you can try to print it as small as possible, while still being fully functional, or you can go the opposite direction and make it as big as your device allows you - all black, from carbon, big one or fast printed? It's a game, it's your decision. No rules, no restrictions, push your limits.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_5bf31debe539f.jpg"></figure>&nbsp;SUSTAINABLE - Toys can be damaged or broken in the heat of the play, sometimes that is the end of it – not with CARAMEL. You can only print the damaged part and make your CARAMEL fully functional again.We ship data only, nothing else, so there is no carbon footprint; the kit needs no supports to print, so there is no waste and everything fits perfectly without a single drop of glue.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_e1ef006664b03.jpg"></figure>&nbsp;EXTENSIBLE - We are developing NEW extensions and custom parts, so if you or your child are tired of your CARAMEL, you can easily upgrade it.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_6122e7f1d458.jpg"></figure>&nbsp;OPEN DESIGN - We would like to hear your thoughts and get your feedback. Do you think CARAMEL can be improved? Do you have an idea for custom parts? You can become part of the design process – let us know your ideas and we can make them reality. You can send us your designs and we will share them with community, for FREE.

Caramel R1 Car assembly kit

Print ASAP

peterow

Mountain Range Reflection is a truly stunning piece that looks fantastic in any room!

Mountain Range Reflection Amazing Wall Art 

Wall Decorations

Eliauk

相对于第一代架子增加了上层坡度和优化了耗材用量看起来也更美观了

egg rack v2（鸡蛋架）

Kitchen

MinimalistGaming

Compatible with Unsettled Board Game by Orange Nebula. Fit ALL game content in the core box with no lid lift (9 planets plus Specializations and Fascinations Expansions).&nbsp;This organizer contains a new framework tray for the bottom of the core box and 9 planet trays. The framework tray fits everything it did before PLUS the Scientific Specializations, Scientific Fascinations, and Luna's Synthesizer expansions. Each planet tray fits all planet content except for the instructions. The planet instructions can be stored together in the box on the top tray (see pictures). --> FYI - Planet trays WILL NOT work with sleeves.&nbsp;Enjoy!

Unsettled Organizer - Storage Solution Insert Fits All Expansions in Core Box

Game Inserts

PartyLime

Chess set I whipped up a few years agoInspired by make anything youtube channel&nbsp;Only the king and knight require supports

Modern Chess Set

Chess

MKCAMC

I designed this modular spice rack to be stacked as high as you need it. Then a lid is placed on to to allow you to place items on top of the rack. It can be kept on the counter of in the cabinet. All of the pieces interlock well and there is no need for glue. Each section has slots for 4 bottles and a slot for small bags of spices. No supports are required for this print. I tried to make it as efficient as possible to reduce the amount of filament it takes to print each section. It only uses 177g of filament per section. Each slot is 52mm in diameter. If you would like to scale it for larger jars, you can use that as a point of reference.

Modular Spice Rack

vitaprint 3D

Hier biete ich den Ring aus der Trilogie "Herr der RInge" an. Das Modell ist vorbereitet für die MMU und AMS und kann also mit zwei verschiedenen farben gedruckt werden. Am schönsten ist es Gold für den Ring und Glow in the Dark für die schrift zu wählen.

