Dripster

Alex and Tonic 3D

I designed this little watering can to water my little avocados I breed using Mikolas Suza's Avocado Floaters. Use 4 perimeters to ensure tightness. I use PETG and it works absolutely well.

Mini Watering Can

Neues! Muss sortiert werden

MalcTheOracle

<h3>Introduction</h3>Have you ever wanted to create a QR Code of your own? Have you ever been put off because it seems so hard? Have you ever wanted to be able to print your own custom QR Code and use it as a sign or a keyring?&nbsp;Great news, now you can.&nbsp;Introducing the QR Code Sign and Keyring Parametric Creator, the easiest way to create the QR Codes of your dreams.<h3>Version 3 has arrived.</h3>Version 3 introduces full font support for the header and footer text of your QR Code keyring, sign, notice, placard, or whatever you use it for. Choose from 30+ fonts for the captions, you can ask the Customizer to match the footer style to the one you choose for the header to make life a little bit easier.&nbsp;A full font list is provided at the bottom of this page.<h3>Version 2 has arrived.</h3>Version 2 brings far more customisation including the ability to specify screw holes to mount your QR Code to a wall.  Automatically generated stands in different styles so you can desk-mount your QR Code. Even more keyring choices than before. Header and Footer captions that are fully customisable including font styles.  Automatic compensation so you do not have to worry how one thing affects another, the code adjusts everything for you.  The stand for example can automatically add a bottom lip to the QR code so it fits perfectly in. any of the stands.<h3>Uses</h3><ul><li>Keyring</li><li>Signage</li><li>Wall Mountable</li><li>Desk mountable with auto-stand generation (you choose style)</li></ul>You can create QR Code keyrings, wall signs, and desk signs of any size you require. You can add optional text above and below the QR Code.  If you want to mount your QR Code on your desk or reception area, choose one of several different style stands that will be automatically generated for you.&nbsp;This is a Work In Progress more features will be added if people find this useful. Feel free to request features in the comments.<h3>Is the AMS required?</h3>No, you do not need an AMS, you choose if the colour is changed by the AMS or manually at the correct time. Instructions below.<h3>Data you can store</h3><ul><li>Text</li><li>URL</li><li>eMail</li><li>Phone</li><li>Wifi</li><li>vCard</li></ul><h3>55 Individual Settings, millions of combinations</h3><ul><li>Width and Height</li><li>Thickness of the back</li><li>Thickness of the data (QR Code)</li><li>Border size</li><li>Corners: square or rounded, the amount of roundness</li><li>Keyring hook: on or off, auto-rounded joints so it doesn&#39;t break off easily</li><li>Keyring hook: hole size and border size</li><li>Keyring hook location: top, bottom, left or right</li><li>Header &amp; Footer Captions: font size, font weight, margins &amp; height</li><li>Optional Screw Holes</li><li>Optional Stand generation, 3 different styles automatically generated for your custom QR Code</li><li>Advanced QR Code settings for the professionals</li><li>Automatic sizing and compensation for all features chosen</li></ul><h3>Design with Data</h3><ul><li>WiFi - Set Data Type to WiFi and enter wifi details in the Data WiFi section</li><li>vCard - Set Data Type to vCard and enter vCard information in the Data vCard section</li><li>Phone - set the Data Type to Phone and enter the Phone number in the Data text box</li><li>All others - set the Data Type to your choice and enter the value in the Data text box</li></ul><h3>Pre-print - Processing</h3><h4>Optional Stand:</h4>If you have chosen an optional stand, you only need to split the model into the QR Code and the stand within Bambu Studio and then arrange the two parts on different build plates to suit your needs.&nbsp;There are currently three different desk stands to choose from, which are automatically generated to match the dimensions you have selected for your QR Code.  When both parts have been printed, you place your QR Code into the stand, it is as simple as that.<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000477192/design/2024-05-28_a7ca43ce43ae1.png"></figure><h4>AMS or PAUSE for colour prints</h4>Once you have created your QR Code, download the STL or 3MF file and add a PAUSE or Colour change at the correct layer.&nbsp;Follow these instructions:<ol><li>Open your downloaded QR Code in Bambu Studio</li><li>AMS only: Make sure you have at least two filaments selected.</li><li>Press the [Slice Plate] button.</li><li>Move the BOTTOM layer marker upwards (6 - 1.20 in the preview image) until the back of the QR Code is no longer visible in the preview.  Which layer you need depends on your settings, do NOT assume it is layer 6.</li><li>Right-click over this layer and…<ol><li>AMS: Select “Change Filament”, and choose your filament for the data portion.</li><li>Manual: Select “Add Pause”.</li></ol></li><li>Print your QR Code.</li><li>During the print process…<ol><li>AMS: The AMS will swap the filament to the filament you chose.</li><li>Manual: The printer will pause, remove the filament you used for the base portion and insert the filament ready for the data portion. Resume the print job.</li></ol></li><li>Your QR Code will finish printing.</li></ol><h3>Font List</h3><figure class="table"><table><tbody><tr><td><ul><li>Inter</li><li>Kanit</li><li>Lato</li><li>Lora</li><li>Merriweather</li><li>Merriweather Sans</li><li>Montserrat</li><li>Open Sans</li><li>Open Sans Condensed</li><li>Noto Sans</li><li>Noto Sans Display</li><li>Noto Sans Mono</li><li>Nunito</li><li>Nunito Sans</li><li>Oswald</li><li>Playfair</li></ul></td><td><ul><li>Playfair Display</li><li>Playfair Display SC</li><li>Plus Jakarta Sans</li><li>Railway</li><li>Roboto</li><li>Roboto Mono</li><li>Roboto Slab</li><li>Rubik</li><li>Rubik Dirt</li><li>Source Sans 3</li><li>Ubuntu </li><li>Ubuntu Condensed</li><li>Ubuntu Mono</li><li>Ubuntu Sans</li><li>Ubuntu Sans Mono</li><li>Work Sans</li></ul></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;I couldn&#39;t have provided this model and customisable tool without the excellent work of <a target="_blank" href="https://github.com/xypwn" rel="nofollow noopener">xypwn</a> who created the scadqr library released under the <a target="_blank" href="https://opensource.org/license/MIT" rel="nofollow noopener">MIT license</a>.&nbsp;

