Drew Austin

waltersworld3d

<a target="_blank" href="https://www.patreon.com/waltersworld" rel="nofollow noopener">https://www.patreon.com/waltersworld</a>&nbsp;Be sure to check out our Patreon for all newly released models, monthly giveaways, and the opportunity to have models designed custom for you&nbsp;I&#39;m the Juggernaut….!&nbsp;This might not be for everyone, but it&#39;s for me. I don&#39;t think Juggernaut gets enough love, so here&#39;s our adaptation of what a L3GO version might look like!&nbsp;He does NOT have to be printed at full size, just remember to scale down accordingly. He is smaller than Hulk by default, legs are stationary.&nbsp;I had a heck of a time getting the supports out of the mask during “auto-generation,&#34; so I manually painted the problem areas. Fairly straight forward print, test fit the hands before sanding the pegs for assembly. Everything should fit snugly for positional hold.

Bricks Juggernaut

Bricks

The Crafty Maker

Introducing my very first sponsored project. When Bambu Lab released their new translucent PETG filament I've reached out to them with an idea that have been thinking about for a while now, a model that resembles a stained glass window. Their translucent filament is a perfect fit for this.&nbsp;I was pleasantly surprised that they agreed and liked the project idea, so they sent me a batch of translucent PETG filament to get things started. &nbsp;There were a lot of ideas to choose from, but the space shuttle stuck with me, since I'm a big space nerd, so that was an obvious choice for me.&nbsp;Designing it was quite challenging because the color of the translucent filament varies on the thickness of the part. It took quite some test printing to get the best color and transparency, but eventually I was able to find the right balance and finished up the model.&nbsp;The filaments I've used are all Bambu Lab filaments. The parts that resemble the stained glass are printed in Translucent PETG Light Blue, Orange, Brown and Grey. Only the white parts are printed in a PETG that's not part of the translucent filament line. Those are printed in Basic PETG Transparent.&nbsp;The front and back frame are both printed in Basic PETG Black. All the other parts are all printed in Basic PLA. The box, lid and led panel or led strip holder are printed in the color black, the diffuser is printed in the color white.&nbsp;The box and the lid have little compartments where you can glue in magnets (width 6mm & height 3mm) but this is optional and not needed to keep the lid on the box.&nbsp;Print Settings&nbsp;Stained glass pieces<ul><li>100% infill</li><li>Top surface pattern: Octogram Spiral</li></ul>Front & Back Frame<ul><li>Arachne wall generator or detect thin walls</li></ul>Backlight Led Panel Holder<ul><li>Regular support on build plate only</li></ul>Backlight Led Strip Holder<ul><li>Outer brim recommended</li></ul>Diffuser<ul><li>100% infill</li><li>Outer brim recommended</li></ul>Box & Lid<ul><li>Outer wall speed 90 for consistent surface finish</li><li>Seam position: Back</li></ul>&nbsp;For the light source I've used following Bambu Lab products&nbsp;EU Store<ul><li><a target="_blank" href="https://eu.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes" rel="nofollow noopener">Led panel</a></li><li><a target="_blank" href="https://eu.store.bambulab.com/en-be/products/s-shape-led-strip-light-ws2812b-rgb" rel="nofollow noopener">Led strip</a> </li></ul>US Store<ul><li><a target="_blank" href="https://us.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes" rel="nofollow noopener">Led panel</a></li><li><a target="_blank" href="https://us.store.bambulab.com/products/s-shape-led-strip-light-ws2812b-rgb" rel="nofollow noopener">Led strip</a></li></ul>ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Space Shuttle Stained Glass Lightbox