Lord of the RIng MMU AMS

LotR

TheBear

&nbsp;Every party needs a little bit of noise - and especially New Year's Eve!&nbsp;Most of all already know the Party Horns you can buy at different stores around New Year's. But it has never been possible to 3D-print one at home - until now!Introducing the World's First 3D-Printable Functional Party Horn!&nbsp;After nearly 60 iterations and tests, I have finally succeeded with creating a Party Horn that actually produces sound which mimicks that of the store-bought ones, while also remaining easy to print!This means that no supports are needed, as I have carefully designed the interior to avoid briding as much as possible. The mouthpiece itself is print-in-place and ready-to-go!&nbsp;<h2>Assembly (10 seconds)</h2>While the mouthpiece itself doesn't require any assembly, you might need to free the vibrating pin, by sliding your finger across the top, if your retraction settings aren't 100% spot-on and a little bit of stringing has occured.Like so:<img src="https://makerworld.bblmw.com/makerworld/draft/320783/2023-12-07_a4ef5d282e6f3.gif">&nbsp;&nbsp;The cone is assembled by inserting the pins/pegs into the holes. Afterwards, you simply drop the mouthpiece down into the cone, line up the pegs with the holes, and pull it a bit, until the pegs pop out and the mouthpiece is secured.Like so: <img src="https://makerworld.bblmw.com/makerworld/draft/320783/2023-12-07_2321f35197db9.gif">Now you simply have to blow into the mouthpiece, and sound comes out - just like a regular party horn! If sound doesn't come out, or if it sounds a bit “wrong”, you can try holding the pin back for a few seconds to very slightly “bend” it a bit. &nbsp;<h2>Print settings / Tips&Tricks</h2>If you're not using a Bambu Lab printer, or if you decide not to use my Print Profiles, here are a few things, you need to know:<ul><li>A brim is highly recommended for the mouthpiece, as it is quite slim.</li><li>Use 0.4mm wall thickness (This is to ensure the pin is the right thickness).</li><li>For the “Cone, with Strands”, please use 3 walls at least - otherwise the first layer might not be quite right.</li><li>I highly recommend using Archimedean Chords as the Top Surface for the cones - this increases their strength significantly when bending, as no lines are 100% parallel to the bend.</li><li>Ensure your retraction settings are on-point! The pin is printed right in the middle, and it is absolutely crucial that it moves - otherwise no sound is generated when blowing into the horn!</li></ul>I have only tested the mouthpiece in PLA and PLA+.The cone has been tested in PLA, PLA+ and Silk PLA.&nbsp;&nbsp;&nbsp;&nbsp;And just for fun, a picture of the iterations and tests I went through (in no particular order):<img src="https://makerworld.bblmw.com/makerworld/draft/320783/2023-12-07_9ba113385634f.jpg">&nbsp;&nbsp;Remixing is currently not allowed, as I have quite a few designs for the cones, which I will be uploading gradually.I do allow you to add your own text on the cone in the slicer - you just cannot upload it as a remix currently.&nbsp;&nbsp;

Party Horns - Fully Printable! (New Year)

New Years

All Things STL

All Things STL is providing a Turkey for Thanksgiving!! You can “paint” the bird in your favorite slicer and it works great. Enjoy! No support needed!!