Premium QR Code Sign & Keyring Parametric Creator

QR Code Anhänger

SThane

Shortly after mounting the AMS Lite to the top of my A1, a spool fell off while printing. A quick search led me to another model which seemed to work pretty well, but it was a bit longer than I wanted. So I shortened it, and made a couple other minor aesthetic changes.&nbsp;Though I posted it, I wasn't really satisfied with it because it was a bit challenging to get the lock to seat properly. A couple days after posting it, someone reached out with an idea that would definitely improve it, so I made a quick mock-up. As I was testing it out, I realized that I could simplify the design, and hopefully make it both easier and more effective.&nbsp;The Bambu AMSL Hubcap uses a simple twist lock to wedge under and expand the arms of the rotary spool holder, and provides a large surface area to keep most spools from sliding off.&nbsp;Note: The print profile is configured to print by object, instead of by layer to avoid excess color changes, leading to wasted filament from purging and priming two times each layer. This means that there will be two objects printed in the first filament, then two printed in the second filament. If you choose the same filament for both sets of objects, it will still print as two groups, rather than all four at once, but the print time should be about the same.&nbsp;Changes:<ul><li>24/01/12: Created a mirrored hubcap for the counter-clockwise rotors (yellow)</li><li>24/01/13: Added position numbers (inspired by <a target="_blank" href="https://makerworld.com/en/u/2556571816" rel="nofollow noopener">@morgan.trebern</a>'s print)</li><li>24/01/13: Added a deep chamfer to keep the drag chain from catching on the edge</li><li>24/01/18: Added a groove in the fins to lock the rotor claws in place</li></ul>

Bambu Hubcap - AMS Lite Rotary Spool Lock

AMS Lite

noahjowen

&nbsp;When I used and downloaded the original design by “Jorge Rui” I had issues with the container fitting in Bambu Lab and Polymaker spools, I have redesigned the footprint of it, so that it will fit in spools with smaller diameters in the middle, and fit very easily with Bambu Lab spools. I also made the holes a little smaller, since I had issues with desicant falling through and making a mess in my AMS. Hope this design solves any problems anyone else might be having. Happy Printing!