Stained Glass

lst_lab

3D Model Description: Broken Roman or Greek Column with Drainage HolesThis captivating 3D model represents a fragmented Roman or Greek column, exuding an air of ancient elegance. Its unique broken effect adds intrigue and versatility, making it suitable for various purposes:<ul><li>Bowl or Container: Use it as a decorative bowl or container, perhaps to hold small items or trinkets.</li><li>Planter for Plants or Flowers: Inspired by the photo you uploaded, this column can serve as a charming planter for small plants or flowers.</li></ul>Key Features:<ul><li>Classic Aesthetic: The column design pays homage to the architectural beauty of ancient Rome and Greece.</li><li>Broken Effect: The fractured appearance adds character and visual interest.</li><li>Functional Art: Whether as a decorative piece or a functional vessel, this model combines form and utility.</li></ul>Technical Specifications:<ul><li>Material: PLA marble (can be customized based on your preference)</li><li>Color: Neutral tones to complement any setting</li><li>Drainage Holes: Five holes have been thoughtfully added to the bottom to allow water to escape, ensuring healthy plant growth.</li></ul>Usage Ideas:<ol><li>Table Centerpiece: Place it on a dining table or sideboard as an eye-catching centerpiece.</li><li>Indoor Garden: Fill the broken section with soil and plant small succulents or herbs.</li><li>Decorative Storage: Use it to store keys, jewelry, or other small items.</li></ol>Note: Feel free to adjust the size, color, and material to suit your vision.Happy printing! 🖨️

Broken Column Flower Pot (Simple Tray)

Flower Pots

FLOWERS GEAR

“Voyager1” refrigerator magnet  /  旅行者一号冰箱贴

Magnets

AKinferno

*** Free to print, NOT to sell *** For Commercial Rights, you must join my Club.&nbsp;KID FRIENDLY VERSION ADDED - Sep 6 2023 - The blunted model has been added. Special thanks to @Roman and @KarminSupreme for feedback and assistance with testing the “kid friendly” blunted version. Their feedback helped me polish out the kinks. Changes include:<ul><li>Removed the sharp points and edges. This obviously increases the poly count, but reduces the pain. Want kids to be able to play with the dragon :)</li><li>Reduced the size/protrusion of the horns and frills. Required to make it curved, but it also resulted in faster and easier prints.</li><li>Improved symmetry of the 1st layer body and tail pieces. The poly reduction of the organic shape caused a lot of irregular shaped on the base. I balanced those out, thickened some thin areas, and reshaped some of the pieces.</li><li>Lots of work on the tail and body segment the tail connects to. This should improve symmetry, movement and increase durability.</li></ul>The symmetry and durability updates will be made to the standard model by the weekend.&nbsp;Crystal Night DragonLow Poly Contest Entry. From 3 million polys to about 30k. That is 1%. Most of those are in the connecting pieces. I had to keep those slightly curved. External pieces are the lowest poly count I could make and retain the general shape.Clear PLA was a poor choice to show detail, but seemed appropriate. Printed without issue at 80% scale. Some parts were touching at this smaller size, but broke away easily for full articulation. Purple/green dragon is at 100%.Please let me know if there are problems; easily broken pieces, too sharp pieces, etc. I will correct it. Keep an eye on this listing for additional variants. Enjoy!&nbsp;SCALINGScaling up: No special requirements.Scaling down: Separate the model into individual objects before printing. The slicer then does a better job of ensuring the walls don't connect. &nbsp;PRINT SETTINGS<ul><li>2+ walls [I use 3]</li><li>10%+ infill [I like 20% weight, but lightning or 0% should work]</li><li>Looks good at .2mm, any layer height your printer can handle. </li><li>No supports or brims required</li><li>Scaling 75% or greater successfully tested so far. </li><li>RECOMMENDATION: Separate the model into individual objects before printing. The slicer then does a better job of ensuring the walls don't connect. Especially useful for scaling the model down. It should be fine at 100%, many hours spent ensuring that is the case.