Turkey

Thanksgiving 

Ciuf_Ciuf

One of the worst and most stressful things about using AMS is the amount of purged filament that gets wasted, without considering the additional time for each print. So, I decided to create this simple file without having to make any modifications to the gcode or anything else.The goal, therefore, is to minimize the amount of filament during each purge. The only necessary tool is a caliper, but you can also use a simple ruler.&nbsp;You start by setting all the purges to 50mm³<figure class="image image_resized" style="width:37.92%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_4aedbe6bc42f2.png"></figure>&nbsp;Once you've chosen which filament to calibrate, through the slicer, you set the correct sequence of chosen colors. A simple example is the photo below.<figure class="image image_resized" style="width:38.77%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_47d1448e5d29e8.png"></figure>All that's left to do is start the print and wait.What you will see in front of you will be something like this.<figure class="image image_resized" style="width:35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_5c560b0fe3b9a8.jpg"></figure>At this point, our friend, the caliper or ruler (depending on how precise you want to be), comes into play. What you need to measure is the moment when the color you've chosen stops blending with the previous color and finally takes on its clean color.&nbsp;In this case, to transition from gray to blue, 48mm are needed.Now, using a simple formula, you can calculate the final value to input into the slicer. Each rectangle is exactly 100mm³. So, you need to multiply the measured value by 2 and add it to the 50mm³ set previously. Therefore:&nbsp;Vdef = (Vmeasured x 2) + 50 = (48 x 2) + 50 = 146&nbsp;Now, I will input 146mm³ to make the color change from gray to blue.&nbsp;This process should be performed for all color changes and all possible combinations. In case the first rectangle is not enough, the one below will complete the purge. Just keep in mind that in the formula, in addition to the 50, the value of the first rectangle, which is 100, should also be included.&nbsp;For example, as it happened to me for the change from black to gray, I measured the second rectangle, finding 13mm, and then I applied the formula again, adding the value of the first rectangle.&nbsp;<figure class="image image_resized" style="width:34.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_556a3a54f7ecd.jpg"></figure>So, the calculation would be:&nbsp;Vdef = (Vmeasured x 2) + 50 + 100 = (13 x 2) + 50 + 100 = 176&nbsp;Therefore, I would input 176mm³ to facilitate the color change from black to gray.&nbsp;Using this method allows you to significantly reduce the amount of purged filament without affecting the color you'll load afterward. In the photo below, you can see the amount of filament that has been purged using this technique.<figure class="image image_resized" style="width:34.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_e44854969175d8.jpg"></figure>&nbsp;Comparing it with the slicer's automatic calculation, the difference is quite evident. This technique allows you to reduce purging by 30% or even less, depending on how precise your measurements are.&nbsp;BEFORE<figure class="image image_resized" style="width:35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_aaffe4a2460af8.png"></figure>AFTER<figure class="image image_resized" style="width:35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_45cf9e0401d838.png"></figure>&nbsp;I hope this simple idea can help you, as it helped me, to reduce the amount of filament wasted during color changes.Wishing everyone happy printing and lots of fun!&nbsp;&nbsp;

AMS Purge Calibration

Utility

JamesThePrinter

** Get an early start! Get the <a target="_blank" href="https://makerworld.com/en/models/41177" rel="nofollow noopener">Christmas version</a> now! **&nbsp;&nbsp;Light up different Halloween scenes in this display. A tea light candle is required. The display features a door that opens to allow access to the tea light. Use a section of 1.75mm filament inside the hinge to connect the door to the case. Depending on your printer/setup, this hole may be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.I have included a separate liner. This allows you to print the case in a dark color, but line the inside with a lighter color to allow for more reflection of light outward, making everything brighter.For a complete display, you will need:<ul><li>1x Case</li><li>1x Door</li><li>1x Knob</li><li>1x Snap Ring</li><li>1x Liner - Optional</li><li>1x (minimum) Scene - You can easily remove the snap ring to swap out scenes as desired</li></ul>Check out my other holiday models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener">here</a>.<h4>Print Settings</h4>No special setting are needed for the display case, door, knob, snap ring and liner. &nbsp;Scenes Print SettingsPrint the scenes with 100% infill. The scenes also require color changes:<ul><li>The top 2 layers should be black</li><li>If there is no moon in the scene, all other layers can be white or clear - both look nice</li><li>If there is a moon in the scene, it will look best if the bottom 2 layers are printed in clear filament<ul><li>All other layers should be white</li><li>All non-black layers could be printed in all white or all clear if one isn't available to you</li></ul></li></ul>&nbsp;<h4>Assembly</h4>Glue the knob into the door. Only a very small amount is needed.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_njhnxlluv3as.png"></figure>Put the door in place and latch it. Use a 20mm piece of 1.75mm filament to connect the 3 sections of the hinge. If the filament goes in very easily, it may be a good idea to heat up the top end of the filament ‘pin’ and press it flat. This will prevent the pin from falling through later on.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_ps9jc73zrxio.png"></figure>Open the door. Insert a scene into the opening (image facing outward). Insert the snap ring behind the scene by gently squeezing and placing it into the groove (see red arrow below).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_zosx4sj7pb0v.png"></figure>If you are using a liner, slide it inside the case. This may be a tight fit. Go slowly and be sure to slide it in evenly on all sides.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_t3jeg8v9f9hv.png"></figure>Turn on your tea light and close the door.&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Ivory White PLA</li><li>GIANTARM Transparent Clear PLA</li></ul>