Desiccant Container (custom fitted)

Filamentverarbeitung

macmanluke

Ikea Billy Filament Spool Holder Shelf Rack Suit 19mm / 3/4&#34; rods - curtain rods, aluminium/steel tube or pipe, wood dowel etc Requires 8x 3.5mm/6G x 16-18mm countersunk screws per shelf

Ikea Billy Filament Spool Holder Shelf Rack

Ikea Billy

H-Printed

Hello A1 Fans!&nbsp;This is my slim line compact Babo A1 Tool boxThe Babo dimensions are 3 x 5&nbsp;Additional Information:Printed in: eSun PLA+ Black PollyTerra Muted WhiteFYI The Polly Terra has been a bit of a problem printing and getting stuck in the AMS 4 to 1 block causing it not to retract. Standard A1 settings plus a brim

Babo A1 Tool Tray Compact 3 x 5 

BaBo

KYZ Design

<ul><li>Modeled from scratch to optimise for strength, rigidity and a quality feel, not for “fast print”.</li><li>Slightly deeper than standard bins.</li><li>No magnet holes.</li><li>Walls are 2.6mm thick.</li></ul>If you need 1x1 bins specifically, check out <a target="_blank" href="https://makerworld.com/en/models/50848" rel="nofollow noopener">these ones</a> - they are much deeper and have no infill in the base.<img src="https://makerworld.bblmw.com/makerworld/draft/536961/2023-12-27_a08a7bc1dedd78.jpg">&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my other Gridfinity models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models.