</li></ul>CHANGES TO NIGHT SPIRITLowered poly count from 3mil to 200k in the slicer. Opened in Blender and reduced poly count on non-linking areas as low as I could without losing the general shape. The head required significant remodeling to restore some density to make it printable. The tail changed a bit to eliminate excessive overhangs. The body was reassembled from one piece. I will work on improving symmetry with upcoming revisions. Final poly count is around 30k now. &nbsp;ATTRIBUTIONThanks to sunset, sunset_3d_design and MZ4250 for making and uploading awesome models! Attribution of them and myself required if relinking this model elsewhere.&nbsp;COMMERCIAL RIGHTSI purchased unlimited commercial rights from sunset3d for the dragon model. So, I have commercial rights to my derivative models. Commercial access provided by joining my Printables Club. <a target="_blank" href="https://www.printables.com/@AKinferno" rel="nofollow noopener">AKinferno | Printables.com</a>&nbsp;UPDATE HISTORYDec 10th Update - Added version 1.3. Received a couple comments about fused pieces. I believe this to be caused by the latest update to PrusaSlicer and related slicers. Because I have quite a few these printed previously on older versions of the slicer without issues. I believe they are corrected now. Please let me know if you find issues, I will correct them ASAP. I am very active on Printables and will usually correct them before the end of the day. Thanks, and enjoy! Sep 17th Update - Added v1.2 of the original model. Cleans up some of the thin sections or oddly shaped base layers. Cleaned up odd shapes, made pieces more symmetrical like the blunt model. Reassembled to ensure no bonded segments.Blunt 1.2 Update - This version should be the last needed for the blunt model. I found no touching pieces. I modified and reinforced the tail piece improving flexibility. Feedback is appreciated, so I can provide the best model possible. I have found during all this testing that separating the model into individual objects improves the slicers separation of the parts. This is why it took hours to ensure the pieces didn't touch. I would slice model, see pieces touching, separate the model and shift the offending piece. Then, merge and save, close file, reopen file, reslice and now some other pieces were connected. Rinse and repeat. It was super tedious, and may vary by slicer, so please let me know if you find some merged pieces. But I believe it is good now. Still need to update the original model, but that means both will be 1.2 in the end.Blunt 1.1 Update - After posting the new model, I started it printing and saw there were two tail segments that weren't flat on the bottom. So now Blunt model 1.1 was added to correct the issue. Sorry if you downloaded it in the 15min between posting 1.0 and fixing it with 1.1. The good news, both current models are version 1.1 now :) 1.0 is archived.Sep 3 Update - Added a beta blunted version in the Kid Friendly folder. If it gets the thumbs up, I will remove BETA from the folder and label it 1.0. Until then, please let me know what you think. It is definitely more polys than it before. But maybe adding hundred, so it is still low-poly compared to the original. Update 1.1 - Modified the head to mirror the better side, to improve printability. I also increased the indentation for the mouth so it is more noticeable. I will work on the other parts over time. V1.1 printed in purple/green coextrusion filament from Gratkit above.

