Earlstein

dkantz5

Dragon skull hair pin by <a target="_blank" href="https://www.thingiverse.com/AngryAnteater" rel="nofollow noopener">AngryAnteater</a> on thingiverse Sliced for A1

Dragon Skull Hair Pin

Halloween 

Swallala

My 3D version of the magic box made by mr.fuzail_art: <a target="_blank" href="https://www.instagram.com/reel/C1lukxZpua4/?igsh=MXEyamhrdTJuOG1zaA%3D%3D" rel="nofollow noopener">AMAZING MAGIC BOX</a>No glue is needed to assemble it: just insert the cover pins into the corresponding holes, AFTER inserting the hidden pencil piecesThank you mr.fuzail_art!

Magic pencil box

C Stuff

Morris

A trash can bin for your car that&#39;s soft and flexible if you print it with ordinary PLA!This is make sure you don&#39;t hurt your self getting in and out of the car and it&#39;s light weight with rounded corners - meaning if you have an accident it&#39;s most likely not to hurt you or your passengers.&nbsp;You can either attach it directly with velcro or double sided tape but i recommend you print and use the fastners.Attach the hook to the trash bin as seen in the pictures and the holder to any surfare - you can then easily remove and empty the bin.

*Flexible & Safe* Car Trash Bin 

3Dennis

Appreciate the design? Consider supporting my work by <a target="_blank" href="https://makerworld.com/en/u/3694296089" rel="nofollow noopener">following my account</a> :) [Description by original designer]&nbsp;It's a big skeleton that is (for legal purposes) inspired by a Lego skeleton. If you want to know more about this project or see more pictures, check out my <a target="_blank" href="https://docs.juliaebert.com/projects/lego-skeleton/" rel="nofollow noopener">project documentation page</a>.This is also <a target="_blank" href="https://www.thingiverse.com/thing:5019502" rel="nofollow noopener">available on Thingiverse</a>.I was unsatisfied with existing Lego skeleton models online. There was a <a target="_blank" href="https://www.thingiverse.com/thing:3536767" rel="nofollow noopener">model on Thingiverse</a>, but it had a very low resolution STL (circles had 16 sides, for example), and it was originally designed for a 1:1 model. I found a couple of great models on GradCAD from Yauhen - <a target="_blank" href="https://grabcad.com/library/lego-skeleton-minifig-fantasy-era-1" rel="nofollow noopener">Lego Skeleton Minifig Fantasy Era</a> and <a target="_blank" href="https://grabcad.com/library/classic-lego-skeleton-1" rel="nofollow noopener">Classic Lego Skeleton</a>. These included the STEP and SLDPART files, so I could easily modify them and export with high enough resolution for printing.Lego minifigures are designed for injection molding, not 3D printing, so it's tricky to figure out how to break up the model to minimize the amount of support (and in turn, improve the surface finish of the parts). That's why there are so many parts to this print. I also tried to make sure parts could be printed in their strongest print orientation. Lastly, I had to adjust the tolerances of parts to make them snap together as big 3D printed pieces. I spent a lot of time prototyping this model, so I hope it works for you as well!This is designed to be printed at the size of the given STL files: 10x larger than a Lego minifigure. If you scale it up or down, I can't guarantee how the tolerances will hold up. If people are interested in other sizes, I can test the tolerances (and adjust the pin sizes) and make that available.If you want to make any changes of your own (including rescaling), <a target="_blank" href="https://cad.onshape.com/documents/0244ea1dd3a12456399aaaef/w/e0d1c4a865a9519d549edefe/e/475ea9aed0e3ba36a32a9902?renderMode=0&uiState=6172dec4a070904d88332843" rel="nofollow noopener">here are the design files in OnShape</a>. You will need an OnShape account, but there is a free hobby tier available.January 2022 update: There are now additional files that split up the torso into multiple pieces (with more pins!) so that it will fit on smaller printers like the Prusa Mini at 100% scale. See more below in the “Printing Notes” section. New files are in the “Split torso” folder.Printing NotesIf you're print using the 3MF files (recommended), you will need to print: (All supports are already configured here)<ul><li>2x arm.3mf</li><li>2x leg.3mf</li><li>2x body-torso-half.3mf</li><li>1x body-neck-4x-pelvis-shoulder.3mf</li><li>1x connector-pins.3mf</li><li>MMU head:<ul><li>1x head-mmu.3mf</li></ul></li><li>Head as separate pieces:<ul><li>1x head-skull-separate.3mf</li><li>1x head-face-separate.3mf</li></ul></li></ul>If you're printing directly with the STLs, you will need to print: (No supports required, except where noted)<ul><li>2x arm-upper-arm.stl</li><li>2x arm-lower-arm.stl</li><li>2x arm-hand.stl</li><li>2x leg-foot.stl (requires bed-only support)</li><li>2x leg-calf.stl</li><li>2x leg-thigh.stl</li><li>2x body-torso-half.stl</li><li>4x body-pelvis-shoulder.stl</li><li>1x body-neck.stl</li><li>50x connector-pin.stl</li><li>If you are printing the skull and face together with an MMU (or similar):<ul><li>1x head-skull-mmu.stl</li><li>1x