Gridfinity 2.6mm Wall Divider Bins - 20 Sizes

Gridfinity

Kroeskoppie

Original Source Material: - Original Creator Blastoise Model: <a target="_blank" href="https://www.thingiverse.com/neb1236/designs" rel="nofollow noopener">neb1236</a> on <a target="_blank" href="https://www.thingiverse.com/thing:5162417" rel="nofollow noopener">Thingiverse.</a>- Original Creator AMS Version Blastoise Eyes: <a target="_blank" href="https://makerworld.com/en/u/3378101082" rel="nofollow noopener">Waikikiprod</a> on <a target="_blank" href="https://makerworld.com/en/models/13162#profileId-13157" rel="nofollow noopener">Makerworld</a>/<a target="_blank" href="https://www.printables.com/model/536623-bicolor-blastoises-eyes" rel="nofollow noopener">Printables</a>. Some small notes:  - Please support the original designers, they did the awesome job of making this model.  - For licences/selling the print: please contact the original designers, not me. I did not create this awesome model. - On16-02-2024 , I created a printable version in Bambu Studio which should work on the A1 Mini. It has the same printing settings as the X1C/P1P/P1S version, but all the parts are divived on more plates, since the build plate on a A1 Mini Printer is quite a bit small. Maximum printtime for every plate has been reduced to 4 hours maximum because of this.  - I am not able to test the A1 Mini version, simply because I do not own this printer and only have a X1C. Use the profile on your own risk.  Description: A remix/share from the awesome Blastoise model. I have scaled alle the parts to 150%, as I think a Blastoise should be bigger!This Blastoise is about 20 cm high and weights about 700 grams! I also did the following: - I used a 0.16 settings basefile I like and edited it. - I sorted all the different parts on different plates for easier printing, based on color. - The default eyes are replaced by the AMS version, which makes dual color printing possible. - I adjusted the flowrate in my settings profile so the coloring of the model should be the same overal. - I put ‘Ironing’ off in my settings profiles, since this would give coloring differences, most notable in the brown shell parts. - I fixed some of the more noticable parts that where having Top Layer Spheres by <a target="_blank" href="https://www.youtube.com/watch?v=h4SiDX0q0Xs&list=LL&index=1" rel="nofollow noopener">using this guide</a>.&nbsp;If there are more suggestions for better settings, please upload them! The color sorting in the 3fm-file is based on the following filament that I used for this print: - Black: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B0BT9F3BCD/?_encoding=UTF8&pd_rd_w=0HzkR&content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&pf_rd_r=NPE0CGVRYZDD97JQ8MTB&pd_rd_wg=V4TwI&pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&ref_=pd_gw_ci_mcx_mr_hp_atf_m&th=1" rel="nofollow noopener">eSUN PLA+ Black.</a> - Beige: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQH6H55/?_encoding=UTF8&pd_rd_w=0HzkR&content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&pf_rd_r=NPE0CGVRYZDD97JQ8MTB&pd_rd_wg=V4TwI&pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&ref_=pd_gw_ci_mcx_mr_hp_atf_m&th=1" rel="nofollow noopener">eSUN PLA+ Beige</a>. - Blue: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQJ9H8F/?_encoding=UTF8&pd_rd_w=0HzkR&content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&pf_rd_r=NPE0CGVRYZDD97JQ8MTB&pd_rd_wg=V4TwI&pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&ref_=pd_gw_ci_mcx_mr_hp_atf_m&th=1" rel="nofollow noopener">eSUN PLA+ Light Blue.</a> - White: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQ98RNP/?_encoding=UTF8&pd_rd_w=0HzkR&content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&pf_rd_r=NPE0CGVRYZDD97JQ8MTB&pd_rd_wg=V4TwI&pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&ref_=pd_gw_ci_mcx_mr_hp_atf_m&th=1" rel="nofollow noopener">eSUN PLA+ Cold White.</a> - Brown: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQ75QG2/?_encoding=UTF8&pd_rd_w=0HzkR&content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&pf_rd_r=NPE0CGVRYZDD97JQ8MTB&pd_rd_wg=V4TwI&pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&ref_=pd_gw_ci_mcx_mr_hp_atf_m&th=1" rel="nofollow noopener">eSUN PLA+ Brown.</a> - Grey: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B0BT9G9GMQ/?_encoding=UTF8&pd_rd_w=0HzkR&content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&pf_rd_r=NPE0CGVRYZDD97JQ8MTB&pd_rd_wg=V4TwI&pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&ref_=pd_gw_ci_mcx_mr_hp_atf_m&th=1" rel="nofollow noopener">eSUN PLA+ Grey.</a> Please note that eSUN is currently switching to Carton Spool Holders if you want to print from the AMS-System. I used the ‘old’ plastic filament spools which I currently still have. A complete timelaps video from all the plates/parts can be found here:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=sRZ0PQ6itUQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/sRZ0PQ6itUQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Blastoise 150% Multipart Color (20 cm height)

Pokémon

Xander Designs

Check out our new Fortnite Models:Victory Crown Pillow- <a target="_blank" href="https://makerworld.com/en/models/182885#profileId-201478" rel="nofollow noopener">https://makerworld.com/en/models/182885#profileId-201478</a>Fortnite Gift Box- <a target="_blank" href="https://makerworld.com/en/models/171979#profileId-188799" rel="nofollow noopener">https://makerworld.com/en/models/171979#profileId-188799</a>&nbsp;Update: 21/02/2024Due to the small black border pieces being hard to print and glue together for some, i have redesigned the model to incorporate these in a base plate making it super easy to glue together.&nbsp;Update: 03/01/24As Requested Pre-painted Print in place AMS Profile added, no need for glue as the sign will friction fit the base.Plate 1 does require 5 different colors so you would need more than 1 AMS Unit, unless you change the light blue to white then you can print with 1 AMS.…………………………………………….&nbsp;This is a must have Trophy for any Fortnite enthusiast.Designed to be printed on standard machines so no need for AMS.Sliced on 5 individual colored plates that match the original logo but feel free to mix up the colors.Glue is required to fix the parts together.&nbsp;Sell my prints commercially by joining my <a target="_blank" href="https://patreon.com/xanderdesigns?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">Patreon</a>Want to say ‘Thank You’  <a target="_blank" href="https://www.buymeacoffee.com/xanderdesigns" rel="nofollow noopener">Buy me a coffee</a><figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/Kmmdzij6lG8"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=Kmmdzij6lG8"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/Kmmdzij6lG8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;

Fortnite Trophy #1 Victory Royale

Figuren und Merch

fobiDesign

Convenient storage of Bambu Lab A1 Mini tools on the IKEA Skadis board.