Articulated Crystal Night Dragon v1.3 (low poly remix)

Charlie

Printer Profiles

GammaLand

03/02/2024 updateDesigned two decorative badges that can be embeded on honeycomb panel. Uploaded a separate print profile. Feel free to try it.&nbsp;— A honeycomb version of <a target="_blank" href="https://makerworld.com/en/models/180821#profileId-198992" rel="nofollow noopener">Easy-to-Assemble Dice Tower</a>. To fit all components in kit cards, I scaled 0.75, so the overall filament cost is only 56g. This dice tower can still roll 15.8mm dices smoothly.

Honeycomb Dice Tower Kit Card (Bonus Badges Available)

Dice Tower

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;WARNING: Contains small parts. Not intended for children below 7 years old.&nbsp;Santa Hat now available! <a target="_blank" href="https://makerworld.com/en/models/75526#profileId-80041" rel="nofollow noopener">Download it here!</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041159/design/2023-10-14_4b62fc15fd96.jpg"></figure>A <a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16764" rel="nofollow noopener">base/diorama builder</a> is available for download for this mini figure model!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041159/design/2023-10-14_fa3603e58a759.jpg"></figure>Pumpkin head is compatible with all of my other Minecraft kits with the same neck joint. Go and kitbash!_____________<h3>IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS</h3>Please note that I am sharing my designs to any one to enjoy but for personal use only. I have NOT provided any commercial license to any one allowing the sale of 3d printed copies of my designs. Seeing my designs being sold for profit is discouraging for me to continue coming up with more designs. I will not hesitate to report to Etsy and other online sites if I find them being sold.__________Easy-to-assemble, quick print, kit card of Minecraft Snow Golem in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.&nbsp;Print as oriented, with NO supports needed. Model comes with breakaway supports.&nbsp;Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)<h4>Usage Options</h4><ol><li>Assemble as is and use as toy/collectible; or</li><li>Use the alternative part with loop and glue the halves together to make for a great keychain ornament!</li></ol>