head-face-mmu.stl</li></ul></li><li>If you are printing the skull and face separately (or not printing the face inset):<ul><li>1x head-skull-top-separate.stl (requires support everywhere)</li><li>1x head-skull-bottom-separate.stl (requires bed-only support)</li><li>1x head-right-eye-separate.stl (optional, requires bed-only support)</li><li>1x head-left-eye-separate.stl (optional, requires bed-only support)</li><li>1x head-nose-separate.stl (optional, requires bed-only support)</li><li>1x head-mouth-separate.stl (optional, requires bed-only support)</li></ul></li></ul>If you're printing on a smaller printer that can't fit the whole torso (this includes the Prusa Mini), there's an alternative version that splits the torso into two parts, connected by an additional 4 pins. Instead of printing body-torso-half.stl, print the files found in the “Split torso” folder below:<ul><li>2x body-torso-half-upper.stl</li><li>2x body-torso-half-lower.stl</li><li>4x connector-pin.stl (found in the main “STLs” folder)</li></ul>The biggest purpose of the pins is to align parts when you glue them together. For this to work, the pins need to press fit into their respective holes. Before printing all the pins, check that they press fit! If not, scale the width and height up or down as needed to fit the holes. Don't scale the length, or your pieces might not sit flush together.I recommend printing on a smooth bed. This will make for better seams when gluing together the body and arms.This is not a functional, structural part, so you can't get away with sparse print settings to save time and filament. I printed mine in PLA with 7% infill, 2 perimeters, and 0.2 mm layer height. The filament I used was scavenged from a dumpster.Assembly NotesIn general, there's only one way for pieces to fit together, so it should be fairly intuitive how to construct it. However, here's how all of the pins and pieces fit together, in CAD form: (Note that the pelvis and shoulder pieces on the body are identical/interchangeable.)<figure class="image image_resized" style="width:714.016px;"><img src="https://docs.juliaebert.com/assets/img/projects/lego-skeleton/assembled-skeleton-model.png" alt="Skeleton CAD with pins"></figure><ul><li>Here's my suggested assembly procedure:<ul><li>Start by test fitting together the parts with no glue, to check for any misalignment or loose/tight pins.</li><li>Glue all of the pins into one of the pieces you're fitting together.</li><li>Put super glue on the mating surface of the other part. No need to put it in the pin holes; the pins are for alignment, not strength, and if you put glue in them here, it can cure before you get the pieces fully together.</li><li>Line up the parts using the pins and carefully push the parts together. The thin layer of glue will cure very quickly, so there often isn't time for realignment!</li></ul></li><li>I recommend liquid super glue (as opposed to gel). When the pieces get very close together, capillary action will pull the glue to cover a larger area, and you'll get a better connection between the parts.</li><li>Assemble the legs first. These are the most forgiving parts (less precise alignment required to look good), so they're best for getting the hang of things.</li><li>The arms and legs are designed to snap onto the shoulder and hip pegs. Before attaching the shoulder and hip pegs to the body, check that you can snap on the arms and legs.<ul><li>If the arms/legs are too tight to snap on: Either (1) file/sand down the inside of the sockets until they fit on, or (2) slide the ams/legs on from the end of the pegs, then glue the pegs onto the body. The second option is easier, but make sure you don't use too much glue, or the arms/legs could end up glued in place instead of rotating freely. Also note that this option means you won't be able to take the arms and legs off.</li><li>If the arms/legs are too loose to hold their position: Add something to line the inside of the arm/leg sockets, like tape. This extra thickness should help hold them in place.</li></ul></li></ul>Model NotesAs mentioned above, this is based on GrabCAD models from Yauhen - <a target="_blank" href="https://grabcad.com/library/lego-skeleton-minifig-fantasy-era-1" rel="nofollow noopener">Lego Skeleton Minifig Fantasy Era</a> and <a target="_blank" href="https://grabcad.com/library/classic-lego-skeleton-1" rel="nofollow noopener">Classic Lego Skeleton</a> - and modified and shared here with their permission.In case you're curious about the corresponding Lego parts they're inspired by:<ul><li>Skull: #82359</li><li>Body: #60115</li><li>Leg: #6266</li><li>Arm: #59230 and #30377 (It's an amalgamation of these parts, not a part that actually exists; I took artistic license here to make something that looks nicer and is more functional.)</li></ul>To adjust the tolerances to make parts fit together, I always only adjusted the size of the outer piece. That means studs and pegs always retained their original size (48 mm for studs, 32 mm for pegs). So if you want to print any accessories for your skeleton (like a base, a hat, or something for it to hold), you can you these dimensions.