A1 Mini Tools Organizer for Skadis

A1 Erweiterungen

One Maker Show

<h2>Oh Yeah, Another Gridfinity System 📦</h2><h4>No Movement for Box, No Money for Magnets</h4>This variant was born from a straightforward need, a Grifinity system that doesn&#39;t make the boxes move without spending money on magnets.The system is developed with respect to <a target="_blank" href="https://gridfinity.xyz" rel="nofollow noopener">Standard Gridfinity</a> rules.&nbsp;PLA, PETG, ABS what you prefer, no difference.&nbsp;You can Also Use these Boxes with Standard Gridfinity Grid.&nbsp;<h2>HEIGHT</h2>There are 4 heights available:<figure class="table"><table><tbody><tr><td>H0*</td><td>H1</td><td>H2</td><td>H2</td></tr><tr><td>10.5 mm</td><td>21 mm</td><td>42 mm</td><td>63 mm</td></tr></tbody></table></figure>*H0 Is intended to be used like a tray, not a box.<h2>Label</h2>I don&#39;t like that labels are joined to the box because life sometimes needs changes, so I made a Label that fits the top of the Boxes. Customize Labels Text it&#39;s easy like Sunday morning.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000440625/design/2024-04-23_54ea766f00825.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000440625/design/2024-04-23_5ed61c2a72fb1.jpg"></figure>&nbsp;<h3>ATTENTION</h3>I made a terrible mistake, the dimensions for Label Base 2/3/4/5 are wrong. If you download It before 04/25/2024 don&#39;t print it.  Sorry for the filament waste.&nbsp;&nbsp;<h2><a target="_blank" href="https://makerworld.com/en/models/440624#profileId-346300" rel="nofollow noopener">HERE</a> You can find the special Gridfinity with Pin</h2>&nbsp;&nbsp;__________________________________________________________________________<h3>Hey, If you like my <a target="_blank" href="https://makerworld.com/en/@OneMakerShow" rel="nofollow noopener">stuff</a> Maybe You also like my <a target="_blank" href="https://www.instagram.com/mattia.confalonieri/" rel="nofollow noopener">SHOW</a></h3>&nbsp;

Gridfinity Boxes for Gridfinity with Pin

Ikea Alex

Jakob1508

official 3d made a greate job modeling this so i had to print it and share it here on makerworld. &nbsp;14.10.23: i have added a print plate with a testfit model in 100 and 120% try some different sizes to fit it perfectly13.10.23 sadly it does not fit my big head i will have to print it bigger to fit and then i will update a profile. &nbsp;&nbsp;&nbsp;

Iron Man Helmet + testfit file

Helme

Fletch

Barrel planters perfect for growing herbs or flowers in. I&#39;m still waiting for my herbs to get ready for transplate and plan on transferring them into these planters once they&#39;re ready in a few weeks. The barrels can be self watering if you add a wicking material to bottom of the insert or you can water them like normal from the top. If used as self watering, keep the water level below the first “metal” band so that only the wicking material makes contact with the water. The barrels are water tight and will not leak any water.&nbsp;SizesSmall<ul><li>52mm (2&#34;) insert diameter</li><li>89mm (3.5&#34;) height</li></ul>Medium<ul><li>76mm (3&#34;) insert diameter</li><li>130mm (5.1&#34;) height</li></ul>Large<ul><li>101mm (4&#34;) insert diameter</li><li>172mm (6.8&#34;) height</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796129/2024-03-31_1fb12d39be3d1.jpg"></figure>