Minecraft-inspired Snow Golem Kit Card/Keychain

Kit Card

Turbospeed

Dot, Yakko, and Wakko magnets for all Animaniacs fans out there. I used (3) 6x3mm magnets for each. These are all AMS-ready and placed face-down on the bed to add the texture from the PEI sheet. I will add a profile without magnets for anyone wanting to use different mounting options. Sizing up should be ok but I found this is the smallest size that produces good quality. Enjoy!

Animaniacs Magnet Pack (Flushed)

Geeky Stuff

radim.kabatek

Pocket Morse code decoder and symbol chart in one. The card is reversible, easy to store in a wallet or mobile phone or as a pendant. Printed in plastic, it is waterproof and suitable for the outdoors.&nbsp;To use the decoder side of the card, simply select the left or right side of the decoder according to the initial Morse code symbol (dot or comma) and move in that direction with each additional symbol. The end of the Morse code determines the resulting letter.&nbsp;The other side of the card contains all the characters and digits.&nbsp;The card consists of 3 layers, where the middle layer is the color of the font. Due to the greater transparency of the light filaments, two versions are available - for the light and for the dark background version. For printing, pauses are inserted for color changes. PLA or PLA+ material is suitable for printing.

Double-sided pocket morse card

Gifts

GekoPrime

Replaces pieces used in the Nina Ottosson interactive treat puzzle dog toys marketed in the US by Outward Hound<a href="https://outwardhound.com/brands/nina-ottosson/" rel="nofollow">https://outwardhound.com/brands/nina-ottosson/</a>So far this includes<ul><li>The white bone used in the “Dog Brick”, “Dog Tornado”, and “Dog Smart” puzzles</li><li>The red lid used in the “Dog Brick” puzzle</li></ul>Leave a comment if there's another piece you need and be sure to post your make!

Replacement pieces for Nina Ottosson interactive treat puzzle dog toy - bone, "dog brick" lid

Replacement Parts

Z3Dartandtech

<h3>If you like my work, leaving a BOOST would mean a lot!</h3><h3>Every contribution helps me refine my designs and create new projects</h3>&nbsp;Dimension: 50mm x3mmLayer 0.22 layers of colorlow purge

Ghostbuster's keychain

Keychains

ProfessorBoots

Hello this is a fun 3D Printed RC project that&#39;s a great way to get hands on experience with standard DIY development electronics.&nbsp;This model specifically is an updated/improved version of the MiniSkidi V2.0 Model. Updates include tracks, quick swap attachment plate, PCB now has mounted 16340 battery holders and a fuse for a much more user friendly experience.&nbsp;I&#39;ll link the video I made going into depth on the upgrades below as well as a link to my website where you can pick up an electronics kit that can be combined with your own 3D Printed parts if you&#39;d like to support the development of these little DIY RC projects.&nbsp;RC Skid Steer Electronics Kit: <a target="_blank" href="https://professorboots.com/products/rc-skidsteer-kit-v3-0" rel="nofollow noopener">https://professorboots.com/products/rc-skidsteer-kit-v3-0</a>&nbsp;If you&#39;re in an area that&#39;s unable to receive kits consider becoming a ProfessorBoots Workshop Member which will unlock courses to take you step by step through sourcing parts and uploading the code.ProfessorBoots Workshop Pass: <a target="_blank" href="https://professorboots.com/products/professorboots-workshop-pass" rel="nofollow noopener">https://professorboots.com/products/professorboots-workshop-pass</a>&nbsp;How To Build: <a target="_blank" href="https://professorboots.com/a/members" rel="nofollow noopener">https://professorboots.com/a/members/</a>&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/Lo-3M9GaUIs?si=JqwjnujVsZZQUi6g"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Lo-3M9GaUIs" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;

3D Printed RC SkidSteer V3.0

Jaxel

It's a simple model. Covers your American style NEMA 5-15R receptacles.&nbsp;If you appreciate my models, please consider <a target="_blank" href="https://ko-fi.com/ultrajaxel" rel="nofollow noopener">buying me a coffee</a>!