Halloween Tea Light Display

Halloween

Frikarte3D

NEW VERSION HERE: <a target="_blank" href="https://www.printables.com/model/643389-umbrella-corporation-tool-box-multicolor-and-multi" rel="nofollow noopener">Umbrella Corporation Tool Box V2</a> (Recommended)&nbsp;Umbrella Corporation is a fictional pharmaceutical company that secretly created bioweapons and zombies. The Umbrella logo is featured on the top of the box, which can be printed in different filaments to enhance its look.The base and the latches are the original parts from the Tool box parametric model. The box also contains two vials: one with the T-virus and one with the antidote. These vials are from the <a target="_blank" href="https://www.thingiverse.com/thing:1297430" rel="nofollow noopener">Vial (v2) de &#34;G-Virus&#34; y &#34;T-Virus&#34; (Resident Evil) (Actualizado)</a> model by <a target="_blank" href="https://www.thingiverse.com/Rammaukin" rel="nofollow noopener">Rammaukin</a>.This is a fun and spooky way to store your tools and show your love for Resident Evil!&nbsp;The Umbrella Corporation Box is compatible with all the <a target="_blank" href="https://makerworld.com/en/models/217203#profileId-236238" rel="nofollow noopener">Tool Box Bases with Compartments</a> models I designed, such as the ones with 2, 3, 4, 6, 9, 18 or 36 compartments. You can swap the base to create your own customized box with different sizes and layouts. It will also be compatible with the future bases that I will design.&nbsp;If you want to avoid items shifting between compartments during transit and also optimizes the available 5L space beneath the toolbox lid you can print my <a target="_blank" href="https://than.gs/c/13653?affiliateCode=Frikarte3d" rel="nofollow noopener">Tool Box Trays</a>.&nbsp;This is a REMIX and is protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without original designer explicit written consent.&nbsp;To sell them legally, message the designer.&nbsp;Hope you like it! Any advice, or recommendation is welcome! Happy Printing!&nbsp;I would be very grateful if you print it and put it on social networks to tag me at <a target="_blank" href="https://www.instagram.com/frikarte3d/" rel="nofollow noopener">@Frikarte3D</a>

Umbrella Corporation Tool Box V1

Resident Evil

cruse2382

prints face down and set to print in order you have colours loaded

the nightmare before Christmas scene bauble

Christmas

TuffMutt_3D

This is a kitchen drawer organizer I made for my new Holiday trailer. It holds all standard kitchen utensils as well as cooking, bbqing and baking accessories in the long tray as well as any other misc. items someone would like to keep in the same drawer (example corncob pegs). &nbsp;Currently it is scaled to fit in a 15.5" x 16.25" drawer but can be scaled and remixed how ever one see's fit. There are 2 different sizes of X-Pegs, the smaller 3.5mm pegs are for connecting the Long tray and the XL Misc. tray as seen in the pictures above. &nbsp;These do not require any supports to be printed but I do suggest printing with the 3 line brim I have input on the 3MF file to reduce warping as the print does take some time and the trays have a possibility of cooling too soon and releasing from the build plate. They are also made to perfectly fit on a P1P or X1C build plate aswell but if you have a bigger build surface feel free to set the parts as needed! I printed with Bambulabs Marble White PLA and printed the X-Pegs with Bambulabs Black ABS &nbsp;Feed back is always welcome so I can progress in future designs, Thank you!

Coasters

Arcade Game Scenes

Globes

Mother’s Day

Door Corner

Fallout

Bathroom

Suspended

fnaf

Shadowboxes

cosplay

nerf

Easter

Games

Neon Signs

Legos

Easter

gun

Lamps

Ghostbusters

Star Trek

Star Wars

Janet

Granddaughters

Wall Art

Valentines

Print ASAP

Wall Decorations

Kitchen

Game Inserts

Chess

Kitchen

LotR

New Years

Thanksgiving

Utility

Halloween

Resident Evil

Christmas

To Print