EAther3D

dekopuma

<p>Designed for TPU or other flexible filament! The topper grips the top of a can of soda to help seal it off. Convenient tab makes it easy to remove.<br>Cross section view showing how the soda saver grips the rim of the can:<br><img src="https://makerworld.bblmw.com/makerworld/draft/295621/2023-12-21_bf53e42f7dcd88.jpg"></p>

TPU Soda Saver 

summer

Cloudy Nostalgia

<p><strong><u>How to support me!</u></strong></p><p>If you like my work, consider joining my Patreon where you can have a say in what I print next! Only Patreon members get to see those items and you can even sell them at a certain tier. Finally, if you’d like to learn my tips and tricks for making a hueforge start to finish I offer a coaching session to some of my patreons! Thank you for all your support!</p><p>patreon.com/CloudyNostalgia</p><p>&nbsp;</p><p>Also, if you have any questions about how to print a piece of mine or if you need help troubleshooting, feel free to join my discord server where you can ask for help!</p><p><a target="_blank" href="https://discord.gg/4ays78UJ" rel="nofollow noopener">https://discord.gg/4ays78UJ</a></p><p>&nbsp;</p><p>Also, I upload videos every so often showing how to videos for Hueforge. If you’d like to view here is the link:</p><p><a target="_blank" href="https://www.youtube.com/channel/UCG1IDrymVjUyYng7nXrdGnw" rel="nofollow noopener">https://www.youtube.com/channel/UCG1IDrymVjUyYng7nXrdGnw</a></p><p>&nbsp;</p><p>**IMPORTANT INFORMATION**</p><ul><li>You cannot adjust the z scaling on any hueforge. This will mess with the coloring done and your hueforge will not come out as intended. You can however change the x and y to scale the picture. I recommend only changing by the same percentage.</li><li>To get an accurate print as shown in the photos you MUST use the same filaments listed below. You can change brands (as long as they are similar) but keep the filament colors the same. If you use any other color, you will not get the same results as me.</li><li>What you see in the slicer will not be how the final results will look! Hueforge takes advantage of color bleed to make the blended colors!</li></ul><p>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</p><p>Filaments Used:<br>PLA BambuLab Basic Black Transmission Distance: 0.6<br>PLA BambuLab Basic Red Transmission Distance: 4<br>PLA BambuLab Basic Cyan Transmission Distance: 4.8<br>PLA BambuLab Basic Gold Transmission Distance: 2.3<br>PLA BambuLab Basic Jade White Transmission Distance: 3</p><p>Swap Instructions:<br>Start with Black<br>At layer #15 (1.28mm) swap to Red<br>At layer #23 (1.92mm) swap to Cyan<br>At layer #29 (2.4mm) swap to Gold<br>At layer #32 (2.64mm) swap to Jade White for the rest.<br> </p><p>&nbsp;</p><p>**How to print more than 4 colors hueforge**</p><figure class="media"><div data-oembed-url="https://youtu.be/eDFzOYNW00w"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/eDFzOYNW00w" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><ul><li>Because a hueforge is essentially laying different colors on top of each other it is possible to print more than 4 colors in a hueforge. In a nutshell we take advantage of the filament run out sensor to pause the print for us and then allows us to change any other filaments at the same time.</li><li>The example below is for a 5-color print but carry on the same idea if you need more.<ul><li>Load AMS slots A1, A2, and A3 with the first 3 colors used. Leave the 4th slot unloaded.</li><li>Send to print. When asked which AMS slots have which colors assign the first 3 colors on A1 – A3 and the fourth color in the print to A4 (keep in mind it will not show a loaded color because it isn’t loaded). The fifth color will be assigned to A1 (I like to keep it sequentially but any other slot besides A4 will do)</li></ul></li></ul><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439973/design/2024-04-22_f5efc96d23585.png" alt="A screenshot of a computerDescription automatically generated"></p><ul><li>The printer will give a warning that some of the assigned colors are not mapped in the AMS just click confirm.</li></ul><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439973/design/2024-04-22_f15ee5e1da82d.png" alt="A screenshot of a computer screenDescription automatically generated"></p><ul><li>The printer will start printing and print automatically until it reaches the 4th color. It will tell you the filament ran out and you need to replace it. At this point I would load my 4th color AND my 5th color into the AMS A1 slot like I assigned it.</li><li>Continue the print and that’s it! You can repeat this as many times as you need but just doing this once allows you to print 7 colors with just one swap.</li></ul><p>&nbsp;</p>

