Dennis

Hugo

<h2>NEW : parametric with Fusion 360 and STEP files available <a target="_blank" href="https://makerworld.com/en/models/377006" rel="nofollow noopener">here</a></h2>&nbsp;I enjoy printing my own storage boxes, but I don't like to add extra hardware like screws. That's why I designed these boxes.  I developed a completely new closing mechanism utilizing the natural elasticity of the plastic for a satisfying snap-close.<h4>Filaments used in the pictures : <a target="_blank" href="https://formfutura.com?aff=7" rel="nofollow noopener">Li</a><a target="_blank" href="https://formfutura.com/product/refill-petg/?aff=7" rel="nofollow noopener">nk</a></h4><ul><li>FormFutura Refill PETG Signal Blue</li><li>FormFutura Refill PETG Iron Grey</li></ul>&nbsp;<h3>How to choose your size :</h3>&nbsp;There are 36 different sizes available to accommodate your needs, with dimensions specified in the name of each STL file. The three numbers correspond to the inside dimensions of the box, the first one is the width, the second is the length and the third is the depth.For example, the "Box_bottom_60_60_50" describes the box with inside dimensions of 60mm x 60mm x 50mm :<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_h9g3z0yeu3ti.jpg"></figure>The top has only two dimensions (width and length), which should correspond to the first two numbers of the bottom.For example, the "Box_top_60_60" will match the following bottoms :<ul><li>“Box_bottom_60_60_25”</li><li>“Box_bottom_60_60_50”</li><li>“Box_bottom_60_60_75”</li><li>“Box_bottom_60_60_100”</li></ul>The "Box_clip" is necessary for each box. The narrowest boxes will require one, while all the other boxes will require two.&nbsp;All the STL files are already oriented for optimal printing. I recommend PETG and infill of 15% or more.&nbsp;<h3>Assembly :</h3>&nbsp;The top and bottom snap fit together. To assemble them, just press them onto a table like this :<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_oiifzqba65c6.jpg"></figure>It is important to assemble them with this specific orientation as a groove will aid in snapping them into place.I find it easier to assemble one of the two hinges first with a twisting motion, and then press the second hinge as described above.&nbsp;Then insert the clips with a twisting motion like this :<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_t5kzv6lq2e4s.gif"></figure>When they are instaled, they are very sturdy and will hold the box closed as long as they are in place.Just make sure to install them with the right orientation to ensure easy box opening. The face that was on the print bed should be facing outward :<figure class="image image_resized" style="width:61.55%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_tte3p1m9l6jn.jpg"></figure>&nbsp;Enjoy :)

SnapLock Storage Boxes

Huishouden

Eluded Studios

Introducing the Harvest Markers. A variety of markers to identify the plants in your garden. With plant names, shapes, and color, these will spice up the garden and help to easily identify what is planted.&nbsp;Each marker is placed on it&#39;s own plate for convenience of printing with Bambu Handy.&nbsp;2 profiles available, FaceUp includes standard rotations. FaceDown has flipped models for printing on it&#39;s face (for textured face on textured plate).&nbsp;&nbsp;UPDATE 5/31/24: 1 new marker added - In “Addition” profiles - Due to plate limit on originalUPDATE 5/24/24: 5 new markers added - In “Addition” profiles - Due to plate limit on originalUPDATE 4/30/24: 5 new markers added - In “Addition” profiles - Due to plate limit on originalUPDATE 4/21/24: 15 new markers added - In original profiles&nbsp;There are currently 46 different plants available, see images for all.&nbsp;If you have any requests for something specific in this style, please let me know, I will be happy to make more.&nbsp;If you would like to sell my models commercially, please consider joining the Patreon, I could use your support: <a target="_blank" href="https://patreon.com/EludedStudios?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">Patreon</a>&nbsp;If you wish to show your support for my work in way of donations, please buy me a coffee: <a target="_blank" href="https://www.buymeacoffee.com/eludedstudios" rel="nofollow noopener">Buy Me A Coffee</a>