Barrel Planter

Gegenstände

OCDTOOLFREAK

Yes there are a lot of other battery holders including my own, BUT this one is king of aesthetics with its color a and design looking to par with the Makita family of tools. Mounts solid to the wall and holds up to 4 batteries. Hollowed out to not use so much plastic and strong enough to keep them locked in. Lets face it we all buy the most expensive tools because (A)- They work great & (B)- They look good soooo….. the accessories have to match.Go print, enjoy and please help me out by rating with pictures of your print. I love seeing everyone's print and how they used there's!&nbsp;Thanks for the support and appreciation for my work…..as you all know printing can be expensive and creating takes time if you'd like to support me even further then buy me a coffee here….. https://www.buymeacoffee.com/ocdtoolfreak

Makita 4x 18v battery wall mount

Nützliche Tools

sOniQ

<ul><li>A simple yet strong holder for a roll of paper towel</li></ul>

IKEA Skadis Paper Towel Holder

Ikea Skadis Module

a.vdh_1983

If you like my work, i'm open for donations via Paypal. It is much appreciated.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL</a>&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.8 PLA BambuLab Basic Red Transmission Distance: 4.8 PLA BambuLab Basic Gold Transmission Distance: 4.8 PLA eSUN White Transmission Distance: 1.6Swap Instructions: Start with Black At layer #20 (1.68mm) swap to Red At layer #22 (1.84mm) swap to Gold At layer #23 (1.92mm) swap to White for the rest.&nbsp;Reminder:My models mostly cover the entire bed, this means the purge line is sometimes running through the bottom of the print. You have 3 options here: - Leave as is, you can just cut them of afterwards. - Remove immediately after the purge line is printed. - Scale the model:*** WARNING *** WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT! The Z-height must always be as original, otherwise the print is messed up.

4-color HueForge Deadpool

Hueforge

giuliomaffei90

This is a modular container for BambuLab filament samples or custom ones with the same dimensions.Each drawer can hold up to 16 samples, and the drawers are easily stackable, slightly increasing the space occupied.&nbsp;Ran out of space in the display? Simply print another one and stack it.&nbsp;The file also includes optional TPU feet.&nbsp;Also, take a look at my custom swatch with transparency and label.<a target="_blank" href="https://makerworld.com/en/models/396856#profileId-298201" rel="nofollow noopener">https://makerworld.com/en/models/396856#profileId-298201</a>&nbsp;