NEMA 5-15 Receptacle Power Dust Cover Plug

Electronics

Model Aeronautics

Jacoob16

The rock croc charm for your croc!

The Rock Croc Charm

Vincent

Brian Dean

<h2>Embedded Magnet Dispenser Tool for Multiple Diameters and Thicknesses</h2><h3>PROFILE NOTE</h3>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.<h3>Latest Update (2024-04-21): Quick summary</h3><ol><li>additional magnet sizes</li><li>magnet size text embossed on the barrel and also included on the slider</li></ol>See below for the more detailed update notes.<h2>Magnet Dispenser for 3D Prints: Simplify Magnet Insertion with Precision</h2>The Magnet Dispenser Tool is expertly designed to streamline the insertion of magnets into 3D prints. This tool not only speeds the process of inserting magnets into 3D Prints, it also ensures correct orientation and secure fitting, making it ideal for projects that require precise magnet placement.<h3>Key Features</h3><h4>Dual Dispensers for Perfect Alignment</h4><ul><li>Includes two dispensers for each magnet size – one for north-up and one for south-up orientations</li><li>Use different colors (e.g., red for north-up and blue for south-up) to help easily identify the dispenser&#39;s orientation</li><li>Eliminates the hassle of misaligned magnets</li></ul><h4>Design and Utility</h4><ul><li>Developed after extensive refinement</li><li>Allows for friction-fit insertion and is also suitable for magnets that are glued</li><li>Tapered tip facilitates use in tight spaces</li></ul><h4>Ease of Use</h4><ul><li>The dispensers are designed to accommodate the specified magnet sizes for their internal holding magnets, but can dispense magnets of any thicknesses for the specified diameter. For example, for the 6x3mm dispenser, you will need 6x3mm magnets to assemble the dispenser, but once assembled, that dispenser can dispense any 6mm diameter magnet such as 6x1, 6x2, 6x3, 6x5, etc.</li></ul><h4>Convenience and Storage</h4><ul><li>Features a snap-on cap with an embedded magnet and a top slider magnet</li><li>Ensures secure storage and prevents accidental magnet spillage</li></ul><h4>Customization and Printability</h4><ul><li>No supports needed for printing</li><li>STL and STEP files included for personal customization</li><li>Compatible with PETG, PLA, ASA, ABS, etc</li><li>Adjust x/y hole compensation if needed for perfect fit</li></ul><h4>Visual Guide</h4><ul><li>Fusion 360 images provided for easy assembly and understanding of the internal mechanism</li></ul><h4>Use the Magnet Dispenser for a hassle-free, precise, and efficient magnet insertion experience in your 3D printing projects.</h4><h3>Supported Magnet Sizes</h3><h4>Dispensers are now provided for the following magnet sizes as of Version 5</h4><ol><li>2x1mm</li><li>2x2mm</li><li>2x3mm</li><li>3x1mm</li><li>3x2mm</li><li>3x3mm</li><li>4x1mm</li><li>4x2mm</li><li>4x3mm</li><li>5x1mm</li><li>5x2mm</li><li>5x3mm</li><li>6x2mm</li><li>6x3mm</li><li>7x2mm</li><li>7x3mm</li><li>8x2mm</li><li>8x3mm</li><li>8x4mm</li><li>9x2mm</li><li>9x3mm</li><li>10x1mm</li><li>10x2mm</li><li>10x3mm</li><li>12x2mm</li><li>12x3mm</li><li>15x2mm</li><li>15x3mm</li><li>20x2mm</li><li>20x3mm</li></ol>NOTE 1: The 1mm magnet thickesses are just too thin to work reliably with the friction-fit of the slider and caps. Therefore, I have made the pockets of the “1mm” thickness magnet dispensers to be that of the 3mm variety so that they work. So to assemble a 1mm magnet thickness dispenser, you will need to purchase a few 3mm thick magnets to assemble the dispenser. A 2mm thickness will likely work ok, too. Note that the text on the dispenser will still say “D x 1 mm” for the barrel, “Dx1” on the cap, and “D/1” on the slider, so you know what magnets you have loaded into it.&nbsp;NOTE 2: the above are the sizes needed to assemble the dispenser. The dispenser can still dispense any thickness of magnet as long as the diameter is the same. So if don&#39;t see your specific magnet thickness listed above, you can still print the correct diameter, assemble the dispenser with the correct magnet thickness, and dispense other thicknesses.&nbsp;STEP and STL raw files are included if you do not wish to use the provided profile.<h3>Quality Assurance Testing</h3><ul><li>All dispenser sizes have been printed by me and extensively tested</li><li>I have purchased all magnet sizes at significant expense to myself to ensure fit</li><li>Magnet diameters are tricky for press-fit tolerance and controlled by no less that 5 Fusion 360 parameters that must be balanced to achieve good fit<ul><li>Multiple iterations of each dispenser were printed and refined</li><li>Many kilograms of filament and hundreds of hours of print-time were consumed during this process</li><li>All to ensure the best quality printing and fit-up for each dispenser size</li></ul></li></ul><h3>About the Profiles</h3><ol><li>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</li><li>NOTE: The “Designer” profile is a single profile that contains plates for all magnet sizes so far. Please ignore the “total time” reported by MakerWorld for the profile. You only need to print the plate(s) that you need. Each plate takes about 2.5-2.9 hours on my X1C using the included “PETG” profile which is slowed down for good PETG layer adhesion and quality.