DrakondSilvers

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ IIID Max Black Transmission Distance: 0.5 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ IIID Max White Transmission Distance: 5.6&nbsp;Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Grey At layer #21 (1.76mm) swap to White for the rest.

Axolotl Salamander Art Hueforge

friends

2emme3dlab

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;You can complete this print without an AMS. Use the profile that says NO AMS and it will pause at the correct height instead of doing a filament change. At that point you change your filament and let it continue until the next pause where it will wait for the next manual filament swap.&nbsp;Filaments Used: PLA Eryone Blu Transmission Distance: 5 PLA Eryone Black Transmission Distance: 5 PLA Eryone Red Transmission Distance: 5 PLA Eryone White Transmission Distance: 5&nbsp;Swap Instructions: Start with Blu At layer #3 (0.32mm) swap to Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to White for the rest.

Spiderman HueForge (AMS / no AMS needed)

to sell

pilim_

I am using this and original glass front door to print ABS with zero issues!&nbsp;Fast print, cheap materials, no supports needed&nbsp;Use M3x8 screws&nbsp;Panels I`m using: https://www.amazon.com/gp/product/B08LSW1VM6/ref=ox_sc_act_title_1?smid=A1THAZDOWP300U&th=1

P1P Side Panels - enclosure

p1p upgrades

Chewey

IMPORTANT: This is just a model shell grip for a VR controller.NOTE: This is for the Oculus Quest 1 controllers. If you are looking for the Quest 2 version, <a href="https://www.prusaprinters.org/prints/54967-chewey_glk-17-oculus-quest-2-vr-pistol-grip" rel="nofollow">see here</a>.Introducing the "Chewey_GLK-17_Q1"!For more details, please refer to the <a href="https://www.prusaprinters.org/prints/54967-chewey_glk-17-oculus-quest-2-vr-pistol-grip" rel="nofollow">Quest 2 version's descriptions</a>. The picture is from the Quest 2 version, however, everything is the same except for the sizing of the hollow to fit the respective controller.In addition to the reference models I noted in the Quest 2 posting, this Quest 1 model also uses the 3D scanned controller image posted by user <a href="https://www.thingiverse.com/thing:3729872" rel="nofollow">aolshove on Thingiverse</a>.Each hand controller needs:<ul><li>1x Grip</li><li>1x Slide</li><li>1x Front lower</li><li>2x Screws</li></ul>Assembly notes:<ul><li>One screw is used to join the Grip with the Front lower. These were separated for ease of printing.</li><li>One screw is used on the side to secure the Slide in place in case it slips off while mid VR session.</li></ul>NOTE: The grip STL is for the RIGHT hand. Simply mirror it to print for the LEFT hand.Derivatives and remixes are under Attribution-NonCommercial-ShareAlike, but please also include its original name "Chewey_GLK-17_Q1" somewhere on the final design. Please do not monetize on this model. Thanks!<h3>Print instructions</h3>Layer height: 0.2 Infill: 15% Support: see "Suggested_print_orientagion_Chewey_GLK-17_Quest_1_set.3mf"Refer to "Suggested_print_orientagion_Chewey_GLK-17_Quest_1_set.3mf" for print orientation and paint on support using PrusaSlicer.The grip and front lower should be the same color.

"Chewey_GLK-17_Q1" Oculus Quest 1 VR pistol grip

quest

KenPrint3D

mickey mouse christmas ornament&nbsp;

Mickey Mouse Christmas

family

Markury

I saw a tiktok with a keyboard that was all ducks and I had to have one. This one is only suitable as an escape key or similar since they don't like to sit next to each other. Edit: An experimental “v2” version is provided that has enough clearance for multiple ducks to sit next to each other. Still, this version does not address that keys interfere with each other in adjacent rows. I did make an updated version, and it's available for purchase on the orange website that starts with a “P” on my profile, Markury.&nbsp;Please share your makes. Happy printing!&nbsp;Note: My print preset has supports under the beak with support blockers inside the keycap. You might be able to get away with no supports if you slow it down enough.

Ducky Artisan Keycap (AMS)

Luna

TripleGWorkshop

I worked to keep these as thin and light as possible + the best fuzziness/time balance.Choose smooth sides if you intend to tile them, or all-fuzzy for singles.The template is included if you would like to change anything go for it.

20cm Sound Dampening Acoustic Panels

practical

itsmehames

I did not create this model. All credit goes to <a target="_blank" href="https://www.printables.com/@dasjulian3_228135" rel="nofollow noopener">@dasjulian3_228135</a> at pintables.Original link <a target="_blank" href="https://www.printables.com/model/146025-rainbow-six-siege-signal-disruptor/files" rel="nofollow noopener">here</a>.&nbsp;I separated the print onto 3 build plates for each colour (Black, Silver and Gold). Some supports are needed.

Rainbow Six Siege - Signal Disruptor / Mute Jammer

seige

JBeahn

This is a slim case for an iPhone 12 or 12 Pro (not the mini, not the max). I could not find a reasonable one online, so I made one myself. After 3 prototypes, I feel happy with this one. Side buttons have thinned walls so they flex nicely to allow you easy, tactile access to the side buttons. Camera bump is well protect. Corners all have added thickness because that is where a phone usually strikes when dropped (I've had many years of success with cases with exaggerated corners). The back of the case is a bit thicker by design to protect the phone, though it also helps in peeling off the printer bed.&nbsp;The image of my prototypes is in black TPU, but obviously print in whatever color or material you'd like (though the case does have to bend and stretch a little to get a phone in so TPU is your best bet…I prototyped with PLA once and it was a comically bad experience).

iPhone12 Pro TPU Case

phone case

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.200mm x 200mm.&nbsp;&nbsp;You can complete this print without an AMS. Use the profile that says NO AMS and it will pause at the correct height instead of doing a filament change. At that point you change your filament and let it continue until the next pause where it will wait for the next manual filament swap. This being a three color Hueforge, it will require two pauses with manual filament changes.&nbsp;&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA Overture Silk Gold Transmission Distance: 4 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Gold At layer #28 (2.32mm) swap to White for the rest.

Gold Dragon Hueforge NO AMS Needed

cool (no color)

cruse2382

prints in two pieces so you don't need an ams.&nbsp;supports take a bit of getting off but will work on that as i can