Hueforge - Fallout - Nuka Cola Poster

lst_lab

<p>The <strong>Ancient Column Flower Pot</strong> is a beautifully crafted 3D model that combines the elegance of an ancient column with the practicality of a flower pot. This unique design features intricate details reminiscent of classical architecture, making it a perfect addition to any garden or indoor space.</p><p><strong>Key Features:</strong></p><ul><li><strong>Ancient column-inspired design</strong>: The column shape adds a touch of history and sophistication.</li><li><strong>Functional flower pot</strong>: The bottom of the column has carefully designed drainage holes to allow water to escape, ensuring healthy plant growth.</li><li><strong>Versatile use</strong>: Use it as a decorative piece on your patio, balcony, or even indoors.</li></ul><p>Whether you’re a 3D printing enthusiast or a gardening lover, the <strong>Ancient Column Flower Pot</strong> is a must-have for adding a touch of timeless beauty to your space. 🚀🔧</p>

Ancient Column Flower Vase 

garden/ outdoor decorations

Navibp3d

<p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">hueforge illustration for green bay packers fans</span></p>

Green Bay Packers Hueforge

Randy

radutzan

<p>It's a pretty good problem to have: your Peak glass collection is growing, and you need to make sure they stay upright. Sure, Puffco sells a glass stand, but you have a 3D printer.</p><p>Carefully designed to snap onto the base of your glass and stay centered with a little nub that meets the air intake, this compact but sturdy stand will move the center of gravity on your piece to a place that ensures peace of mind.</p><h3>Notes</h3><p>All glass is different, so fit will vary. I printed mine in PLA with supports, and have found that they can get wider after being on a piece for a few days. I'd recommend printing using PETG, or something else that retains the original shape better. TPU won’t be stable enough.</p>

Puffco Peak Glass Stand

brandonzgadzaj

<p>Wall mount or just set inside a cabinet </p><p>fits most Yeti and Stanley lids even all the Knock off/Clones out there</p><p>&nbsp;</p>

Yeti/Stanley Lid Holders (Mountable)

Home Items/Tools

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3><span style="color: hsl(0,0%,100%)">Introduction</span></h3></td></tr><tr><td><p>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed:<br>So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..</p><p>That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.</p><p>As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.</p><p>&nbsp;</p><p>Thanks,<br><strong>Ben Levi</strong></p><p><a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)</p><p>&nbsp;</p></td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2><p>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).</p><ul><li>Easy installation</li><li>Dual LED strip<br>installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td><p>&nbsp;</p><figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2><p>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:</p><figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><p style="text-align: center"><strong>Printing Time</strong></p></td><td>70~85 print hours - including color switching!</td></tr><tr><td><p style="text-align: center"><strong>Printer</strong></p></td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td><p style="text-align: center"><strong>Filament</strong></p></td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul><p>* Feel free to choose your own colors.</p></td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure><p>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. <strong>Click on the pictures to enlarge.</strong></p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><h2>Printing settings</h2><p>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.</p><p>Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results <strong>(click to enlarge):</strong></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure><p>Please note that you will find in also wonderful print profiles from the community too :)</p><h2> </h2><h2>Assembly instructions</h2><p>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:</p><h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3><p>Please print x2 Button insert.stl files and assemble as the photo below:</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg"></p><p>&nbsp;</p><h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project.<br>please make sure to choose: “white” and “Strip-USB Button” options.<br> </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files:<br><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2><span style="color: hsl(0,0%,100%)">Changelog</span></h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items<br> </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

work

steve_82

<p>A highly detailed ornamental skull.</p><p>&nbsp;</p><p>Enjoy!</p>

High details sugar skull

COOL!

RexVagabond

<p>Funnel for wide mouth mouth jars. Has an inner funnel to keep the lip of the jar itself clean. I printed mine with the funnel mouth on the build plate, but it should work either way. I can make the funnel mouth any shape / size you want, just ask. The threads may be different depending on the brand of jar you have. Mason jars evidently don't use standard machining threads, so these are custom designed.</p>

Wide Mouth Mason Jar Funnel

cooking

Toprototyp

<p>The model is designed to be printed in place without any supports.</p><p>&nbsp;</p><p>Tips for printing this model:<br>- orientation: all uploaded files are in the correct orientation,<br>- scale: do not scale the model,<br>- temperatures: depending on the material used and the manufacturer's guidelines,<br>- layer height: 0.2mm or less,<br>- number of outlines: 2 or more,<br>- infill: 15% or greater,<br>- brim: not required,<br>- supports: not required,</p>

TRASH CAN WITH SWING LID

Kendra

mcgybeer

<p>Cute Mini Octopus, the original!</p><p><strong>It's designed so it can be printed at once. No assembly or supports required</strong>.</p><p>Spare tentacle available as well, no need to discard failed prints!</p>