</li><li>While the other profiles may be ok, their file / update version may be out of date. So if you want the latest sizes and model improvements, please choose the top “Designer” profile.</li></ol><h3>Accessories</h3>Be sure and check out some nice accessories that other folks have created to work with these dispensers.<ul><li>Tip Caps - these are nice caps for the dispensor tip. Not only do they help keep the magnets contained within, but they also protect the tip. Additionally, they are labeled with the magnet size, which is nice. Thank you @onegotowned ! <a target="_blank" href="https://makerworld.com/en/models/149038#profileId-162633" rel="nofollow noopener">https://makerworld.com/en/models/149038#profileId-162633</a></li><li>Vertical Workbench Stand - This is a very nice stand for select diamagers made by @nickramsey57. A number of folks have asked about stands / organizers for the dispensers, so this model will likely be useful to a number of folks. Thank you @nickramsey57 ! <a target="_blank" href="https://makerworld.com/en/models/206388#profileId-226561" rel="nofollow noopener">https://makerworld.com/en/models/206388#profileId-226561</a></li><li>Vertical Workbench Stand (parametric) - Here is another very nice stand made by @RevHazlett. You can specify the dispenser sizes that you want it to hold and then generate, making it customizable to your needs and the common magnet sizes that you use. Thank you @RevHazlett! <a target="_blank" href="https://makerworld.com/en/models/435087#profileId-340031" rel="nofollow noopener">https://makerworld.com/en/models/435087#profileId-340031</a></li></ul><h2>Update History</h2><h3>Version 5: 2024-04-21</h3><ol><li>Emboss the magnet size text on the Barrel (see photos), allowing one to view the size from the side, and also allowing one to print all of the barrels on a single plate and not get the barrels mixed up as to what size they are for.</li><li>Include the magnet size text on the Slider (see photos), allowing one to print all of the sliders and caps together on one plate and not get the sliders mixed up as to what magnet size they are for. Also provides additional text identification of the magnet size within.</li><li>Include 11 new magnet sizes:<ol><li>3x1mm</li><li>4x1mm</li><li>5x1mm</li><li>7x2mm, 7x3mm</li><li>8x4mm</li><li>10x1mm</li><li>15x2mm, 15x3mm</li><li>20x2mm, 20x3mm</li></ol></li><li>Re-organize the plates so that they are a little easier to manage. All dispenser sizes for each “diameter” are spread across three plates now - the Barrels, the Red Caps and Sliders, and the Blue Caps and Sliders. This allows one to “print-by-layer” instead of “print-by-object”, and the text also comes out better. Additionally, it is now easier to construct a plate with all of the size variations on 3 individual plates and print them all at once.</li></ol><h3>Version 4: 2023-12-26</h3><ol><li>Fixed an issue where the smaller diameter magnets such as the 2mm, 3mm, and possibly the 4mm magnet diameters could inadvertently slip through the vertical barrel slider stem slot. Prior to this update, the slider stem was a fixed 3mm + tolerance width. With Version 4, the slider slot is now dynamic based on the magnet diameter. So now, the smaller diameter magnets are captive within the barrel and cannot slip out inadvertently.</li><li>Tighten up the tolerances between the “slider” and the “barrel” for a better fit and smoother operation.</li><li>Use the Profile: “Version 4: All Sizes …” for the latest from this update.</li></ol><h3>Version 3: 2023-12-22</h3><ol><li>Added additional magnet sizes<ol><li>2x1mm, 2x2mm, 2x3mm</li><li>9x2mm, 9x3mm</li></ol></li><li>Text is now added within the Fusion 360 Model File, eliminating the need to add the text using Bambu Studio<ol><li>Ensures consistent text placement and easier colorizing of the text</li></ol></li><li>All plates are included for all magnet sizes, two dispensers per plate, print sequence: print-by-object</li></ol><h3>Version 2.1: 2023-11-28</h3><ol><li>Added additional magnet sizes<ol><li>3x2mm</li><li>4x2mm, 4x3mm</li><li>5x2mm, 5x3mm</li><li>6x2mm</li><li>8x2mm, 8x3mm</li><li>10x2mm, 10x3mm</li><li>12x2mm</li></ol></li><li>The magnet size text is included on the cap for easy identification - see photo</li></ol><h3>Version 2: 2023-11-20</h3>Updated to “Version 2”. Significant updates an enhancements have been made, some seen, some unseen.<ol><li>Added additional magnet sizes<ol><li>3x3mm</li><li>12x3mm</li></ol></li><li>Each magnet size is on its own plate, two dispensers per plate, print sequence: print-by-object</li><li>Redesigned “thumb slider” for greater comfort and stronger press force</li><li>Slider stem has been reinforced</li><li>Many enhancements for smoother operation with internal chamfers and fillets, enhanced tolerances, and strengthening of key internal components</li></ol>&nbsp;&nbsp;&nbsp;

