EQTitan

mail.iou

The decoration above the door adds to the Christmas atmosphere.This requires 2 colors or more of filament, you can mix and match your own colors.&nbsp;Profile1: Predefined black and white filaments.Profile2: Predefined filaments of 4 colors: black, white, red and green.

Door Corner - Christmas

Christmas 🎁

CADScott

If you like this model and find it useful, you can support me in creating more by clicking on the Boost button above.&nbsp;NOTE: I have uploaded STEP files of all models. To access them  you just have to click on “Download or Print”, and then the REALLY badly labelled &#34;Download STL&#34; and it will show the raw model files, which are all STEP.&nbsp;This handy tool attaches to the outside of motorcycle chain oil cans, and enables you easily oil the chain with one hand. It splits the oil path from the outlet tube into two and places the oil over the rings where it is supposed to go.&nbsp;This massively reduces the mess and makes sure that the oil is placed in the correct location rather than being sprayed everywhere.I have tested this design with both the largest and smallest diameter can that I could find and it works fine with both.&nbsp;Simply tape the block onto the can with some strong tape and ensure that the outlet tube feeds into the block with no kinks.&nbsp;There is a version available for each of the most popular chain sizes 520, 525 and 530, with the number on the top side for easy identification.&nbsp;This could be printed with any filament, I have used both PLA and PETG and either works fine.

Motorcycle Chain Oiler Block - 520, 525 & 530 Size

Motorcycle 

crabstiks

Hellraiser box of lament movie prop.&nbsp;The box measures 55mm on each side (about 2.16 ") the same size as a standard rubics cube. There's also now an upscaled by 150% version, this needs to print on 2 plates. Many thanks to Nick C for the suggestion and for doing the test print. &nbsp;There are 2 print profiles of this model, one without a pause, one with a pause to add 1X 8mm diameter by 10mm deep magnet. There is space for 2 magnets but please only add one as the weight of the second magnet can make it a tad heavy to stick properly.&nbsp;The model is made so it clicks together this can mean when it's a fresh print it can feel a little stiff at first.&nbsp;I do recomend using a little ca glue when assembing the four side faces, the panels do clip on but the glue will hold it together much better. It's a good ides the lay the faces out one at a time and checking the orientation before gluing.

Christmas 🎁

Motorcycle

Movie Props