Cute Mini Octopus

Jenn

Kutnohormac

<div><h1>Summary</h1><div><p>A beautiful minimalist painting of a Mushroom cloud on the wall or with a stand on the table.</p><p>Size 185 x 200 mm</p><p>You can find the small print stand for the table on my profile</p><p>If you have any idea about the theme of decoration, contact me in messages.</p><p>Check out my other creations and don't forget to follow me so you don't miss any news.</p><p>You can support me by buying my premium print ↓<br><a href="https://www.printables.com/model/752199-ocelot-voronoi-wall-decoration" rel="nofollow">https://www.printables.com/model/752199-ocelot-voronoi-wall-decoration</a></p></div><h1>Print Settings</h1><p class="detail-setting printer brand"><strong>Printer Brand: </strong>                         </p><div><p>Creality</p></div>                                    <pre><code>                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender-3 S1 Pro</p></div></code></pre><p></p>                                    <p class="detail-setting rafts"><strong>Rafts: </strong>                         </p><div><p>No</p></div>                                    <pre><code>                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></code></pre><p></p>                                    <p class="detail-setting resolution"><strong>Resolution: </strong>                         </p><div><p>0,2 mm</p></div>                                    <pre><code>                                            <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15 %</p></div></code></pre><p></p><br><strong>Filament:</strong><br><a href="http://www.amazon.com/s?url=search-alias&field-keywords=-+PLA" target="_blank" rel="nofollow noopener">PLA                    </a><pre><code>            -                <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                </p><div><p>Top/botton pattern - concentric</p></div></code></pre></div>

Mushroom cloud / Atomový hřib wall decoration

wall decoration/storage

Hugo

<h2>NEW : <strong>parametric with Fusion 360 and STEP files available </strong><a target="_blank" href="https://makerworld.com/en/models/377006" rel="nofollow noopener"><strong>here</strong></a></h2><p>&nbsp;</p><p>I enjoy printing my own storage boxes, but I don't like to add extra hardware like screws. That's why I designed these boxes.  </p><p>I developed a completely new closing mechanism utilizing the natural elasticity of the plastic for a satisfying snap-close.</p><h4>Filaments used in the pictures : <a target="_blank" href="https://formfutura.com?aff=7" rel="nofollow noopener">Li</a><a target="_blank" href="https://formfutura.com/product/refill-petg/?aff=7" rel="nofollow noopener">nk</a></h4><ul><li>FormFutura Refill PETG Signal Blue</li><li>FormFutura Refill PETG Iron Grey</li></ul><p>&nbsp;</p><h3>How to choose your size :</h3><p>&nbsp;</p><p>There are 36 different sizes available to accommodate your needs, with dimensions specified in the name of each STL file. The three numbers correspond to the inside dimensions of the box, the first one is the width, the second is the length and the third is the depth.</p><p>For example, the "Box_bottom_60_60_50" describes the box with inside dimensions of 60mm x 60mm x 50mm :</p><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_h9g3z0yeu3ti.jpg"></figure><p>The top has only two dimensions (width and length), which should correspond to the first two numbers of the bottom.</p><p>For example, the "Box_top_60_60" will match the following bottoms :</p><ul><li>“Box_bottom_60_60_25”</li><li>“Box_bottom_60_60_50”</li><li>“Box_bottom_60_60_75”</li><li>“Box_bottom_60_60_100”</li></ul><p>The "Box_clip" is necessary for each box. The narrowest boxes will require one, while all the other boxes will require two.</p><p>&nbsp;</p><p>All the STL files are already oriented for optimal printing. I recommend PETG and infill of 15% or more.</p><p>&nbsp;</p><h3>Assembly :</h3><p>&nbsp;</p><p>The top and bottom snap fit together. To assemble them, just press them onto a table like this :</p><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_oiifzqba65c6.jpg"></figure><p>It is important to assemble them with this specific orientation as a groove will aid in snapping them into place.</p><p>I find it easier to assemble one of the two hinges first with a twisting motion, and then press the second hinge as described above.</p><p>&nbsp;</p><p>Then insert the clips with a twisting motion like this :</p><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_t5kzv6lq2e4s.gif"></figure><p>When they are instaled, they are very sturdy and will hold the box closed as long as they are in place.</p><p>Just make sure to install them with the right orientation to ensure easy box opening. The face that was on the print bed should be facing outward :</p><figure class="image image_resized" style="width:61.55%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_tte3p1m9l6jn.jpg"></figure><p>&nbsp;</p><p>Enjoy :)</p>