Modular Filament Swatches Case

Filamentprobe

SavageLau

<h2>If you want a commercial license, check out my bio and get it from Patreon.</h2><h2>Personal use only.</h2>&nbsp;This model is design for MakerWorld light contest (2/5). Complete free version is only available on here Makerworld. <h3>Many people have contacted me said they willing to pay for the model. Other platform product manager reach and out said I could use their platform and selling this design for some money, but I have decided to keep it here for free for now. So there will be more people could enjoying it :) So show me your finshed print, I would like to see it. </h3><h3> Anywhere else you see this model upload is Unauthorized (please notify me and report them), beside my own account (SavageLau). </h3>&nbsp;<h2>If you would like purchase LED light needed for this design and filament from Bambu Lab Offical website: Affiliate link is below, so I can get some commission to support my future work. </h2><h2><a target="_blank" href="https://shrsl.com/4h4np" rel="nofollow noopener">https://shrsl.com/4h4np</a> </h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-03-23_4ad27b7082fe3.png"></figure><h2>Filaments that I use for this project: (Bambu Lab Offical website:)</h2><h2><a target="_blank" href="https://shrsl.com/4h4ns" rel="nofollow noopener">https://shrsl.com/4h4ns</a> </h2>&nbsp;&nbsp;&nbsp;<h2>You may also like this design:</h2>PeaShooter Lamp Kit 001. <a target="_blank" href="https://makerworld.com/en/models/174475#profileId-191833" rel="nofollow noopener">https://makerworld.com/en/models/174475#profileId-191833</a> &nbsp;&nbsp;&nbsp;My boss saw some Bellsprout light the other day and she want me to design one. I have one LED Lamp kit come with my a1mini and sitting for a while. So why not turning it into what she want. So the design started adpot the lamp kit into Bellsprout.I found this pic on Google, based on the posture and proportion started deisng.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_bc131748fd272.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_33679f29d502a.png"></figure><h2>Update: </h2><h3>2/2/2024. A new profile was made for a1mini. Increased infill/walls on base and body part. </h3>Model main body have been reduced in size inorder to meet the build plate size for a1mini with muti-color prints. &nbsp;<a target="_blank" href="https://makerworld.com/en/u/2010665163" rel="nofollow noopener">@Sascha2202</a> feedback it is a bit hard to keep banlance. Weight increased on printing profile by adding more infill and walls. Weight for that part from 160g to 202g, lowered center of gravity. Consider head is around 40g + led weight, it should do well now. <h3>2/1/2024. Joints redesigned. </h3>Improved joints firction load, strength, tolerancing. New turning angle sets around 13.5 degrees max for each joints. <figure class="image image_resized" style="width:36.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_d00693a8b7acb.png"></figure>“Head” part fit and finish improving. <h3>Revisions and Tests today:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_ffe7e41994dec.png"></figure>&nbsp;<h2>Before you print(Important!):</h2>Run the joint test print first with the filament you are going to use for joints and body, before you doing the full print! This is important. Depend on filaments you use for the joint parts, there will be sinkage rate difference, and firction load on joint will be different.&nbsp;I put very tight tolerancing on design, but it may not work as intended when you printing with your filaments, so run the test and confirm joints is very tight to each other. Other wise You will not get the desired result.&nbsp;&nbsp;Joints with other parts are standard size. There is one “Tight” profile for joints. There are two types of joint, regular and with wire clip one. You will need to print total of 12 or above (maybe less than 15) to get good proportion. &nbsp;Joints designed best work with 4 wall layers, and 10% to 20% infill, adding more infill will not improve the strength, will only leading part failure during assembly. &nbsp;<h2>Hard ware:</h2>This design require Lamp LED Kit 001 from Bambu Lab. All other parts are printable. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_bca061fd80f1d.png"></figure>&nbsp;<h2>Post work:</h2>Removing brims from all parts, when you remove brim from joints part, confirm it is fully removed. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_dec1b2c670225.gif"></figure><h2>Assembly:</h2>Refer these gif image. Joints is a bit hard to push in, refer how I do it, holding the bottom part with you fingure, it will reduce the change of failure. &nbsp;Joints:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_5c978e23e8634.gif"></figure><figure class="image image_resized" style="width:51.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9f2e463b2d8a6.gif"></figure>Fully assembly:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9a975d341b61f.gif"></figure>&nbsp;&nbsp;&nbsp;<h2>Design:</h2>Lamp kit is 60mm dia, 8mm thickness. based on that dims and make rough draft to evaluate the overall size.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_34bf66e6b20e5.png"></figure>&nbsp;Working on some parts, and integrate them in the end.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_4880a9ab2336a.png"></figure>&nbsp;I started with wanting ball joint on the head, so it will able to turn angles. End up why not to have more ball joints on the body.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_b08f0ea2e5ee9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ec7f991cbaa.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ed16d7dd498.png"></figure>&nbsp;Ball joints is pain in the axx to work with. I want it to have a lot of friction load in normal condition. so the outter shell shall have very small tolerance to the ball or even smaller. Ended spending a lot of time try in truth to testing out different tolerances and make design revisions.Still not perfect, but it work for this application. You gain a lot of DOF, but it is a bit brittle, depends on your materials.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_153933e0ba5bb.png"></figure><h2>Revisions and tests:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_641c974fd0d58.png"></figure>

BellSprout Lamp LED Kit 001

Led Lampen

yzffish

给x1c准备的配套工具箱，使用卡扣组合，整体尺寸约 16x16x25cm，内部空间约 14x14.5x16cm&nbsp;***卷帘门请使用韧性材料打印！***&nbsp;----------------------------------------------------------------------------------------------------------------------------------------3/9更新： ·稍微提高了销钉的强度 ·略微加宽了卷帘门的宽度和把手长度 ----------------------------------------------------------------------------------------------------------------------------------------6/15更新： ·把插销部分单独分出来了，避免和侧板一起打印时出现失误·添加了一个医药箱标志&nbsp;<img class="image_resized" style="width: 31.57%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149674/design/2024-06-15_33803765d93ae.png">&nbsp;&nbsp;