Mega Lego-like Skeleton (10:1 scale)

K stuff

shawn.mek

My son requested some wolverine claws, and since I had just printed a print in place spring box I was like ‘I bet we could make some claws spring loaded!’&nbsp;Famous last words…&nbsp;Fortunately (or unfortunately?) the spring idea proof of concept worked immediately:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-13_5780d7bc20069.gif">&nbsp;So we were off! And then a billion iterations later, we get to this first release version.&nbsp;It's a bit tricky to assemble, but I'll try to get some how to's in the future if needed. Please leave feedback on what I might do to enhance it - or let me know points of failure that I can strengthen.&nbsp;Thanks!&nbsp;For Assembly, you may want to watch this youtube where Uncle Jessy successfully assembles it (<a target="_blank" href="https://youtu.be/PM3DsiuDIDw?si=Ku4l55NfCI200hou" rel="nofollow noopener">https://youtu.be/PM3DsiuDIDw?si=Ku4l55NfCI200hou</a>). &nbsp;HAND STRAP - This was for my son, and I actually tried using the Polycam photogrammetry app on my phone to 3D scan his hand, and then made the strap using that :). It worked suprisingly well for HIS hand. I scaled up the strap for bigger hands, but you can also cut or delete a piece to make it bend and fit different sizes.&nbsp;&nbsp;ASSEMBLY&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_a7a31b9c9d4a4.jpg">&nbsp;The brake.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_2e8e8b3f94888.jpg">Stick the ‘trigger’ down through the brake sideways and then turn it (somewhat gently, don't break :))<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_034ac41c92e4e.jpg">&nbsp;Put the springs into the brake<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_23fc35f069994.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0a283aa1fd7bc.jpg">&nbsp;TRICKY PART -No to putting the brake on this way (it won't have enough space to release):<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_ecf791bfd8bc5.jpg">Put it on the other side (I've never had to glue, but tolerances may necessitate that - the mechanism itself actually holds it together pretty well regardless), and then stretch/pull it over to the front (the springs will now have arm length and springiness for the brake mechanism):<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_d14067333d86c.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_1106349f4ddcc.jpg">Now put the claws through while holding the brake out of the way. Depending on tolerances you may need to move the claws in and out of the guides to break it in:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_1479d7245892c.jpg">Snap the springs into claws and top plate, and then top plate into bottom plate:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0c259e60d24bd.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_a30a3d439e271.jpg">Pull down brake and pull out claws, slip strap around extended claw spring and onto the assembly:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_d40f2a0eb72e9.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0233270d2b7b3.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_aebe1855448f5.jpg">&nbsp;&nbsp;

Wolverine Claws - Retractable, Spring-loaded, Trigger (No extra non printed parts needed)

If I were a nerd...

Lars 🙂

Plant Swing!A funny cute plant pot sitting on a swing. Give your pot different hair styles by choosing your plant. I’ve included a attachment so the swing can be attached under a shelf, window frame or on the ceiling. If there is interest for a attachment the can be hung from the wall I will make one!&nbsp;Please leave a like, feedback and don’t forget to upload your makes! If you’ve got any trouble don’t hesitate to contact me.&nbsp;Materials needed<ul><li>1 piece of rope. ~3mm diameter.</li><li>PLA</li><li>Plant</li><li>Glue</li><li>(2 screws) if you want to hang it up underneath a shelf or window frame. </li></ul>&nbsp;Assembly:<ul><li>Glue the arms and legs in place. (arms should be vertical up, for the rope.)</li><li>Glue the shoes on the legs.</li><li>Cut 1 piece of rope at the desired length. (2x the length between the attachment and actual height you want the swing to be hanging.</li><li>Insert the rope through the holes in the swing from the top side down. </li><li>Tie a knot on both ends of the rope to keep the seat in place.</li><li>Press the rope in the hands of the pot. </li><li>Attach the attachment to the desired place and screw it down.</li></ul>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/817277/2024-04-05_ab058c6f1ef1e.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/817277/2024-04-05_c05c4ebe9d9a7.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/817277/2024-04-05_6eb7980bdcde8.jpeg">

Plantpot on a swing!