Harvest Markers

Tuin

Siganberg

I really like the Festool Systainer and I have a few of them. The only thing not to like is that they are very expensive. &nbsp;This is a similar design to Festool Systainer Mini but more printable with minimal support requirements. &nbsp;Features:<ul><li>Stackable</li><li>250x171x71mm dimension. Will fit with Bambu printers except A1.</li><li>No glue or screws needed. Every part should snap together. </li><li>No carrying handle to maximize space inside. </li><li>Slot for sliding labels. </li><li>You can create your own foam insert or custom 3D print organizer/divider inside. </li></ul>&nbsp;Printing instruction:&nbsp;<ul><li>The body and lid require support. For the body, add support where the feet will be attached and also for the latch lock. For the lid, just add support for the feet alignment area. 0.28mm resolution is suggested</li><li>All other parts can be printed without support, the ideal resolution is 0.20mm. </li></ul>&nbsp;<h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://paypal.me/FMarasigan" rel="nofollow noopener">paypal</a> or <a target="_blank" href="https://www.buymeacoffee.com/siganberg" rel="nofollow noopener">buymecoffee</a>

Simple Printable Mini Systainer (Beta)

klussen

Razer05

toilet sign  WC Schild

Created By Wolf

Downhill_Solutions

<h2>Here is my Poop Pop Stop V2.1! (is also working on X1C now)</h2><h2>Update: 09.Jan.2024:</h2>- I got enough feedback to say it will now also work on X1C!- the front outer wall are now shorter and thinner, no more Z-Homing error- PTFE Cutting tool with fixing clamp for perfect hose length- Optimized tree-supports <figure class="image image_resized" style="width:63.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_72b3fa75e3ea.jpg"></figure>Notice:The Heatbed has play in the X and Y axes, you can see the GIF. If you have to less space between the Poop Pop Stop and the Heatbed, it can help to pull the bed carefully toward the front door to add some space.<figure class="image image_resized" style="width:46.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_382c00cd274ba.gif"></figure><h2>PTFE Cutting Tool:</h2><figure class="image image_resized" style="width:41.61%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_6556d0a830b0b.jpeg"></figure><figure class="image image_resized" style="width:47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_6fdda886fc02.jpeg"></figure><figure class="image image_resized" style="width:41.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_bf1bfb070340b.jpeg"></figure><figure class="image image_resized" style="width:45.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_7bbc6f3b0570c.jpeg"></figure><h3>For the perfect fit and quality like mine, do only use my uploaded printing-profile and ABS filament!</h3> The Problem at my prints was, that the Poop was pulled out of the <a target="_blank" href="https://eu.store.bambulab.com/de/collections/accessories-for-p1-series/products/purge-chute" rel="nofollow noopener">Purge Chute</a> at every filament change:<figure class="image image_resized" style="width:611.234px;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2023-12-21_a9b5c2be80bca.jpeg"></figure> The Solution is my Poop Pop Stop, it lets the nozzle change the filament without problems, and hold the filament waste back in the purge chute:<figure class="image image_resized" style="width:53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_62ff672b725c2.jpg"></figure><h2>The new Version V2.0 is a complete new design of the <a target="_blank" href="https://makerworld.com/de/models/102462#profileId-109116" rel="nofollow noopener">old Version</a> and contins the following changes:</h2>- the bottom layer and the print position are complete new designed without the level change for better print and look.- the poop stop area is now designed with PTFE hoses (you need them seperatly - i used the bambulab spare tubes) against sticking with print filament on the Poop Pop Stop itself.- the poop stop area use now a U-Cut instead of the V-Cut version- the thin front bridge is now stabilized with a vertical wall on the outside of the purge chute.- i added some cutouts in the washing area for the nozzle- the hole at the washing area for the nozzle is now bigger&nbsp;&nbsp;<h2>I tested the new design with a few printing-cubes with arround 50 filament changes and out of different materials (PLA / PETG / ABS), there was no problems on every material at my P1S:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_f764cad86e401.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_7542cf135e9a1.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_139fc6ebcdd46.jpeg"></figure><h2>IMPORTANT: This new Version needs some difficult work-steps:</h2>- remove the Support carefully with a knife untill you got a clean surface in this areas- slit the PTFE-hoses lengthwise (only no.2/3/4) , don't slit no.1!- press the tubes in the numbered order on the single part (no.2 you have to press it from the bottom side and turn it carefully onto the round bridge)-after the install of the hoses no.2-no.4, cut it off just to the surface of the component-Cut a radius on the end of the pipe no.1 as shown in the picture (make shure you got a Gap between the hoses arround 1-2mm, if not recut no.1 until the gap is big enough or bend it a little bit) Please do all the steps carfully and check your result for looking the same as my Poop Stop in the pictures!<figure class="image image_resized" style="width:51.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_241a0ab6f3704.jpeg"></figure><figure class="image image_resized" style="width:51.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_86dc94b441b87.jpeg"></figure><figure class="image image_resized" style="width:51.36%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_a9ab89056c62b.jpeg"></figure><figure class="image image_resized" style="width:51.46%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_484e5a68d15d7.jpeg"></figure><figure class="image image_resized" style="width:51.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_510df216c2b21.jpeg"></figure>&nbsp;<h2>Please give me feedback! :)</h2>

