Printed great, thanks for the model. Default settings with Bambu ABS.

Appreciate the model. Printed with Bambu ABS.

Perfect model! I love that the main unit holder is double sided so you could leave the nozzle installed if you wanted to. Printed in Bambu PLA with no modifications to profile.

Nice design and easy print once I changed to Tree Strong support style. Used Bambu PLA.

Nice design and easy print. Used Bambu PLA.

Nice design and easy print. Used Bambu PLA.

Awesome model, thank you!! Printed on X1C @ 200% in Bambu PLA. Modifications: 200% scale - I don't think it could have been any larger and still fit on the build plate. Split lid to parts (not objects) to correctly color the base of the lid and flowers seperately. Arachne wall generation. Avoid crossing wall. Height Range Modifier (15.30mm to 77mm) to print flowers upward at 0.08mm layer height. Turned off supports for lid. Results were fantastic, other than a lot of whispty strings inside the flower pedals that were easily burned off with a lighter. Print took just under 9 hours for container and 54ish hours for the lid (even though the estimate was under 48 hours).

Great model. Wish it was larger (life size hand). Completely amazed how the printer can print these lines in mid-air... Printed in Bambu Marble PLA

Love it! Thank you!! After switching to tree support, I was able to print the main body without issue. Ended up tossing out 4 prints, including the split body, which printed great but I hated the seam when it was glued. Maybe if the seam was along an existing body line it might have been better. Printed in Bambu PLA. Also might reprint the orange cycle as this orange is much more creamsicle. 2 things of note: Brims might be necessary, but they really ruin that edge of the front wheel. The kickstand requires the rear wheel to be 100% inserted. If you are off by even a little, the stand will be too vertical and lifts the rear wheel pretty high.

200% scale, used the slicer to cut in the center and through the legs. Didn't come out perfect, but looks fine from a few feet away. Bambu PLA Other changes: Topmost surface smoothing, Concentric ironing pattern, Arachne wall generation, Back seam position, 10% infill, Adaptive Cubic infill pattern, and used height range modifier to change to 0.1 layer height for about the top 1/2 or 1/3 depending on which part I was printing. Honestly not sure that these changes did anything other than add time, I was mostly guessing here.

Added smoothing to top layers and Arachne wall generation. This added significant amount of print time, but I think it was worth it. Scaled 125% in X and Y, Z was left at 100%. Printed in Bambu PLA. Edit: Added pics.

First print with designer settings was very rough and I needed to adjust the hole sizes, so I reprinted with .2 layer height on .4 nozzle. Increased infill a bit and let it fly. I used the slicer to add in parts to fill the holes then used negative parts to get my custom requirements. I know I could have used Fusion, but for some reason it keeps hanging on launch for me... probably just need to reboot. Either way, printed with Bambu PETG-HF with the above settings and it came out MUCH nicer than the .35 layer height in the original. Otherwise, this is a very nice model.

Well designed and pretty universal. Printed in Bambu PETG-HF. Needed to notch out the back for some Skadis supports that were in the way for my specific use case.

Works as expected, added additional section for cable holder in Bambu Slicer. Printed in Bambu PETG-HF.

Overall looks good. Printed in Bambu PETG-HF.

V4 to V5 perfection. Printed in Bambu PLA. I was able to reuse all of my v4 internal and external add-ons. Still able to leverage Skaids mounts on the outside. Absolutely love this model.

Cute and practical. Printed in Bambu PETG-HF Green Second one is 33.33% larger in Z-Axis.

Nice model and printed well in Bambu Basic PLA Black/White. Still trying to get my head around Left to Right vs. Standard.

Perfect fit and print! Wish there was USB cable storage as well, maybe moving the clip storage to the sides near the top of the model and making a larger open storage area where the clips are currently could work? Much better than storing in the original plastic housing and fits perfectly in my drawer under my printer.

Great print, I can appreciate the care that went into design! I'm sure there are improvements for how the bottoms could have been sorted, but in the end, none of the "ugliness" is visible. Printed all parts in Bambu PETG-HF.