Plants

hollowmaker

Just a brick-cactus I made for my son.  I recommend tree supports from the buildplate only.&nbsp;Discover more of my work by exploring my other designs! Thank you! :-)<a target="_blank" href="https://makerworld.com/en/models/488866#profileId-401919" rel="nofollow noopener"><img class="image_resized" style="width: 64.8%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000429797/design/2024-06-09_4e1f63fc0c09b.gif"></a><a target="_blank" href="https://makerworld.com/en/@hollowmaker" rel="nofollow noopener"><img class="image_resized" style="width: 65.05%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000429797/design/2024-06-01_e76a139217ed3.jpg"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/u/1369155071" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000429797/design/2024-02-06_6f2bcfd28bb12.jpeg"></a>&nbsp;Also check out my other Legos-compatible designs I have made:<a target="_blank" href="https://makerworld.com/en/u/1369155071" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000429797/design/2023-12-30_fa85a898e0a39.webp"></a>Follow me to stay updated and never miss out on my latest exciting creations! Thank you :)

Brick Cactus

H Stuff

BODY MECHANIC

harry potter wand (miriam)

A Stuff

Victor

Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:<a target="_blank" href="https://www.printables.com/model/280190-thickness-reference-rules-wall-layer-05-to-5mm" rel="nofollow noopener">https://www.printables.com/model/280190-thickness-reference-rules-wall-layer-05-to-5mm</a>&nbsp;Thank you for printing my model!If you&#39;d like you can buy me a coffee here: <a target="_blank" href="https://www.buymeacoffee.com/vitim" rel="nofollow noopener">https://www.buymeacoffee.com/vitim</a>

Fillet Radius Finder Design Reference Ruler 1-12mm

Tools

Rocco's Stuff

<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=6kw6jralxXA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/6kw6jralxXA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>This design uses a mix of 3D printed parts, various lengths of 5mm dowels and a few springs. Everything can be printed without support material (in PETG and PLA, at least) but brims may be required for some parts. Below is a list of all the non-printable parts:<ul><li>5mm Metal Dowels - These can be purchased on Amazon or other websites in either kits with multiple sizes or packets of specific sizes. For this project you need:<ul><li>Required<ul><li>(1) 10mm x 5mm</li><li>(2) 12mm x 5mm</li><li>(5) 16mm x 5mm</li><li>(1) 20mm x 5mm</li><li>(4) 30mm x 5mm</li><li>(3) 35mm x 5mm</li></ul></li><li>Handle (Required, but size can vary)<ul><li>(5) dowels required, 20mm x 5mm min, 35mm x 5mm max</li></ul></li><li>How to get dowels? Search “5mm metal dowels” on Amazon, or other wholesalers, and there are many options. You can buy kits with a variety of size, but I have not found a kit with every size needed for this project. The most efficient way that I know is to purchase the 2 items below:<ul><li>Hilitchi 110 Pcs Kit:<ul><li><a target="_blank" href="https://www.amazon.com/gp/product/B07F3T5FKL/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B07F3T5FKL/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1</a></li></ul></li><li>12mm x 5mm dowels:<ul><li><a target="_blank" href="https://www.amazon.com/dp/B0BFRRQJZ7?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B0BFRRQJZ7?ref=ppx_yo2ov_dt_b_product_details&th=1</a></li></ul></li></ul></li></ul></li><li>Springs<ul><li>I used ‘METALLIXITY’ springs. This is the product page:<ul><li><a target="_blank" href="https://www.amazon.com/dp/B0B6J295FG?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B0B6J295FG?ref=ppx_yo2ov_dt_b_product_details&th=1</a></li></ul></li><li>According to Amazon, the mechanical properties of the springs are:<ul><li>Outer Diameter: 4mm/0.16"; Wire Diameter: 0.3mm/0.01"; Free Height: 20mm/0.79"; Compressed Length: 12mm/0.47"; Load Capacity: 2N; Spring Rate: 0.25 N/mm</li></ul></li><li>I'm sure other springs would work, but I tested a few different types and most were a bit too strong, making it difficult to insert the key.</li></ul></li><li>Refer to diagrams below for size and locations of dowels<img src="https://makerworld.bblmw.com/makerworld/draft/779316/2024-03-27_b3ed4f72198f1.png"><img src="https://makerworld.bblmw.com/makerworld/draft/779316/2024-03-27_14b11cda9b1d5.png"><img src="https://makerworld.bblmw.com/makerworld/draft/779316/2024-03-27_b1cfdd1668ff3.png"></li></ul>