Embedded Magnet Dispenser Tool for 3D Prints

Tools

dadhacks

This is a different take on the standard purge (poop) chute and bucket. Let your little ghosts slide or drop into the ghost trap, with handle for easy removal and dumping. 2 options available - 1 with the containment unit for those that put their ghost trap behind the printer, and 1 with a slide for those that want their ghost trap on the side.&nbsp;Notes:<ul><li>Ghost trap is meant to be assembled with glue. This was done to keep purge and print time to a minimum. Flat design meant to accommodate tight placement against printer.</li><li>This has been broken out into 5 different build plates to limit each to 4 colors per plate for those with only 1 AMS.</li><li>Smooth PEI recommended for the side panels and doors; just gives a nicer finish.</li><li>Need to use 2 15x3 magnets for the slide.</li><li>Need to use one of the longer M3 course threaded screws (or similar) from the scraper kit that came with the printer to hang the containment unit chute.</li><li>Supports required for containment unit chute and part of the handle.</li><li>Vent holes in side of containment unit chute to keep from impeding any airflow to the vents on back of printer.</li><li>Please note the build plates are preselected. If you want to use a different build plate, please ensure you click the nut icon next to the build plate to change. </li></ul>

Ghost Trap Poop Chute Kit for BambuLab P1 and X1 Series 

Printer Accessories

LoboCNC

Also check out my new <a target="_blank" href="https://makerworld.com/en/models/136529#profileId-148605" rel="nofollow noopener">Diamond Stone version</a> of this rolling knife sharpener.&nbsp;Most home knife sharpeners have you drag the blade across a sharp edge or small diameter grinding surface. While this works well initially, after repeated use, it'll start to form divots on the edge -- kind of like washboarding on a dirt road -- eventually turning your knife edge into a ragged mess. This rolling sharpener works more like a sharpening stone, where the flat surface keeps the edge flat and even.&nbsp;Modeled after those pricey rolling diamond or ceramic sharpeners, this one uses 3"/75mm dia. discs of emery paper instead. You can buy adhesive backed discs, or you can simply cut out discs from standard sheets and apply them to ends of the sharpener with glue stick or double-sided tape. I use 400 grit emery paper on one end of the sharpener for rough sharpening and 600 grit on the other end for finishing.&nbsp;The knife holder holds the blade at a fixed angle with three 12mm dia. x 3mm thick neodymium magnets. Sitting flat, it holds the blade at 15 degrees, but there is also an adjustment screw that will raise the angle by 2 degrees per rotation of the screw. Once you've got it set to the proper angle, roll the sharpener back & forth along the blade with light pressure, as shown in the animation. Just make sure that you are pressing the front edge of the holder firmly against your worksurface so that you are getting 3-point support from the front edge of the holder and the adjustable post in the back.&nbsp;Assembly of the sharpener is simple: just screw the two rotating discs together through the center of the cylindrical body. I added wide rubber bands as tires to the crowned edge of the rollers for a smoother feel, but it'll also work without them. For the knife holder, you just need to superglue the three 12mm x 3mm magnets in place and then insert the angle adjuster screw. Oh, and if your plastic wants to squeak, just use a little light grease or oil on the shaft during assembly.

Rolling Knife Sharpener

Kitchen Gadgets

MadMax3D

4 stained glass-themed color lithophanes. These lithophanes are designed to be used in the Hexaphane display system. You can find the display case <a target="_blank" href="https://makerworld.com/en/models/64338#profileId-67423" rel="nofollow noopener">here</a> for use with tealights or a USB light stick (see display case for links to the lights).&nbsp;These lithophanes were printed with the Bambu CMYK bundle at .07mm layer height. I used PIXEstL to create my own color profiles and create stls with 7 layers of color instead of the traditional 5 layers generated from other programs. The hex pattern was made using a negative volume mask on the slicer plate. These also print well using IIIDMax Fuchsia, Light Blue, Yellow and White.&nbsp;Profiles are included for X/P/A1 series printers and for the A1 Mini. All were printed using a .4mm nozzle (with .3mm line width) and .07mm layer height. These can also be printed with a .2mm nozzle if desired, but the .4mm nozzle with a .3mm line width setting gets very close to the quality of the .2mm nozzle. The raw stl files for all the lithophanes are included in the download section packaged as zip files.&nbsp;<a target="_blank" href="https://makerworld.com/en/u/2612385699/collections/54109" rel="nofollow noopener">More Hexaphane Collections</a>&nbsp;Printing InstructionsThe .3mf files are very large (~130MB) and take a minute to load and slice. Please be patient. The print profiles have all of my preferred settings, but since the .07mm layer height is less than the .08mm specified in the printer settings, you may get the following error. Make sure and select “Ignore” or Studio will automatically set the layer height to .08mm. It's perfectly fine to print at .07mm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/324956/2023-12-20_649b3b76c81898.png"></figure>&nbsp;

Stained Glass Collection For Hexaphane Display System

Home Decor

Maker1O1

Original V1 version without articulated legs.&nbsp;It's a reupload as it was removed by bot.&nbsp;Originally remixed by AKinferno and licensed under CC-BY-NC-SARemixed for AMS, and improved scaling by ME.&nbsp;&nbsp;