Droid_Junkie

bedebe

I&#39;ve seen at least 6 versions of the <a target="_blank" href="https://us.store.bambulab.com/collections/spare-parts-for-ams/products/ams-bottom-cover-unit" rel="nofollow noopener">AMS Bottom Cover Unit</a>. I haven&#39;t really seen any variations on the V.2 model. I decided to update the V2 AMS Base with a dual plate holder and side braces for the 2-tier stand. I&#39;m sure, like others, they have more than 6 build plates like me. Hence, why I made it dual-sided. If you don&#39;t want the dual plate holder, there are options for a single-sided build plate holder with a normal support base and brace for the opposing side. I ran across the model by ShaneT and spoke with him about some variations. Due to all the inconsistencies from Bambu Labs, Shane decided to make a universal 2-tier build plate stand. If you want something universal, you should check out his model <a target="_blank" href="https://makerworld.com/en/models/414865#profileId-316881" rel="nofollow noopener">here</a>. If you have only Version 2 of the AMS, then this might be the version for you. I have made a few thickness variations from the original and with the build plate holder. I wanted equal spacing and gaps for the build plates.&nbsp;There are four build plates in the print profile:Upper Left and Right BracketsLower Bracket and Side Brace for either sideLower Left Bracket and Side Brace with plate holderLower Right Bracket and Side Brace with plate holderYou can choose from several configurations, including:Available configurations:Plate holders on both sides: 1 x Upper Brackets + 1 x Lower Left Plate Bracket &amp; Brace + 1 x Lower Right Plate Bracket &amp; BracePlate holder on the right: 1 x Upper Brackets + 1 x Lower Bracket &amp; Side Brace + 1 x Lower Right Plate Bracket &amp; BracePlate holder on the left: 1 x Upper Brackets + 1 x Lower Bracket &amp; Side Brace + 1 x Lower Left Plate Bracket &amp; BraceNo build plate holder: 1 x Upper Brackets + 2 x Lower Bracket &amp; Side Brace&nbsp;&nbsp;In addition to the printed parts, you will need the following:4 x 420mm 2020 aluminum profile4 x M5x10mm or 12mm + 4 x M5 T-Nut for side bracesFor added stability, use the following optional parts:2 x 380mm 2020 aluminum profile4 x 6mm L-Joint Brackets and screws

AMS v2 - With Dual Build Plate

P1S parts

Print Design

This heart-shaped box is a symbol of love and devotion. The eternal rose, in the shape of a heart, represents a love that transcends time. It is a gift that symbolizes eternal affection and sincere affection. Place this box in your room, on the nightstand or in any special place. Its heart shape provides a romantic and delicate touch.

Heart of Eternal Roses

Random

modybird

Credit to <a target="_blank" href="https://www.thingiverse.com/mz4250" rel="nofollow noopener">mz4250</a> for making the model.&nbsp;Looks great at 0.24mm layer height. You can reduce it to imporove quality even further, but print will take a lot longer

Articulated Worm With Spikes and Teeth

Articulated

2emme3dlab

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA Eryone Black Transmission Distance: 5 PLA Eryone Blue Transmission Distance: 5 PLA Eryone White Transmission Distance: 5 PLA Eryone Yellow Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #11 (0.96mm) swap to White At layer #14 (1.2mm) swap to Yellow for the rest.

Nightmare Before Christmas - the starry night HueForge

Hueforge

Encrust3d

This is a tool to help lube the Z axis lead screws for the Bambu A1 printer. I designed this tool to be able to fit inside the slots on the Z axis of the A1 printer and, when you are done spreading the lube, you can rest this tool down on a flat surface without that surface getting grease on it. The spreader is angled so you can spread at an angle like the video shows.

P1S parts

Random

Articulated

Hueforge

A1 parts