Poop Pop Stop V2.1 - for P1S / P1P / X1C (UPGRADE 09.01.2024)

3D printer

agepbiz

<figure class="media"><oembed url="https://www.youtube.com/watch?v=6RgBXBwwXBg"></oembed></figure>&nbsp;edit: 04.03.24 added accessories - canvas top (separate print, no support needed)&nbsp;Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version. I wanted to do a project where I used several tools and machines to tie it all together into one project&nbsp;The Jeep Kit Card: <a target="_blank" href="https://makerworld.com/en/models/223303#profileId-241285" rel="nofollow noopener">https://makerworld.com/en/models/223303</a> The Trailer: <a target="_blank" href="https://makerworld.com/en/models/428258#profileId-332362" rel="nofollow noopener">https://makerworld.com/en/models/428258</a>The Gun:<a target="_blank" href="https://makerworld.com/en/models/469311#profileId-378676" rel="nofollow noopener">https://makerworld.com/en/models/469311</a>&nbsp;Subscribe or follow me on: Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">www.instagram.com/agepbiz</a> YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">www.youtube.com/user/agepbiz</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">www.twitter.com/agepbiz</a>&nbsp;WARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.&nbsp;Printsettings: No support No raft 0,16mm layer height

Jeep Kit Card

Speelgoed

Fletch

This is one of my all time favorite games and locations. This map always reminds of the fun I had playing A Link to the Past with my siblings for hours when we were younger, hunting for the Master Sword or finding all of the chests in the dungeons throughout the world. Makes a great addition to any game room or just some wall art. I tried to make it as accurate as possible. With the size of model, I wasn&#39;t able to add some of the smaller details since they wouldn&#39;t print well. I hope you enjoy it!&nbsp;You can find the Dark World map here:<a target="_blank" href="https://makerworld.com/en/models/456194" rel="nofollow noopener">Zelda A Link to the Past - Dark World</a>&nbsp;A frame stand for displaying on a bookshelf or table can be found here:<a target="_blank" href="https://makerworld.com/en/models/456210" rel="nofollow noopener">Zelda A Link to the Past Map - Frame Stand</a>&nbsp;There is a separate profile for a frame with a hole in the back for hanging on the wall.&nbsp;ColorsGray - Overture PLA Plus Space GrayLight Brown - Overture PLA Plus BrownDark Brown - Hatchbox PLA BrownLight Green - Inland PLA Matte GreenDark Green - Elegoo PLA GreenBlue - Hatchbox PLA BlueRed - Hatchbox PLA RedBlack - Elegoo PLA Matte BlackYellow - Hatchbox PLA Yellow&nbsp;ProfilesThere are multiple profiles available to account for no AMS, one AMS, or two AMS. I have included mini profiles as well. It takes 9 colors to do the full color map and frame and I have provided a profile that will allow you to print all 9 colors using a single AMS.

Huishouden

Tuin

klussen

Created By Wolf

3D printer

Speelgoed

Kunst