Doctor P

madizmo

This is the latest version of my AMS saver after bambu asked me to take down my old models. Apparently some people managed to damage the feeder leds with some of the previous models. This version mounts to the top of the feeder unit using double sided sticky tape so there is absolutely no chance of causing any damage to your AMS unit. I used the clear 1mm thick sticky tape off Temu on mine and they are stuck very well. I&#39;ve been using 100mm ptfe tube with no issues, if you seem to get loading issues try 85mm. The ID of the ptfe hole is 4.2mm but because of the print orientation it can still be tight, i run an allen key through it along the top edge to smooth the layers a bit. You can play with flow rate a bit as well if too tight&nbsp;works best with my <a target="_blank" href="https://makerworld.com/en/models/172221#profileId-189118" rel="nofollow noopener">filament guides</a>, the ones in the pictures i&#39;m still testing but the originals work great&nbsp;&nbsp;Disclaimer: This is a modification to the machine and any issues caused by these mods will not be covered by Bambu.

AMS Saver V5

Mods

P1S BSMT

Storage Slots to be mounted under shelf. Allows storage for multiple Types of Wrap, Foil and Paper used for cooking and food storage. Split into 2 files. &nbsp;2 Slots fits cling wrap boxes 3 Slots is slightly smaller and fights wax paper and parchment paper boxes&nbsp;Mine holds Cling Wrap, Wax Paper, Parchment Paper and Foil

