Desmondkzy

luckyluc.64

The best PTFE guide plus PTFE Release (no tools require).There it is. Many Makers asked me for this after seeing the one I designed for the AMS Hub.<a target="_blank" href="https://makerworld.com/en/models/73523#profileId-77971" rel="nofollow noopener">https://makerworld.com/en/models/73523#profileId-77971</a>Since the location is good, I didn&#39;t add a subplate and relocate the buffer. The drawback is that I only have a little wire management.&nbsp;In a certain way, it&#39;s better because there are no holes to tap or screws. It just &#34;Smap in place&#34;.It&#39;s also easy to assemble;-Release the two PTFEs from the buffer.-Snap the central part on top of the AMS Buffer. (See the pictures above) (injector end first and snap the other end)-Slide in the two PTFE guides and secure them with the &#34;C&#34; ring. (The longer one goes in the Injector side)-Push in the two PTFEs. Tug them back to see if they lock in place.It&#39;s ready to go. Thanks to the realignment of the PTFE in the fittings, you won&#39;t need other tools and will avoid jams.It&#39;s not a bad idea to chamfer the inside of the PTFE after cutting it.&nbsp;After printing, make sure the holes are clean. The guide should slide easily and freely into their mount. It may require a little filling in the bores.&nbsp;I did test it with PLA. And the small tube broke. Then, No, you can&#39;t use PLA.I test-printed it with PETg, which prints well for the P1P one. It works well, and no support is needed (But it can&#39;t hurt). I didn&#39;t have to file or sand the bore, but it may be required (Especially if you use generic material and print on a series P1; the flow is critical). The injector side guide must slide freely, and the PTFE should slide into the guide freely. It doesn&#39;t matter if the PTFE slides into the guide or the guide slides with the PTFE.Of course, I did make it in ABS. It&#39;s the best for me and my favorite BBL Blue ABS.&nbsp;It prints in an hour and a half in PETg and is even faster with ABS.Enjoy.

AMS Buffer Injector Guides

Printer

user_3291012792

您好 向你们介绍我的大画幅相机作品 free 617&nbsp;模块化，而且具有移轴 易于打印作为卖点，即使是打印机新手也可以轻松的完成打印 无需支撑 的设计&nbsp;目前可以使用，我个人使用250mm和180mm 镜头 同时留下了拓展改装所需要的螺丝孔位 &nbsp;没有遮光罩的图纸，我购买遮光罩于拼多多&nbsp;我觉得还需要完善，如果你完善了并能正常使用 请发布副本并@我 我没有时间持续完善了&nbsp;它可以非常轻松的在拓竹上面完成所有打印 所有零件经过验证&nbsp;我并不会上传说明书 因为这是非常自由的一套设计 连接板请根据自己的需求实现模块化或者单纯作为其他大画幅相机的后背使用 请自由的使用图形设计并组装你的相机 &nbsp;请根据你的材料和打印机适当的调整step文件取得更好的效果&nbsp;请注意，请在安装胶卷前务必打磨光滑&nbsp;需要自行准备的耗材&nbsp;MAMIYA UNIVERSAL 卡口需要用到胶水&nbsp;8x2mm磁铁&nbsp;m3自攻螺丝&nbsp;挡光插刀 遮光海绵&nbsp;65mm转接环和调焦筒&nbsp;70mm x 6的金属滚柱&nbsp;&nbsp;ender3 √ cr6se √ voron 1.9 （推荐）i3 mega √ &nbsp;xyz结构 √ （kp3s）&nbsp;如果你想要 销售，请联系我授权 或者发送您向任何一个慈善机构捐款至少8美元的付款凭证（每台）&nbsp;&nbsp;Hello, I would like to introduce my large format camera work, free 617.&nbsp;&nbsp;&nbsp;Modular and with a shift axis, it is easy to print as a selling point, even for beginners who can easily complete the printing without support design&nbsp;&nbsp;&nbsp;Currently available, I personally use 250mm and 180mm lenses while leaving screw holes for expansion and modification.&nbsp;&nbsp;&nbsp;I bought a light shield on Pinduoduo without a drawing of the light shield&nbsp;&nbsp;&nbsp;I think it still needs to be improved. If you have improved it and can use it normally, please post a copy and @ me. I don't have time to continue improving it.&nbsp;&nbsp;&nbsp;It can easily complete all printing on bamboo. All parts are verified&nbsp;&nbsp;&nbsp;I will not upload the instructions because this is a very free design. Please modularize the connection board according to your needs or simply use it as a back for other large format cameras. Feel free to use graphic design and assemble your camera.&nbsp;&nbsp;&nbsp;Please adjust the step file according to your material and printer to achieve better results&nbsp;&nbsp;&nbsp;Please note that it is necessary to grind the film smooth before installation&nbsp;&nbsp;&nbsp;Consumables that need to be prepared by oneself&nbsp;&nbsp;&nbsp;MAMIYA UNIVERSAL bayonet requires glue&nbsp;&nbsp;&nbsp;8x2mm magnet&nbsp;&nbsp;&nbsp;m3 self-tapping screw&nbsp;&nbsp;&nbsp;light-blocking blade&nbsp;Shading sponge&nbsp;&nbsp;&nbsp;65mm adapter and focusing barrel&nbsp;&nbsp;&nbsp;70mm x 6 metal roller&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ender3 √ cr6se √ voron 1.9 (recommended)i3 mega √&nbsp;&nbsp;&nbsp;xyz structure √ (kp3s)&nbsp;If you want to sell, please contact me for authorization or send a payment voucher for at least $8 donated to any charity (per unit).

Printer

Camera