Dr.Richard.Fabulous

xallex digital design

Replaceable HEPA/Carbon Charcoal Filters for Bambu X1C/P1S Chamber Exhaust Stackable Chamber Exhaust port filter housing for either HEPA or Carbon Charcoal filters. &gt; Housing mounted to printer using existing threaded holes on the printer, using x4 M3x6mm button cap screws. &gt; Mesh Layer and Top mounted to Housing using x4 M3x6mm button cap screws. &gt; Filter Cartridge slides in from the side. &gt; Optional Housing with modification for use on printers that have the AMS Hub installed are included&gt; Optional TPU gaskets are included &gt; Optional Additional Filter Housing can be added to use multiple filters, this is fitted between the Housing and the Mesh Layer using x4 M3x25mm button cap screws. *Please use multiple filters with caution. Using both may be too flow restrictive on the chamber exhaust fan. Using less filter materials may be in order. Use recommendations: - Use top glass riser to increase airflow - Set the chamber fan to 70% or higher. HEPA Filters: (<a target="_blank" href="https://amzn.to/49Uu6vF" rel="nofollow noopener">https://amzn.to/49Uu6vF</a>) Cut-to-Fit Carbon Pad for Air Filters Charcoal Sheet (<a target="_blank" href="https://amzn.to/4bd4iw1" rel="nofollow noopener">https://amzn.to/4bd4iw1</a><a target="_blank" href="https://amzn.to/49OXIe5" rel="nofollow noopener">)</a> Screws: x4 Qty M3x6mm Button Cap screws to mount Housing to printer (<a target="_blank" href="https://amzn.to/44hnBlr" rel="nofollow noopener">https://amzn.to/44hnBlr</a>) x4 Qty M3x6mm Button Cap screws to secure Top and Mesh layer to Housing (<a target="_blank" href="https://amzn.to/44hnBlr" rel="nofollow noopener">https://amzn.to/44hnBlr</a>) If optional second filter housing is used: x4 Qty M3x25mm Button Cap screws to secure optional second filter housing, Top, and Mesh layer to Housing (<a target="_blank" href="https://amzn.to/44hnBlr" rel="nofollow noopener">https://amzn.to/44hnBlr</a>) Material: Silver - IIIDMAX PLA+ (<a target="_blank" href="https://amzn.to/4dhLtK4" rel="nofollow noopener">https://amzn.to/4dhLtK4</a>) Light Blue -IIIDMAX PLA+ (<a target="_blank" href="https://amzn.to/4deSoUc" rel="nofollow noopener">https://amzn.to/4deSoUc</a>) Red - Hatchbox (<a target="_blank" href="https://amzn.to/3Ukwbvc" rel="nofollow noopener">https://amzn.to/3Ukwbvc</a>) - Design Update - 4.12.24 - - Included an optional filter tray addition to use both filters simultaneously. *Please use multiple filters with caution. Using both may be too flow restrictive on the chamber exhaust fan. Using less filter materials may be in order. - Increased the diameter of the holes in the Top, and Mesh parts to allow the M3 screws through. - Added optional TPU gasket files. Thanks <a target="_blank" href="https://makerworld.com/en/@wiczdesigns" rel="nofollow noopener">@wiczdesigns</a> for the suggestions. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419089/design/2024-04-12_b002cd1bffc35.jpg">   - Design Update - 4.11.24 - I have added main housing to accommodate printers that have the AMS Hub installed. Thanks to user @redborder for the suggestion and reference photos. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419089/design/2024-04-11_f7d508262327d.png"> - Design Update - 4.9.24 - I have added a filter box and lid for use with Carbon/Charcoal Filter Material, to extend the carbon filtering from the chamber exhaust.

HEPA/Carbon Filters Bambu X1C/P1S Chamber Exhaust

X1C Upgrades

ProjectSkyDroid

Wanted to reprint this in PAHT-CF so it would endure the scorching Arizona summers but also wanted to make some adjustments to the design to make it even easier to print then my first version. &nbsp;Changes:-V2 now prints at a default orientation on its side with the front laying down against the plate. &nbsp;-Various small adjustments and changes have been made to reduce filament usage by about 30% since this can now be printed without using any supports. &nbsp;-The inner top face of the slots have an added ‘support’ arm added to allow for the long bridging in this area. &nbsp;-Triangular cutouts added to front face as design element and to reduce filament use while maintaining necessary rigidity. &nbsp;-Side circles cutouts have been replaced with triangular elements for different look and also to facilitate cleaner print with no supports.&nbsp;-All other mounting holes and dimensions identical to V1 and still 100% with the mounting plate.&nbsp;Designed this mounting system to for my F250s center dash console to attached AMPS and RAM mount style plates/balls. Inspired by similar systems sold by various vendors, but with adjustments to add the required rigidity for 3D printed application. &nbsp;Grab the back plate also for added strength and rigidity when attaching to the plastic dash tray:&nbsp;https://makerworld.com/en/models/61836#profileId-64262&nbsp;Printed in PAHT-CF, and is very strong.

X1C Upgrades

auto