Kitchen Storage for Cling Wrap and Foil

KITCHEN

Kroeskoppie

Original Source Material: - Original Creator Blastoise Model: <a target="_blank" href="https://www.thingiverse.com/neb1236/designs" rel="nofollow noopener">neb1236</a> on <a target="_blank" href="https://www.thingiverse.com/thing:5162417" rel="nofollow noopener">Thingiverse.</a>- Original Creator AMS Version Blastoise Eyes: <a target="_blank" href="https://makerworld.com/en/u/3378101082" rel="nofollow noopener">Waikikiprod</a> on <a target="_blank" href="https://makerworld.com/en/models/13162#profileId-13157" rel="nofollow noopener">Makerworld</a>/<a target="_blank" href="https://www.printables.com/model/536623-bicolor-blastoises-eyes" rel="nofollow noopener">Printables</a>. Some small notes:  - Please support the original designers, they did the awesome job of making this model.  - For licences/selling the print: please contact the original designers, not me. I did not create this awesome model. - On 16-02-2024 , I created a printable version in Bambu Studio which should work on the A1 Mini. It has the same printing settings as the X1C/P1P/P1S version, but all the parts are divived on more plates, since the build plate on a A1 Mini Printer is quite a bit smaller. Maximum printtime for every plate has been reduced to 4 hours maximum because of this for ease of printing. - I am not able to test the A1 Mini Printing Profile, simply because I do not own this printer and only have a X1C. Use the profile on your own risk.  Description: A remix/share from the awesome Blastoise model. I have scaled all the parts to 150%, as I think a Blastoise should be bigger!This Blastoise is about 20 cm high and weights about 700 grams! I also did the following: - I used a 0.16 settings basefile I like and edited it. - I sorted all the different parts on different plates for easier printing, based on color. - The default eyes are replaced by the AMS version, which makes dual color printing possible. - I adjusted the flowrate in my settings profile so the coloring of the model should be the same overal. - I put ‘Ironing’ off in my settings profiles, since this would give coloring differences, most notable in the brown shell parts. - I fixed some of the more noticable parts that where having Top Layer Spheres by <a target="_blank" href="https://www.youtube.com/watch?v=h4SiDX0q0Xs&amp;list=LL&amp;index=1" rel="nofollow noopener">using this guide</a>.&nbsp;If there are more suggestions for better printing settings/profiles, please upload them!  The color sorting in the 3fm-file is based on the following filament that I used for this print: - Black: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B0BT9F3BCD/?_encoding=UTF8&amp;pd_rd_w=0HzkR&amp;content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&amp;pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&amp;pf_rd_r=NPE0CGVRYZDD97JQ8MTB&amp;pd_rd_wg=V4TwI&amp;pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&amp;ref_=pd_gw_ci_mcx_mr_hp_atf_m&amp;th=1" rel="nofollow noopener">eSUN PLA+ Black.</a> - Beige: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQH6H55/?_encoding=UTF8&amp;pd_rd_w=0HzkR&amp;content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&amp;pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&amp;pf_rd_r=NPE0CGVRYZDD97JQ8MTB&amp;pd_rd_wg=V4TwI&amp;pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&amp;ref_=pd_gw_ci_mcx_mr_hp_atf_m&amp;th=1" rel="nofollow noopener">eSUN PLA+ Beige</a>. - Blue: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQJ9H8F/?_encoding=UTF8&amp;pd_rd_w=0HzkR&amp;content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&amp;pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&amp;pf_rd_r=NPE0CGVRYZDD97JQ8MTB&amp;pd_rd_wg=V4TwI&amp;pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&amp;ref_=pd_gw_ci_mcx_mr_hp_atf_m&amp;th=1" rel="nofollow noopener">eSUN PLA+ Light Blue.</a> - White: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQ98RNP/?_encoding=UTF8&amp;pd_rd_w=0HzkR&amp;content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&amp;pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&amp;pf_rd_r=NPE0CGVRYZDD97JQ8MTB&amp;pd_rd_wg=V4TwI&amp;pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&amp;ref_=pd_gw_ci_mcx_mr_hp_atf_m&amp;th=1" rel="nofollow noopener">eSUN PLA+ Cold White.</a> - Brown: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQ75QG2/?_encoding=UTF8&amp;pd_rd_w=0HzkR&amp;content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&amp;pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&amp;pf_rd_r=NPE0CGVRYZDD97JQ8MTB&amp;pd_rd_wg=V4TwI&amp;pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&amp;ref_=pd_gw_ci_mcx_mr_hp_atf_m&amp;th=1" rel="nofollow noopener">eSUN PLA+ Brown.</a> - Grey: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B0BT9G9GMQ/?_encoding=UTF8&amp;pd_rd_w=0HzkR&amp;content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&amp;pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&amp;pf_rd_r=NPE0CGVRYZDD97JQ8MTB&amp;pd_rd_wg=V4TwI&amp;pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&amp;ref_=pd_gw_ci_mcx_mr_hp_atf_m&amp;th=1" rel="nofollow noopener">eSUN PLA+ Grey.</a> A complete timelapse video from all the plates/parts can be found here:<figure class="media"><oembed url="https://www.youtube.com/watch?v=sRZ0PQ6itUQ"></oembed></figure>

Blastoise 150% Multipart Color (20 cm height)

DO WANT

Step121

Ho realizzato una versione "short" dell'ugello per i Soffiatori Ego Power, compatibile con la serie LB5300/5800/7650Realizzato con la stampa 3D, ha una dimensione più corta dell'originale in modo da essere più maneggevole e pratico, quando si utilizza per l'asciugatura. Il diametro di uscita è da mm.68 di diametro in modo da aumentare la velocità di uscita dell'aria la punta è arrotondata per evitare che possa lasciare dei graffi. Il getto d'aria è quindi più concentrato e permette di portare via l'acqua velocemente.Articoli inclusi: - Tubo per soffiatore Articoli NON inclusi: - Soffiatore&nbsp;I created a "short" version of the nozzle for Ego Power blowers, compatible with the LB5300/5800/7650 seriesMade with 3D printing, it has a shorter size than the original so as to be more manageable and practical when used for drying. The outlet diameter is 68 mm in diameter in order to increase the air outlet speed. The tip is rounded to prevent it from leaving scratches. The air jet is therefore more concentrated and allows the water to be carried away quickly.Items included: - Blower hose Items NOT included: - Blower

Mods

KITCHEN

DO WANT

EGO