SnapLock Storage Boxes

storage

Just_Josh

<p><strong><u>Remix using LED Lamp kit 001 is now posted along with a remix to fit the Bambu CMYK panels</u></strong></p><p>&nbsp;</p><p>This is my take on the popular 4 pane lithophane lantern. The panes are 115mm x 145mm x 4mm so new panes can be created easily via online lithophane generators. I will be posting a remix to make use of the standard Bambu LED lamp kit light as well.   </p><p>&nbsp;</p><p><i>*Edit - Someone pointed out that the welcome gnome lithophane was not in the lithophane profile.  I have uploaded a new profile that contains the original 4 plus the 2 missing panes.  Sorry about that.</i></p><p>&nbsp;</p><p>The design has been updated to include screw in feet and screws to secure the top and bottom together, making it very secure.</p><p>&nbsp;</p><p>The light is provided by an E12 socket with an LED bulb. Like the one below. These can be purchased in bulk and are fairly inexpensive.</p><p>&nbsp;</p><p>https://www.amazon.com/MYEMITTING-Accessory-Candelabra-Base-Decorations-Christmas/dp/B09G5Z6T2S/ref=sr_1_9?crid=38354NUSTJOOK&keywords=E12%2Bsocket%2Bwith%2Bplug&qid=1706551154&sprefix=e12%2Bsocket%2Bwith%2Bplug%2Caps%2C90&sr=8-9&th=1</p>

4 Pane Lithophane lantern -  uses E12 candelabra bulb

gifts

Jonas Daehnert

<h3>A really loud, flat whistle that you can comfortably carry in your wallet.</h3><p><strong>About the Whistle:</strong></p><p>With a thickness of only 3 mm, the flat whistle fits in any wallet. Despite its flat design, it&#39;s really loud. It is also possible to wear the whistle as a chain or attach it to a keychain.</p><p>&nbsp;</p><p><strong>Sound:</strong></p><p>It has a clear double tone. Due to the size, the sound is quite high. But it is enough to get attention. </p><p>&nbsp;</p><p><strong>Dimensions:</strong></p><p>43 x 22 x 3 mm </p><p>(additional variants 43 x 22 x 4 mm - 43 x 22 x 5 mm - 39 x 11.5 x 3 mm)</p><p>&nbsp;</p><p><strong>How to Print:</strong></p><p>I <strong>recommend </strong>using a <strong>nozzle size of 0.4 mm</strong> and a layer height of 0.2 mm. Don&#39;t use supports. It&#39;s very important that the first layer is perfect, because the wall thickness at the top and bottom is only 0.6 mm. If your printer is well leveled, however, there should be no problems.</p><p>&nbsp;</p><p><strong>Troubleshooting:</strong></p><p>If your whistle doesn&#39;t work properly or you have problems printing a smooth top surface, make sure the<strong> </strong><a target="_blank" href="https://help.prusa3d.com/article/layers-and-perimeters_1748#layer-height" rel="nofollow noopener"><strong>layer height</strong></a> is <strong>set to 0.2 mm</strong>. This ensures that the bottom and top surfaces are printed at the correct thickness. You can also experiment with the <a target="_blank" href="https://help.prusa3d.com/article/layers-and-perimeters_1748#perimeters" rel="nofollow noopener"><strong>perimeter value</strong></a><strong> </strong>if there are problems with bridging. Any value between <strong>2 - 3</strong> is recommended. And last but not least, the <a target="_blank" href="https://help.prusa3d.com/article/layers-and-perimeters_1748#solid-layers-top-bottom" rel="nofollow noopener"><strong>solid top/bottom layer</strong></a> should be set to at minimum <strong>5</strong> each.</p><p>&nbsp;</p><p><strong>Print time:</strong></p><p>~ 10 - 20 min (depending on your settings)</p><p>&nbsp;</p><p>Happy whistling!</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>

Flat Pocket Whistle

survival

JamesThePrinter

<p>These Easter eggs are larger than normal. Actually, they are about the size on an <i>emu egg</i>! I would suggest that you choose 1-3 eggs and display them together. Adding extra eggs printed at varying scales can also look very nice. I have successfully tested them down to 25% scale with the exception of the Lattice Egg. The lattice is a retraction nightmare at smaller sizes. They should scale upwards without issue as well, but beware - they are pretty large already!</p><p>&nbsp;</p><p><i>Check out my other holiday models </i><a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener"><i>here</i></a><i>.</i></p><p>&nbsp;</p><p><strong>Print Settings</strong></p><p>Because of the size, these eggs take a while to print. I found that I could speed up that process by limiting infill to critical areas only. Most of the examples above were printed at 0.2mm layer heights.</p><p>&nbsp;</p><p><a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a></p><p>&nbsp;</p><p>The following filaments were used in the pictures above:</p><ul><li><i>MatterHackers Quantum Blue Raspberry PLA</i></li><li><i>MatterHackers Quantum Green Raspberry PLA</i></li><li><i>MatterHackers Quantum Blue Yellow PLA</i></li><li><i>MatterHackers Quantum Blue Green PLA</i></li><li><i>MatterHackers Quantum Silver Gold PLA</i></li><li><i>MatterHackers Quantum Pink Purple PLA</i></li></ul>