3D Printed Vault with Pin Tumbler Lock

Projects

tmayowski

<div><h1>Summary</h1><div>Desk Organizer for under my monitor shelf.Has 4 usb storage spots, 3 SD card slots, one 3x3 post it note storage.To cut down on printing time you can print at a higher layer height or a wider line width.</div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender 3</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0.28</div> <pre><code> Infill: <div>10%</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=Eryone+PLA%2B" target="_blank" rel="nofollow noopener"> Eryone PLA+ </a><pre><code> Black Notes: <div>Any material does the trick.</div></code></pre></div>

Desk Organizer (under Shelf)

Organize

喵武士

I used to think that it was impossible to print a usable normal-sized click pen structure through a 3D printer. Bambu printer with a 0.2mm nozzle, and its accuracy is indeed a bit surprising to me.&nbsp;我曾经觉得使用3D打印机实现一个正常大小的按压式圆珠笔的结构，这是不可能的。拓竹配0.2mm的喷嘴，这个精度确实有点让我惊讶!&nbsp;&nbsp;As a 3D printing enthusiast, it&#39;s cool to have a nice 3D printed ballpen. This is a pure 3D printed retractable ballpen, with a lovely rounded shape.&nbsp;The printing accuracy is key to the mechanism of the click pen. So it should use a 0.2mm nozzle, and with 0.1mm Layer height. Two plates are suggested for better quality.&nbsp;It uses Uniball UMR-85N / UMR-83N as refill. and it only need a common (0.4*5*21) spring for ball pen.&nbsp;按压式圆珠笔的机械结构，曾使我非常着迷。作为一个3D打印的爱好者，如果有一只这样的3D打印圆珠笔，应该是一件很酷的事。&nbsp;这支笔有着圆滚滚，胖墩墩的可爱外形，长度只有12厘米，比普通的圆珠笔还短将近3厘米，携带也很方便。&nbsp;打印精度是按压式圆珠笔能否丝滑的关键，所以这里要使用0.2mm的喷嘴，层高设置为0.1mm。建议零件和外壳分别使用两块板布局以提高质量。&nbsp;笔芯使用三菱Uniball UMR-85N/UMR-83N。只需要一个0.4*5*21的圆珠笔弹簧。&nbsp;&nbsp;To make it more special, with Bambu studio text shape function, you can easily customize your name or any text to be engraved on your pen. It can be printed well using a 0.2mm nozzle.&nbsp;为了让这支笔更加特别，使用拓竹切片软件的文字功能，你可以很方便的在笔夹或笔身上定制文字，例如你的名字或送给朋友的祝福短语。使用0.2mm的喷头，可以很好地打印出这些细节。&nbsp;<img class="image_resized" style="width: 100%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437435/design/2024-05-10_06fadbcfe9b.jpg">&nbsp;&nbsp;<img class="image_resized" style="width: 49.1%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437435/design/2024-05-10_d575df089e165.png"><img class="image_resized" style="width: 49.75%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437435/design/2024-05-10_f748b01859525.png">&nbsp;<img class="image_resized" style="width: 49.24%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437435/design/2024-05-10_4f9946db4871d.png"><img class="image_resized" style="width: 49.45%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437435/design/2024-05-10_6fb63daecf2e2.png">&nbsp;<img class="image_resized" style="width: 49.28%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437435/design/2024-05-10_82c61d45d2ec7.png"><img class="image_resized" style="width: 49.2%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437435/design/2024-05-10_e571281002fcc.png">&nbsp;Assemble details in English, pls refer to:  https://youtu.be/bVQpvxSBjMw&nbsp;<figure class="media"><oembed url="https://www.bilibili.com/video/BV1Hw4m1U7pg/?vd_source=702a082a87a60dd32752c0347b4efee5"></oembed></figure><figure class="media"><oembed url="https://www.bilibili.com/video/BV1xs421N7dL/?vd_source=702a082a87a60dd32752c0347b4efee5"></oembed></figure>