ECW3D

IK3Digital

I was sick of having all my filaments spool around and my printers room is pretty small so I decided to design this bracket so I can store them up in a corner.It works great with 1kg spools but if you want to use bigger ones let me know and the diameter of them.They look tidy and it's easy to choose the color you need to finish your project.I used the skinny versions and as I only use this for almost empty spools I used about 10-15% infill.I printed them in Prusa Orange to match my MK3 printers :)&nbsp;-To be used with 18mm (They are about 17.9mm) square timber sticks, the holes are 18x18mm.-Two versions, I used the skinny ones and printed in PETG.

Wall Spool Rack Space Saver

misc 

LordBoos

Night Dragon filament painting created in HueForge.&nbsp;To celebrate 200 downloads of this model, I recreated this model as a special edition in a form of Lithophane. It still looks good without backlight, but it really pops out when you backlight it! You can get it here: <a target="_blank" href="https://makerworld.com/en/models/34442#profileId-31663" rel="nofollow noopener">Night Dragon (Lithophane) - HueForge</a><h4>Printing instructions:</h4>Filament swaps ONLY, no MMU or AMS required, but AMS makes it much easier.Use Original HueForge profile to get the intended look, my models are very sensitive to print settings because of color blending between layers. Every setting and filament changes for AMS are carefully prepared and fine-tuned in the Original HueForge print profile, feel free to change colors, but I recommend not to adjust other settings. If you want to experiment with your own settings or non-original print profiles, for best look print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou can use same filaments as I did, or you can experiment with your own.Don't forget to upload a make!<h4>Filaments Used:</h4><ul><li>PLA BambuLab Basic Black Transmission Distance: 0.3</li><li>PLA Aurapol Blue Transmission Distance: 6</li><li>PLA R3D Light Blue Transmission Distance: 3.5</li><li>PLA BambuLab Basic Jade White Transmission Distance: 12</li></ul><h4>Swap Instructions:</h4><ul><li>Start with Black</li><li>At layer #7 (0.64mm) swap to Blue</li><li>At layer #13 (1.12mm) swap to Light Blue</li><li>At layer #18 (1.52mm) swap to Jade White for the rest.</li></ul>

Night Dragon (Filament Painting) - HueForge

hue forge

BT3D printing

World of warcraft logo wall art made with Hueforge. 3mf is precolored, for manual color change use:0.4 nozzle 0.08 layer height 0.16 first layer height 100% infill Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #9 (0.8mm) swap to Orange At layer #16 (1.36mm) swap to Pure Yellow for the rest.

misc

hue forge

signs